Braxton Harris

1-1/2" x 3" Stud Protector (Guard) 18 Gauge GALVANIZED STEEL. 1-1/2" WIDTH. 3" LENGTH. PROTECTS PIPE DURING INSTALLATION.

1/4" x 1-1/4" Zinc Plated Stove Bolt w/ Nut 1/4" DIAMETER. 1-1/4" LENGTH.

12" x 12" Plastic Access Cover MADE OF HIGH IMPACT POLYSTYRENE. EDGES ARE BEVELED AND COMES WITH 4 COUNTERSUNK SCREW HOLES.

1/2" Barb X 3/4" FHT Swivel Hose Barb ALL BRASS. 1/2″ HOSE BARB X 3/4″ FEMALE GARDEN HOSE THREAD  

Flush Valve Disc for Mansfield (7410009, 210 & 211) Replaces Mansfield #7410009. Fits #210 & 211 flush valves.  

5/16" x 2-1/4" Closet Bolt Set w/ Round Washers- Paired Each Bag Includes: 2pcs- 5/16" Threads x 2-1/4" Length Brass Plated Bolts 2pcs- Chrome Plated Zinc Round Washers, 2pcs- Chrome Plated 5/16"...

2" PVC Techno Test Plug Cap Fits 2" DWV pipe. Heavy duty PVC. High pressure tested to over six stories. Easily solvent cemented over end of DWV pipe. Will not clog or go down in pipe.

4" Knock-Out Plug/ Test Cap 4" Pipe "“ White polystyrene insert type "“ Disposable "“ Use with plastic waste and drain pipe for leak testing

3/4" Sch 40 PVC One Piece P-trap SMOOTH FLOWING 1 PIECE PVC.  

2" Knock-Out Plug/ Test Cap 2" Pipe "“ White polystyrene insert type "“ Disposable "“ Use with plastic waste and drain pipe for leak testing

3" Knock-Out Plug/ Test Cap 3" Pipe "“ White polystyrene insert type "“ Disposable "“ Use with plastic waste and drain pipe for leak testing

1-1/2" Sewer Relief Valve DESIGNED FOR USE IN OUTSIDE CLEANOUTS TO ELIMINATE COSTLY DAMAGE DUE TO SEWAGE BACK-UP. FITS 1-1/2″ CAST IRON OR PLASTIC PIPES. PROVIDES A VISIBLE WARNING THAT SEWAGE IS...

Top Hat Washer for American Standard (Aqua Seal #72940-07) Replaces Aqua Seal #72940-07. For two handle faucets.  

4" PVC Deep Techno Test Plug Cap Fits 4" DWV. Heavy duty PVC. Pressure tested to over six stories. Deep design is easily glued over end of DWV pipe and helps adequately cover unevenly cut pipe...

6" Water Meter Box Extension PLASTIC – FITS BBH # WMB, WMBMRL  

3-1/2" IPS PVC Raised Head Cleanout Plug  

1-1/2" CTS x 1-1/2" (or 1-1/4")Tubular Flexible Drain and Trap Connector 1-1/2″ CTS x 1-1/2″ tubular or 1-1/2″ CTS x 1-1/4″ tubular. Connects 1-1/2″ copper to 1-1/2″ or 1-1/4″ plastic pipe. Rubber...

1/2" Zinc Plated Flat Washer 1/2" Inside Diameter. Zinc Plated Finish.

2" Sewer Relief Valve

1-1/2" Plastic P-trap w/ Adapter (poly slip joint washers) 1-1/2″ tubular. Made of white polypropylene plastic. Includes: 3pcs wing nuts, 3pcs poly slip joint washers, 1pc DWV trap adapter.  

1-1/2" PVC Techno Test Plug Cap TTPC112 PVC Techno Test Plug Cap is a heavy-duty PVC test cap designed to fit 1-1/2" DWV pipe. It is easily solvent cemented over the end of the pipe to provide a...

"2 PSI GAS" Line Marking Labels (100pcs/roll)  

1/2" IPS Low Pattern Flange- Chrome Plated SURE GRIP ESCUTCHEON. CHROME PLATED. FLANGE WIDTH IS 2-1/2".

5/16" X 3-1/2" Closet Bolt Set w/ Round Washers- Bulk Includes: 1pc- 5/16" Threads x 3-1/2" Length Brass Plated Bolt, 1pc- Zinc Plated Round Washer, 1pc- Chrome Plated 1/4" Open Acorn Hex Nuts

15-1/2" x 10-1/4" Water Meter Box Reading Lid Only

3" PVC Inside Pipe Drain w/ 3-1/2" Nickel Bronze Strainer Strainer is 3/16″ thick, 3-1/2″ OD with 2-3/8″ screw to screw centers. Replacement strainer is RSC238-312NB.  

3" x 18" 18 Ga Galvanized Steel FHA Strap (6-hole varied pattern) Varied six hole pattern on each side.

3" Sewer Relief Valve DESIGNED FOR USE IN OUTSIDE CLEANOUTS TO ELIMINATE COSTLY DAMAGE DUE TO SEWAGE BACK-UP. FITS 3″ CAST IRON OR PLASTIC PIPES. PROVIDES A VISIBLE WARNING THAT SEWAGE IS BACKING UP...

14.1 oz Mapp Pro* Gas Cylinder FOR USE WITH TORCHES AND MOST PORTABLE APPLIANCES REQUIRING MAPP GAS FUEL. BURNS MUCH HOTTER THAN PROPANE (at 3300 degrees F)ALLOWING LIGHT BRAZING OF COPPER, STEEL,...

3" PVC Techno Test Plug Cap Fits 3" DWV pipe. Heavy duty PVC. High pressure tested to over six stories. Easily solvent cemented over end of DWV pipe. Will not clog or go down in pipe.

1" CTS Solid Copper 2-hole Tube Strap SOLID COPPER. 1" COPPER TUBE SIZE.

3/8" FPT Black Malleable Banded 90º Elbow

3/8" x 1-1/2" Black Iron Nipple Meets ASTM A-53 Specs

3/4" MHT x 3/4" MPT x 1/2" FPT Brass Hose Nipple Adapter 3/4″ MALE HOSE THREAD X 1/2″ FEMALE PIPE THREAD X 3/4″ MALE PIPE THREAD BRASS GARDEN HOSE FITTING  

1-1/4" Lift & Turn Drain Tub Drain - Will fit 1-1/4″ or 1-1/2″ w/ Brass Bushing. Solid Brass. Screw in handle design. 1-1/4″ Fine Threads Drain w/ 1-1/2″ Coarse Threads  

3/4" MIP x 1/2" FIP Brass Face Bushing 3/4" MALE PIPE THREADS X 1/2" FEMALE PIPE THREADS.

4" Lead Fit-All Plug FITS 4″ PIPE. CAST IRON CORE.

1-1/2" PVC Trap Adapter (Marvel Adapter) 1-1/2″ Schedule 40 x 1-1/2″ Threaded. White PVC plastic. Includes nut and washer.  

1-1/2" CTS 2-Hole Pipe Clamp 1-1/2" Copper Tube Size. Fits copper, CPVC, and polybutylene.

2" No-Hub Coupling No-hub couplings are used to join no-hub cast iron soil pipe and fittings. Made in accordance with Cast Iron Soil Pipe Institute Standard (CISPI) #310. Couplings are shipped as...