Braxton Harris

3/4" Thick Sponge Closet Gasket (3-1/2" I.D. x 5-3/8" O.D.) For Setting Most Floor-Mounted Toilets. Replaces Wax Ring  

3/4"x1/2" Threaded Yellow Brass Hex Bushing- Lead Free

Heavy Duty Force Cup Plunger w/ Wood Handle

2" PVC Snap-in Cleanout w/ Plug 2″ PIPE SIZE X 1-1/2″ IPS (1-7/8″ OD) INTERNAL PIPE CLEANOUT. SOLVENT WELDS OR SIMPLY IS INSERTED INSIDE 2″ SCHEDULE 40 DWV PIPE. ALLOWS PIPE TO BE CUT FLUSH WITH FLOOR OR WALL. COUNTERSUNK PLUG...

Blade for # L50 Cutter MADE OF DURABLE MOLYBDENUM VANADIUM STAINLESS STEEL.  

1" MPT Brass Hose Bibb

1-1/2" PVC Ball Valve- Solvent Weld ONE PIECE CONSTRUCTION. EPDM SEATS. EPDM O-RINGS. SUITABLE FOR SWIMMING POOLS. 1/4 TURN OPERATION. RATED AT 150 PSI. SOLVENT ENDS COMPLY WITH ASTM D2466. NOT FOR USE WITH COMPRESSED AIR.  

1/4" x 8' Graphite Coated Stem Packing 1/4 lb. 1/4″ thick. 8 feet long in resealable spool. 1/4 lb. Non-asbestos graphite coated. Max temp of 150 degrees Fahrenheit. Widely used for repairs to radiator valves, water pumps, faucet stems, etc. ...

4" X 3" Standard Cast Iron Closet Flange Fits 4″ Pipe and 3″ Depth. Caulk Connection. Notched and Slotted.  

1-1/4" CTS Short Brass Compression Coupling- Lead Free 1-1/4″ COPPER TUBE SIZE, 1″ IRON PIPE SIZE, 3″ LENGTH, MAXIMUM PRESSURE: 125 PSI, MAXIMUM TEMPERATURE: 140 DEGREES FAHRENHEIT. ALL COMPRESSION COUPLING MUST BE RESTRAINED ON ENDS.

1" Insert x 3/4" MPT Red Brass Male Insert Adapter- Lead Free

2" x 160 Lbs Pressure Gauge, 2 lb Increments 2″ Face 1/4 MIP Brass Lower Connection Steel Case Shatterproof Face. May Be Used With Air Water Oil Gas Or Any Other Medium Not Corrosive To Brass.  

3/4" CTS Short Brass Compression Coupling- Lead Free 3/4″ COPPER TUBE SIZE, 1/2″ IRON PIPE SIZE, 3″ LENGTH, MAXIMUM PRESSURE: 125 PSI, MAXIMUM TEMPERATURE: 140 DEGREES FAHRENHEIT. ALL COMPRESSION COUPLING MUST BE RESTRAINED ON ENDS.

1-1/2" CTS x 1-1/2" (or 1-1/4")Tubular Flexible Drain and Trap Connector 1-1/2″ CTS x 1-1/2″ tubular or 1-1/2″ CTS x 1-1/4″ tubular. Connects 1-1/2″ copper to 1-1/2″ or 1-1/4″ plastic pipe. Rubber with 300...

1-1/2" x 12" PVC Single Flange Sink Tailpiece 1-1/2″ tubular x 12″ length. Made of white polypropylene plastic. Flanged on one end. Bagged.  

1-1/2" X 16" UNIVERSAL CENTER OUTLET WASTE- DIRECT CONNECT 1-1/2″ WHITE PLASTIC TUBULAR. CAN BE USED TO CONNECT DRAINS UP TO A 16″ SPAN (CENTER TO CENTER). FITS DIRECT CONNECT. INLCUDES NUTS AND WASHERS.  

1-1/4" MPT X 4" THREADED RED BRASS NIPPLE 1-1/4″ MALE PIPE THREADS, 4″ LENGTH, RED BRASS  

2" IPS PVC Compression (Dresser) Coupling 2″ IRON PIPE SIZE. 6″ LENGTH. MAXIMUM PRESSURE: 125 PSI. MUST BE RESTRAINED ON BOTH ENDS.  

4" PVC Heavy Duty Snap-in Cleanout w/ 3" IPS PVC Cleanout Plug

3/8" MPT x 12" Threaded Brass Nipple- Chrome Plated 3/8″ MALE PIPE THREADS, 12″ LENGTH, CHROME PLATED BRASS.  

3/8" MPT x 6" Threaded Brass Nipple- Chrome Plated 3/8″ MALE PIPE THREADS, 6″ LENGTH, CHROME PLATED BRASS.  

