Argco

Super Dope Anaerobic Thread Sealant Superdope is a State of the Art Anaerobic Thread Sealant that chemically hardens in the absence of air into a tough,structural solid. Only put on 1st, 2nd &...

3" x CLOSE Black Steel Nipple Connection Threaded At One End Black Steel, Schedule 40 WOG 150 PSI 150 At 150° F Saturated Steam Pressure 300. California Prop 65 WARNING WARNING: This product...

Indoor & Outdoor use Marks on Metal Patented valve-operated Paint-fed fiber tip Works on most surfaces Permanent Quick drying Water proof Highly visible Resists abrasions Fade resistant paint Oil...

Power Drive Housing Only Click here for Technical DataRIDGID® is a registered trademark of RIDGID, Inc.ARGCO is not an authorized distributor of RIDGID® products

4" OD x 1-3/4" ID x 1/32" thick Conceal oversized holes & cutting errors in ceiling tile Fire resistant plastic 1/32" thick Simply flex open and install around existing sprinkler drop. Forms to...

Sammy® CST 2 for Concrete. Made with The Original Tapcon®. 1/2" ROD 5/16" x 1 1-1/2" shank length 1/4" pre-drilled pilot hole required. Install with Sammy #14 (Black) Nut Driver Made in the U...

Purlin Clamp (Malleable Iron-Plain)(Cross Reference PHD Model 290)3/8"" rod sizeAlso available zinc platedStructural attachment to lower flange of metal beams or purlins with 45° flanges up to...

CPVC 90° Sidemount Two-Hole Strap 100 PER BOX 9 LBS Top or bottom beam installation Can be used as a restrainer from upward movement of the sprinkler head Galvanized steel, supplied with hex...

SuperWeld Anaerobic Weld Sealant Seeks out casting irregularities and penetrates the smallest pores or cracks. Wicking adhesive sealant prevents loosening of metal threaded fasteners. Designed for...

Rack Pack's come assembled with UL ULC/FM approved swinging hose rack, UL ULC/FM rack hose and approved nozzle. Standard Assembly Components: Hose Rack, Red Enamel Steel Rack Nipple 1½" Lined...

2" IPS FORGED BALL VALVE 400# STANDARD PORT Quality forged brass construction eliminates porosity Maximum temperature is 400° @ 100 PSI PTFE seats and seals 150 WSP Click here for Technical Data...

3/8" IPS FORGED BALL VALVE 400# STANDARD PORT Quality forged brass construction eliminates porosity Maximum temperature is 400° @ 100 PSI PTFE seats and seals 150 WSP Click here for Technical...

Pressure Relief Kit includes: Argco Pressure Relief Valve Pre-set 175 PSI 1/2"" x 1/2"" 12"" x 3/8"" tube with hose clamps Two Brass Fittings 3/8 X 1/2 Hose Barb X Male Pipe Elbow Two Pipe Nipples...

3-Way Gauge Valve 1/4"" IPS Permits inspector to check accuracy or replace gauge without shutting down entire line 200 psi Click here for Technical Data California Prop 65 WARNING WARNING: This...

OS&Y Gate Valve Ductile Iron Body Flanged UL Listed / FM Approved Design Standard: AWWA Connection Ends: Flange to ASME B16.1 CL 125 Stem drive by keys, parallel or diagonal square or flat head...

Fire Protection Flanged Check Valve 2"" Ductile Iron RedApplication: Backflow PreventionWorking Pressure: 300 PSITemperature Range: 32° to 176° FCan be installed Horizontally or VerticallyUL...

The PT Model 1206 Stand works with RIDGID® 300 (41855) Power Drive making it easier to bring this powerful machine into the field instead of being mounted on a work bench. Stand...

Riptide Single Action Water Diffuser with built in pitot.With FIVE different unique diffuser models, and as many as FOUR 2.5" streams in a SINGLE diffuser, The Riptide Flow Testing...

Set of 4 replacement screws for Universal Die Head Click here for Parts Breakdown RIDGID® is a registered trademark of RIDGID, Inc. ARGCO is not an authorized distributor of...

Universal sprinkler stopper device, stops water damage caused by an open sprinkler head without shutting down the entire system. Simply push rubber stop into opening of sprinkler...

Capacity: 1/8" to 2" IPS Click here for Parts Breakdown (PDF) RIDGID® is a registered trademark of RIDGID®, Inc. ARGCO is not an authorized distributor...

Standard 2L Arbor fits 20L through 96L Hole Saws (1-1/4" - 6" sizes)1/2" Drill ChuckHardened Carbon Steel Click here for Technical Data UPC: 886815007409

Reamer Assembly for Threading Machine Cross Reference Model 341 #42365 Click here for Parts Breakdown (PDF) RIDGID® is a registered trademark of...

Carriage and Lever Assembly Cross Reference: Model 311 & 312 68815 Click here for Parts Breakdown (PDF) RIDGID® is a registered trademark of RIDGID, Inc. ARGCO is...

Universal High Speed Steel Threading Dies Cross Reference: 47765 Money back guarantee on all of ARGCO's pipe threading tools. ...

Variable pitch holesaws that cut any wood, metal or plastic and can be used in a wide variety of applications from production to maintenance to the the electrical building trades. ...

Two Tools in One. Chucks into Ridgid® 300 Power Drive for Power Grooving or Manually Roll Groove in place, without power. The only TRUE Portable Schedule 40 Groover for up...

Solid Cast Chrome Plated Brass Split Wall Plate . 1/2" IPS with set screw Split & Tabbed for Retrofit Click here for Technical Data (PDF)

Technical FeaturesHole size: full inside diameter of outlet size NominalOutlet: 1/2?, 3/4?, 1?, 1-1/4?, 1-1/2?, 2?, 2-1/2?Approvals: UL, FMApplication: ASTM A53-B, ASTM A106-BButt...

PT 44815 Brush Set fits RIDGID® 700 Hand Held Power Drive Cross Reference 44815 Brush Assembly (2) Click here for Parts Breakdown (PDF)RIDGID® is a...

Solid Cast Chrome Plated Brass Wall Plate. 1/2"IPS with set screw Click here for Technical Data

Standard 401 with Standard 401 Cup - Put together as a set General Character: Type 1010-1018 mild steel 0.40 - 0.42 mm thick 1/2" and 3/4" IPS Available Chrome Plated or...

Model 551 Riser Clamp (Galvanized) Function: Designed for supporting and stabilizing vertical pipe runs. Clamp is designed for standard iron pipe O.D. and must be considered...

Heat collector - 12" x 12" (1/2" IPS hole) Powder coated white .040 aluminum. (100 per case) Click here for Technical Data (PDF)

Sight Glass 1" IPS with restricted orifice. Flow indicator with 1/2" restricted orifice for inspector's test flow of 200 psi. Click Here for Tech Data ...

Welding Outlet (Male Thread) ULC Listed / FM Approved Carbon Steel Welding Face with Saddle Shaped Design, easy for welding Click here for Technical Data (PDF) ...

Solid Cast Galvanized Steel Wall Plate 1/2" IPS with Set Screw. (100 per case) Click here for Technical Data

PT® Drop Head Set 1/2" NPT Complete with dies Comparable to 12R style dies Fits hand ratchet threader and RIDGID® 700 power hand threader. Cross...

Model 550 Riser Clamp Function: Designed for supporting and stabilizing vertical pipe runs. Clamp is designed for standard iron pipe O.D. and must be considered when sizing...

Hose Bibb 1/2" Male IPS x Hose Quarter Turn Brass Click here for Technical Data (PDF) California Prop 65 WARNING WARNING: This product can expose you to chemicals and or materials that are...