Braxton Harris

1-1/2" x 12" PVC Single Flange Sink Tailpiece 1-1/2″ tubular x 12″ length. Made of white polypropylene plastic. Flanged on one end. Bagged.  

1-1/2" x 15" Brass Waste Arm (22 Ga)- Direct Connect- Chrome Plated 1-1/2″ TUBULAR X 15″ LENGTH. DIRECT CONNECT CONNECTION.  

1-1/4" Dielectric Union Washer

1-1/4" INSULATOR SLEEVE FOR DIELECTRIC UNION

1/2" IPS -14 tpi Flanged Basin Hexed Locknut

3-1/2" IPS Southern Code Raised Head Brass Cleanout Plug 3-1/2″ IPS S.C. RAISED HEAD BRASS CLEANOUT PLUG 3-1/2″ IRON PIPE SIZE. SOUTHERN CODE. RAISED SQUARE HEAD.  

3/4" FPT Galvanized Malleable Cap 150PSI. Suitable for use with schedule 40 pipe and pipe nipples.

3/8" Flare x 3/8" Flare Brass Gas Ball Valve 2 PIECE. CSA APPROVED, UL LISTED. ASME B16.33 C6A3.16, ANSI Z21.15. 3/8″ FLARE X 3/8″ FLARE THREADS. HEAVY FORGED BRASS CONSTRUCTION. 1/4″ TURN OPERATION. LEVER HANDLE. CHROME PLATED BRASS...

3/8" MIP x 1/4" FIP Brass Face Bushing 3/8″ MALE PIPE THREADS X 1/4″ FEMALE PIPE THREADS.  

3/8" x 6' Plain All Threaded Steel Rod 3/8" DIAMETER X 6' LENGTH. PLAIN FINISH.

10" IPS ASBESTOS FREE RING GASKET FITS 10″ IRON PIPE. ASBESTOS FREE RING GASKET MEETS ASTM F152, F36A, F146, 1/16″ THICK. 150 LBS. MAY BE USED FOR STEAM APPLICATIONS.  

3" PVC Closet Flange Less Knockout FITS INSIDE OF 3″ DWV PIPE. HAS TWO MOUNTING SLOTS TO ALLOW PRECISE ALIGNMENT OF WATER CLOSET. FITS FLUSH WITH FLOOR.  

3-1/2" Sewer Relief Valve DESIGNED FOR USE IN OUTSIDE CLEANOUTS TO ELIMINATE COSTLY DAMAGE DUE TO SEWAGE BACK-UP. FITS 3-1/2″ CAST IRON OR PLASTIC PIPES. PROVIDES A VISIBLE WARNING THAT SEWAGE IS BACKING UP. SPRING LOADED TO AUTOMATICALLY CLOSE,...

4" IPS PVC Compression (Dresser) Coupling 4″ IRON PIPE SIZE. 12″ LENGTH. MAXIMUM PRESSURE: 125 PSI. MUST BE RESTRAINED ON BOTH ENDS.  

Industrial Paint Pen- Black  

Sponge Closet Gasket (3-1/2"ID x 6-3/4" OD x 3/4" Thick) 3-1/2" ID X 6-3/4" OD X 3/4" THICK WITH 2 BOLT HOLES. FOR SETTING MOST FLOOR-MOUNTED TOILETS. REPLACES WAX RING.

(Approx 1lb) Brown Oakum, 3 Strands Cut in 27" Length 3 strands that are 27″ in length (approx 1lb bundle). Oiled oakum meets Federal spec. # HHP-117-2. Ingredients are burlap, oil and Bentonite. For use in sealing pipes, caulking windows, sealing...

1-1/4" Insert x 1-1/4" MPT Red Brass Male Insert Adapter- Lead Free

2-1/2" Dielectric Insulation Kit

5/16" x 6" Log Lighter Key (Cast Brass)

1" (CXC) Wrot Copper 90 Degree Elbow 1" Copper Sweat X 1" Copper Sweat "“ Wrot Copper "“ IAPMO Approved "“ NSF Approved

1-1/2" Slip Joint Baffle Tee (20 gauge)- Chrome Plated 20 gauge. Chrome plated. Slip joint connection.  

