Test Caps and Plugs

2" PVC Techno Test Plug Cap Fits 2" DWV pipe. Heavy duty PVC. High pressure tested to over six stories. Easily solvent cemented over end of DWV pipe. Will not clog or go down in pipe.

4" Knock-Out Plug/ Test Cap 4" Pipe "“ White polystyrene insert type "“ Disposable "“ Use with plastic waste and drain pipe for leak testing

3" Knock-Out Plug/ Test Cap 3" Pipe "“ White polystyrene insert type "“ Disposable "“ Use with plastic waste and drain pipe for leak testing

4" PVC Deep Techno Test Plug Cap Fits 4" DWV. Heavy duty PVC. Pressure tested to over six stories. Deep design is easily glued over end of DWV pipe and helps adequately cover unevenly cut pipe...

2" Knock-Out Plug/ Test Cap 2" Pipe "“ White polystyrene insert type "“ Disposable "“ Use with plastic waste and drain pipe for leak testing

1-1/2" PVC Techno Test Plug Cap Fits 1-1/2" DWV pipe. Heavy duty PVC. High pressure tested to over six stories. Easily solvent cemented over end of DWV pipe. Will not clog or go down in pipe.

3" PVC Techno Test Plug Cap Fits 3" DWV pipe. Heavy duty PVC. High pressure tested to over six stories. Easily solvent cemented over end of DWV pipe. Will not clog or go down in pipe.

2" PVC Deep Techno Test Plug Cap Fits 2" DWV. Heavy duty PVC. Pressure tested to over six stories. Deep design is easily glued over end of DWV pipe and helps adequately cover unevenly cut pipe...

4" PVC Techno Test Plug Cap Fits 4" DWV pipe. Heavy duty PVC. High pressure tested to over six stories. Easily solvent cemented over end of DWV pipe. Will not clog or go down in pipe.

2" T-cone Cleanout Repair Plug EASILY REPAIRS DAMAGED OR CORRODED METAL OR PLASTIC CLEANOUT THREADS.  

2" Galvanized Mechanical Test Plugs Galvanized Steel Flanges with Molded Rubber Gaskets. Fits both cast iron and PVC pipe. Fits minimum pipe ID 1.96″ and maximum pipe ID 2.25″. Maximum back pressure...

1-1/2" T-cone Cleanout Repair Plug FITS 1-1/2″ PIPE. REPAIRS DAMAGED PIPE THREADS.  

4" Galvanized Mechanical Test Plugs Galvanized Steel Flanges with Molded Rubber Gaskets. Fits both cast iron and PVC pipe. Fits minimum pipe ID 3.78″ and maximum pipe ID 4.5″. Maximum back pressure...

2" Heavy Plastic Test Plug with Metal Bolt and Wing Nut WITH METAL BOLT AND WING NUT. HEAVY PLASTIC FLANGES WITH MOLDED RUBBER GASKETS. FITS BOTH CAST IRON AND PVC PIPE.  

2" T-cone Test Plug COMBINATION CLEANOUT AND TEST PLUG. NO METAL PARTS TO RUST. TESTS UP TO 3 STORIES OF HEAD PRESSURE. POSITIVE SEALING. U.S. PATENT #4,506,705.  

1-1/4"- 2" Inflatable Water/ Air Test Plug Fits 1-1/4", 1-1/2" & 2" Pipes "“ For Pressure Testing Drain Lines "“ User Safe: Pre-Set Pressure Relief Valve Prevents Over-inflation "“ Holding Power:...

2" Flexible Heavy Duty Test Cap Fits 2″ DWV pipe. Can be used on cast iron, PVC, ABS, steel pipe. Meets UPC, BOCA, CSA, Southern Building Code and other building codes. EPDM material with 300 series...

3" Pneumatic Clean-out Test Tee Plug Designed for testing plumbing lines above the cleanout tee. Design of plug will allow for passing of test water or air by deflating the plug. Threads directly...

3" PVC Deep Techno Test Plug Cap Fits 3" DWV. Heavy duty PVC. Pressure tested to over six stories. Deep design is easily glued over end of DWV pipe and helps adequately cover unevenly cut pipe...

4" - 6" Inflatable Water/ Air Test Plug FITS 4″, 5″ AND 6″ PIPES. FOR PRESSURE TESTING DRAIN LINES. USER SAFE: PRE-SET PRESSURE RELIEF VALVE PREVENTS OVER-INFLATION. HOLDING POWER: MULTI-RIBBED BODY...

4" Flexible Rubber Cleanout / Test Cap Fits 4" DWV pipe. Can be used on cast iron, PVC, ABS, steel pipe. Meets UPC, BOCA, CSA, Southern Building Code and other building codes. EPDM material with 300...

