Decorative Kitchen and Bath

1/2" FPT Straight Log Lighter Valve w/ Key & Escutcheon- PVD Polished Brass 1/2" x 1/2" female pipe threads. Comes with valve, escutcheon and 2-1/2" x 1/4" key. CSA approved. BTU rating: 120,000. If longer escutcheon is needed use 1/2" coupling and 1/2"...

1/2" FPT Angle Log Lighter Valve w/ Key & Escutcheon- PVD Polished Brass 1/2" X 1/2" Female Pipe Threads. Comes w/ Valve, Escutcheon and 2-1/2" X 1/4" Key.

Two Leg Log Lighter Burner (LP Gas) 14? length. 1-3/4? height. 2-1/4? wide. Comes with two 1/2? plugs with close nipple orifice. Ledge over burner holes prevents clogging.

Two Leg Log Lighter Burner (Natural Gas) 14? length. 1-3/4? height. 2-1/4? wide. Comes with two 1/2? plugs with close nipple orifice. Ledge over burner holes prevents clogging.

"T" Log Lighter Burner w/ Center/End Connection- LP Gas 12-1/4"Lx 1-3/8"H with 1/2" IPS connection in center and ends.

"T" Log Lighter Burner w/ Center/End Connection- Natural Gas

Log Lighter w/ Tee Connection - Natural Gas

Straight Log Lighter w/ End Connection - LP Gas LOG LIGHTER /ST. L P GAS / FOR USE W/ REAL LOGS- 30,000 BTU

Straight Log Lighter w/ End Connection - Natural Gas LOG LIGHTER /STRAIG./NAT.GASFOR USE W/ REAL LOGS- 30,000 BTU

Rectangular Log Lighter Burner w/ Removable Lid

Round Log Lighter Burner - LP Gas 1-3/4? height. 4-1/2? wide. Tapped 1/2? IPS in bottom and sides. Supplied with close nipple orifice and 1/2? plug.

Round Log Lighter Burner - Natural Gas 1-3/4? height. 4-1/2? wide. Tapped 1/2? IPS in bottom and sides. Supplied with close nipple orifice and 1/2? plug.

2" OD Heavy Faucet Hole Cover - White 2" Outside diameter. 3 pieces. If longer length is needed, bolt can be replaced w/ 1/4" stove bolts from any hardware store.

2" OD Heavy Faucet Hole Cover - PVD Stainless Steel 2" Outside diameter. 3 pieces. If longer length is needed, bolt can be replaced w/ 1/4" stove bolts from any hardware store.

2" OD Heavy Faucet Hole Cover - PVD Satin Nickel 2" Outside diameter. 3 pieces. If longer length is needed, bolt can be replaced w/ 1/4" stove bolts from any hardware store.

2" OD Heavy Faucet Hole Cover - Flat Black 2" Outside diameter. 3 pieces. If longer length is needed, bolt can be replaced w/ 1/4" stove bolts from any hardware store.

2" OD Heavy Faucet Hole Cover -Biscuit 2" Outside diameter. 3 pieces. If longer length is needed, bolt can be replaced w/ 1/4" stove bolts from any hardware store.

1-3/4" OD Faucet Hole Cover- White 1-3/4" Outside Diameter. 3 Pieces

Decorative Faucet Hole Cover - Polar White

Decorative Faucet Hole Cover - Satin (brushed) Nickel

Decorative Faucet Hole Cover - Oil Rubbed Bronze

Decorative Faucet Hole Cover - Chrome Plated

Decorative Faucet Hole Cover - Black

Decorative Faucet Hole Cover - Almond

Dual Thread Slotted Faucet Aerators- 2.5 GPM - PVD Polished Brass Male Outside Threads- 15/16"- 27 Threads, Female Threads - 55/64"- 27 Threads