Bath

1-1/4" Lift & Turn Drain Tub Drain - Will fit 1-1/4″ or 1-1/2″ w/ Brass Bushing. Solid Brass. Screw in handle design. 1-1/4″ Fine Threads Drain w/ 1-1/2″ Coarse Threads  

Toe Touch Cartridge Gasket REPLACEMENT GASKET FOR TTRC516 & TTRC38  

1-1/2" Gerber Style Bath Drain w/ Strainer- Chrome Plated 1-1/2″ COARSE THREAD. FINISHED STRAINER AND SCREW.  

1-1/8" White Rubber Basin/Tub Stopper Hollow to increase flexibility.  

1-1/2" MPT x 1-1/4" FPT (1-3/8") Brass Tub Drain Conversion Bushing Converts 1-1/4″ (1-3/8″) tub drain to 1-1/2″ coarse threads  

Add-A-Shower Diverter Spout & 61" Riser (3/8" IPS) 61″ RISER (3/8″ IPS), SHOWER HEAD 2.5 GPM @ 80 PSI LESS SHOWER ROD  

Shower Diverter Valve- Lever Type- Chrome Plated CHROME PLATED BRASS  

OVERFLOW FACE PLATE- OLD STYLE ROUND. 1 HOLE W/ SCREW  

8-1/2" Two Piece Tub Spout w/ Nose Diverter- Chrome Plated 1/2″ MIP CONNECTION AT WALL-END OF SPOUT  

Adjustable Tub Spout w/ Nose Diverter- Chrome Plated 5-3/8″ Length zinc body. Adjusts up to 1″. 1/2″ or 3/4″ IPS connection (with reducing bushing).  

1/2" Handi-plug Combination test plug and stub-out for drop eared ell. No tools required – manual installation allows for no time wasted applying and removing thread tape after each use!...

7" Length (1/2cts) Long Tub Spout with Front Diverter Zinc die cast. 1/2″ copper slip connection. 2-3/4″ minimum nipple length from wall. 4-1/4″ maximum nipple length from wall. 2-7/16″ OD of spout...

1-1/4" (1-3/8") Lift/ Turn Tub Drain- Chrome Plated Chrome plated zinc die cast. 1-3/8″ NPSM (1-5/8″-16 UNC) 16 threads per inch. Fine threads.  

1-1/4" Bath Drain Trim Less Stopper- Chrome Plated CHROME PLATED BRASS. 16 THREADS. (FINE)  

1" Brass Water Saver Shower Head w/ Volume Control- Chrome Plated 1/2″ FIP Connection. Meets ANSI A112-18-IM 1979. Adjustable Spray 1.80 GPM @ 80 PSI  

1/2" IPS Tub Spout w/ Back Diverter and Side Shower Adapter- Chrome Plated 5 1/4″ length zinc body. 1/2″ IPS outlet for hand held shower with 3/4″ to 1/2″ reducing bushing.  

5' x 1" OD "D" Bar Curtain Rod w/ 24" Ceiling Support and Flange POLISHED ALUMINUM. 4PCS. 26″ WIDE X 5′ LONG  

ACRYLIC TOWEL RING W/ EXPOSED SCREWS CHROME PLATED ZINC DIE CAST. COMES W/ SCREWS. QUICK INSTALLATION.  

Double Offset Bath Supplies for Leg Tub Faucet- Chrome Plated Chrome plated brass. 1/2″ OD x 21-1/2″ w/ bell flanges. Comes with 2pcs of each: supply lines, nuts, washers and bell flanges.  

Jumbo Shower Rod Flange- Chrome Plated ZINC DIE CAST. FITS 1″ OD ROD.  

Tub Spout w/ Nose Diverter 1/2" FIP, 5-1/4" Overall Length- Chrome Plated Material is chrome plated zinc diecast. 1/2″ FIP thread connection at spout.  

1/2" IPS Utility Shower w/ Soap Dish- Chrome Plated Chrome plated brass 1/2″ union for threaded or sweat. Includes valve (3″ centers), 24″ galvanized riser, soap dish and showerhead. Valve is...

2-3/16" MPT x 1-7/8" FPT Drain Bushing for Kohler 2-3-16 18 tpi x 1-7/8″ 14 tpi threaded brass bushing for Kohler bath drain. 15/16″ tall.  

7" Length (1/2ips) Long Tub Spout with Nose Connection Zinc die cast. 1/2″ connection at nose end of spout. 4-1/4″ maximum nipple length from wall. 2-7/16″ OD of spout at wall. Width at nose of...

Cover Plate for 2 Handle Shower- Chrome Plated Two hole. Made of polished stainless steel. 1-3/8″ hole diameter. Conceals damaged/ cracked tiles. Do not use abrasive cleaners.  

Mirror Finish 1-Hole Cover Plate for Tub/ Shower Valve COVERS UNWANTED VALVE CUT-OUT HOLES  

Mirrored Acrylic Cover Plate for 2-Handle Shower Diverter

Replacement Diverter Spout for Add-a-shower (#AASDSR)  

1" Brass Water Saver Shower Head Less Volume Control- Chrome Plated (2.0 to 2.5 GPM) 2″ FIP Connection. Meets ANSI A112-18-IM 1979. Adjustable spray. 2.0 GPM @ 80 PSI  

1" x 5' Aluminum Angled Shower Rod 1″ OUTSIDE DIAMETER X 5′ LENGTH. MADE OF ALUMINUM.  

1" x 5' Curved Shower Rod w/ Flanges- Brushed Stainless Steel 44″ to 72″ length. Adds up to 9″ more room. 22 Gauge.  

1" x 5' Curved Shower Rod w/ Flanges- Chrome Plated. Hardware Included. ADDS UP TO 9″ MORE ROOM/ 22 GAUGE  

1" x 6' ALUMINUM ANGLED SHOWER ROD 1″ OUTSIDE DIAMETER X 6′ LENGTH. MADE OF ALUMINUM.  

1-1/2" Bath Drain Trim Less Stopper CHROME PLATED BRASS. 11-1/2 THREADS. (COARSE)  

1-1/2" Lift/ Turn Tub Drain- Chrome Plated Chrome plated zinc die cast. 11-1/2 tpi coarse threads.  

1-1/2" Toe Touch Drain (11-1/2" Coarse Threads) CHROME PLATED ZINC BODY. 11-1/2 THREADS. (COARSE) COMPLETE W/ WASHER  

1-3/4" 2.5 GPM Die Cast Shower Head- Chrome Plated 1/2″ FIP CONNECTION. 2.5 GPM  

1-3/4" Heavy Brass Shower Head- Chrome Plated 1/2″ FIP CONNECTION 2.5 GPM @ 80 PSI  

1-3/4" Plastic Shower Head (2.5gpm)- Chrome Plated 1/2″ FIP CONNECTION. ADJUSTABLE FACE. 2.5 GPM  

1-3/4" Shower Head w/ Brass Ball (2.5gpm)- Chrome Plated HEAVY DUTY W/ BLACK FACE 2.5 GPM