6" Galvanized Mechanical Test Plugs Galvanized Steel Flanges with Molded Rubber Gaskets. Fits both cast iron and PVC pipe. Fits minimum pipe ID 5.62″ and maximum pipe ID 6.4″. Maximum back pressure...

3" Galvanized Mechanical Test Plugs Galvanized Steel Flanges with Molded Rubber Gaskets. Fits both cast iron and PVC pipe. Fits minimum pipe ID 2.86″ and maximum pipe ID 3.25″. Maximum back pressure...

3"- 4" Inflatable Water/ Air Test Plug FITS 3″ AND 4″ PIPES. FOR PRESSURE TESTING DRAIN LINES. USER SAFE: PRE-SET PRESSURE RELIEF VALVE PREVENTS OVER-INFLATION. HOLDING POWER: MULTI-RIBBED BODY...

8" Flexible Rubber Cleanout/ Test Cap Fits 8" DWV pipe. Can be used on cast iron, PVC, ABS, steel pipe. Meets UPC, BOCA, CSA, Southern Building Code and other building codes. EPDM material with 300...

1-1/2" Flexible Heavy Duty Test Cap Fits 1-1/2" DWV pipe. Can be used on cast iron, PVC, ABS, steel pipe. Meets UPC, BOCA, CSA, Southern Building Code and other building codes. EPDM material with...

1-1/2" Flexible Rubber Cleanout / Test Cap Fits 1-1/2" DWV pipe. Can be used on cast iron, PVC, ABS, steel pipe. Meets UPC, BOCA, CSA, Southern Building Code and other building codes. EPDM material...

1-1/2" Galvanized Mechanical Test Plugs Galvanized Steel Flanges with Molded Rubber Gaskets. Fits both cast iron and PVC pipe. Fits minimum pipe ID 1.44″ and maximum pipe ID 1.65. Maximum back...

1-1/2" Heavy Plastic Test Plug with Metal Bolt and Wing Nut WITH METAL BOLT AND WING NUT. HEAVY PLASTIC FLANGES WITH MOLDED RUBBER GASKETS. FITS BOTH CAST IRON AND PVC PIPE.  

1-1/2" Knock-Out Plug/ Test Cap 1-1/2" Pipe - White polystyrene insert type - Disposable - Use with plastic waste and drain pipe for leak testing

1-1/2" PVC Deep Techno Test Plug Cap Fits 1-1/2" DWV. Heavy duty PVC. Pressure tested to over six stories. Deep design is easily glued over end of DWV pipe and helps adequately cover unevenly cut...

1-1/2" Slip-on Plastic Cap ORANGE COLOR

1-1/2" T-cone Test Plug COMBINATION CLEANOUT AND TEST PLUG. NO METAL PARTS TO RUST. TESTS UP TO 3 STORIES OF HEAD PRESSURE. POSITIVE SEALING. U.S. PATENT #4,506,705.  

1-1/2" x 2" PVC Dual Fit Test Cap TESTS 1-1/2"& 2" SCHEDULE 40 DWV PIPE. EACH CAP FITS TWO SIZES OF SCHEDULE 40 PIPE. MODERATE PRESSURE CAP. HIGHER PRESSURE RATED THAN KNOCK-OUT PLUG TEST / CAPS.

10"- 12" Inflatable Water/ Air Test Plug Fits 10" and 12" Pipes - For Pressure Testing Drain Lines - User Safe: Pre-Set Pressure Relief Valve Prevents Over-inflation - Holding Power:...

2" Flexible Rubber Cleanout / Test Cap Fits 2" DWV pipe. Can be used on cast iron, PVC, ABS, steel pipe. Meets UPC, BOCA, CSA, Southern Building Code and other building codes. EPDM material with 300...

2" Pneumatic Clean-out Test Tee Plug Designed for testing plumbing lines above the cleanout tee. Design of plug will allow for passing of test water or air by deflating the plug. Threads directly...

2" TO 3" INFLATABLE LONG WATER/ AIR TEST PLUG FITS 2″ TO 3″ PIPES. DESIGNED WITH 2 STAGE DEFLATION, ALLOWING ACCESS PIPE TO REMAIN SEALED WHILE WATER CLEARS DRAIN LINE. INCLUDES 48″ AIR HOSE.  

2' Pneumatic Extension Hose

3" Flexible Heavy Duty Test Cap Fits 3" DWV pipe. Can be used on cast iron, PVC, ABS, steel pipe. Meets UPC, BOCA, CSA, Southern Building Code and other building codes. EPDM material with 300 series...