1-1/2" x 16" 20 Ga Brass End Outlet Waste S/J- Chrome Plated

1-1/4" Male Galvanized Insert Adapter

2-1/2" IPS PVC Expandable Repair Coupling 3″ IRON PIPE SIZE, 14-1/2″ LENGTH, MAXIMUM EXTENSION: 4-3/16″, HEAVY DUTY PVC CONSTRUCTION WITH DOUBLE O-RING BUNA-N-SEAL. RATED @ 150 PSI @ 72 DEGREES FAHRENHEIT. DESIGNED FOR SOLVENT WELD...

3" IPS PVC PVC Compression (Dresser) Coupling 3″ IRON PIPE SIZE. 8″ LENGTH. MAXIMUM PRESSURE: 125 PSI. MUST BE RESTRAINED ON BOTH ENDS.  

5-1/4" OD Bell Cleanout Cover Plate- White Finish 5-1/4″ OUTSIDE DIMENSIONS. BELL DESIGN USED WHEN CLEANOUT FITTING IS NOT RECESSED INTO WALL. BELL IS 1-1/4″ DEEP. CLEANOUT FITTING. MANUFACTURED FROM HIGH IMPACT PLASTIC. SUPPLIED WITH #14...

1-1/2" x 8" Cast Trap Primer w/ Threaded Top- Chrome Plated Cast Body ( 1 pc Contruction); 17 Gauge Tailpiece; 5/8 O.D. Compression Outlet for Copper or Poly Tubing. Uses waste water to maintain level in seldom used traps  

2" IPS PVC Extension Cover Plug w/ 1/4" Brass Insert 1/4″ x 20tpi brass insert

3/4" FIP x 3/4" MIP x 30" L Uncoated Gas Connector (5/8" OD Hose) Made of uncoated 304 stainless steel 5/8″ OD (1/2″ ID) corrugated hose. Zinc plated fittings to prevent corrosion. CSA certifified. Quality machined fittings to ensure leak...

4 1/4" OD Bell Cleanout Cover Plate- White Finish 4-1/4″ OUTSIDE DIMENSIONS. BELL DESIGN USED WHEN CLEANOUT FITTING IS NOT RECESSED INTO WALL. BELL IS 1-1/4″ DEEP. CLEANOUT FITTING. MANUFACTURED FROM HIGH IMPACT PLASTIC. SUPPLIED WITH #14...

4" Cast Iron Cleanout w/ 3" Heavy Countersunk Brass Plug STANDARD BODY CLEANOUT (PLAIN END). FITS 4″ PIPE SIZE. 3″ COUNTERSUNK HEAVY PATTERN PLUG SIZE. FOR SERVICE WEIGHT OR NO-HUB.

4"" PVC J-Hook For DWV Pipe 4" DWV "“ Incredibly fast pipe insulation "“ Super strong "I" beam design "“ Stem finger locks pipe into hanger "“ Each hanger comes complete and ready-to-use w/ two ring shank nails preloaded onto the stem "“ Scooped tip...

6" No Hub Cast Iron Backwater Valve Fits no hub or plastic pipe. 14-1/2″ length. Reduces backflow in drainage system. All neoprene gaskets. 300 series stainless bolts and washers. Repairable in service.  

REPLACEMENT SEAT FOR UNIVERSAL FAUCET (OEM# P692, R12)17/32" X 24 X 3/8" THREADS 17/32″ x 24 x 3/8″ Threads  

1" Insert x 1" MPT Red Brass Male Insert Adapter- Lead Free

1-1/2" x 16" PVC End Outlet Waste- D/C Direct Connect. 1-1/2″ WHITE PLASTIC TUBULAR. CAN BE USED TO CONNECT DRAINS UP TO A 16″ SPAN (CENTER TO CENTER). FITS DIRECT CONNECT CONNECTIONS. INLCUDES NUTS AND WASHERS.  

1-1/2" x 8" 22 Ga S/J Dishwasher Tailpiece w/ 3/4" Branch- Chrome Plated CHROME PLATED BRASS 1-1/2″ TUBULAR X 8″ LENGTH. SLIP JOINT CONNECTION. 3/4″ CTS (7/8″ OD) BRANCH.  

1-1/2" x 8" PVC S/J Dishwasher Tailpiece w/ 3/4" Branch 1-1/2″ tubular. Made of white polypropylene plastic. Slip joint connection with 3/4″ (7/8″ OD) dishwasher connection. Includes 1pc wing nut, 1pc premium blue TP slip joint washer...

1.5 gpm Dual Thread Faucet Aerator (6pcs/tube) - Lead Free