4" IPS PVC Compression (Dresser) Coupling 4″ IRON PIPE SIZE. 12″ LENGTH. MAXIMUM PRESSURE: 125 PSI. MUST BE RESTRAINED ON BOTH ENDS.  

Industrial Paint Pen- Black  

3" IPS PVC PVC Compression (Dresser) Coupling 3″ IRON PIPE SIZE. 8″ LENGTH. MAXIMUM PRESSURE: 125 PSI. MUST BE RESTRAINED ON BOTH ENDS.  

Approx 5 lb Brown Oakum (13 Strands cut in 27" Lengths) 13 strands per box (approx 5 lb bundle). Oiled oakum meets Federal spec. # HHP-117-2. Ingredients are burlap, oil and Bentonite. For use in sealing pipes, caulking windows, sealing driveways...

1/2" x 260" 4 Mil Yellow Teflon Tape for Gas Lines 4 MIL.  

100ft (approx. 5 Lbs) White Oakum, 5/16" Diameter Cord Cut 27" lengths 100 linear feet per bag. (approx 5 lb bundle) 27″ cut lengths. 5/16″ diameter. Meets Federal spec. #HHP-117-2. Made of Bentonite, jute roving and a trace of water. For...

2" IPS PVC Extension Cover Plug w/ 1/4" Brass Insert 1/4″ x 20tpi brass insert

3" PVC Closet Flange Less Knockout FITS INSIDE OF 3″ DWV PIPE. HAS TWO MOUNTING SLOTS TO ALLOW PRECISE ALIGNMENT OF WATER CLOSET. FITS FLUSH WITH FLOOR.  

3/4" FIP x 3/4" MIP x 30" L Uncoated Gas Connector (5/8" OD Hose) Made of uncoated 304 stainless steel 5/8″ OD (1/2″ ID) corrugated hose. Zinc plated fittings to prevent corrosion. CSA certifified. Quality machined fittings to ensure leak...

4" Cast Iron Cleanout w/ 3" Heavy Countersunk Brass Plug STANDARD BODY CLEANOUT (PLAIN END). FITS 4″ PIPE SIZE. 3″ COUNTERSUNK HEAVY PATTERN PLUG SIZE. FOR SERVICE WEIGHT OR NO-HUB.

REPLACEMENT SEAT FOR UNIVERSAL FAUCET (OEM# P692, R12)17/32" X 24 X 3/8" THREADS 17/32″ x 24 x 3/8″ Threads  

1" Insert x 1" MPT Red Brass Male Insert Adapter- Lead Free

1-1/2" x 8" Cast Trap Primer w/ Threaded Top- Chrome Plated Cast Body ( 1 pc Contruction); 17 Gauge Tailpiece; 5/8 O.D. Compression Outlet for Copper or Poly Tubing. Uses waste water to maintain level in seldom used traps  

1-1/2" x 8" PVC S/J Dishwasher Tailpiece w/ 3/4" Branch 1-1/2″ tubular. Made of white polypropylene plastic. Slip joint connection with 3/4″ (7/8″ OD) dishwasher connection. Includes 1pc wing nut, 1pc premium blue TP slip joint washer...

1/2" Barb x 1/2" Barb Brass Garden Hose Coupling

1/4" FPT Air Cock w/ Tee Handle and Hex Shoulder 1/4″ X 1/4″ FEMALE PIPE THREADS. DOUBLE FEMALE HEX SHOULDER. SOLID BRASS. FURNISHED WITH SPRING BOTTOM.  

3/4" PVC Ball Valve- Solvent Weld ONE PIECE CONSTRUCTION. EPDM SEATS. EPDM O-RINGS. SUITABLE FOR SWIMMING POOLS. 1/4 TURN OPERATION. RATED AT 150 PSI. SOLVENT ENDS COMPLY WITH ASTM D2466. NOT FOR USE WITH COMPRESSED AIR.  

4 1/4" OD Bell Cleanout Cover Plate- White Finish 4-1/4″ OUTSIDE DIMENSIONS. BELL DESIGN USED WHEN CLEANOUT FITTING IS NOT RECESSED INTO WALL. BELL IS 1-1/4″ DEEP. CLEANOUT FITTING. MANUFACTURED FROM HIGH IMPACT PLASTIC. SUPPLIED WITH #14...

5-1/4" OD Bell Cleanout Cover Plate- White Finish 5-1/4″ OUTSIDE DIMENSIONS. BELL DESIGN USED WHEN CLEANOUT FITTING IS NOT RECESSED INTO WALL. BELL IS 1-1/4″ DEEP. CLEANOUT FITTING. MANUFACTURED FROM HIGH IMPACT PLASTIC. SUPPLIED WITH #14...