Sanitary Products

Sanitary Tri-Clamp Gaskets Sanitary fitting tri-clamp gaskets are available in a variety of sizes and materials.  Create a leak-proof seal between tri-clamp flanges. Tri-Clamp Gaskets are rated for use by both FDA and USP Class VI Sanitary Gaskets. ...

304 Sanitary Heavy Duty Clamp - Single Pin The single-pin heavy duty clamp with a wingnut is made from 304 stainless steel alloy. It is used to join two separate tri-clamp ends to one another. Sizes on this product range from 1/2 inch all the way up to...

Sanitary Long Welding Ferrule - Clamp End Long weld clamp ferrules allow extra room for welding capabilities when assembling process lines. Stainless steel design is offered in both 304 and 316L alloy options. Sizes for this product...

304 Heavy Duty Bolted Clamp - Fig No. SS13MHP This heavy-duty clamp is able to withstand higher pressure ratings than our standard single-pin heavy-duty clamp. Pressure ratings for this clamp vary depending on application processing temperatures and...

Sanitary Short Welding Ferrule - Clamp End Short weld clamp ferrules are fitted into process lines with both tri-clamp connection and butt welding. The butt welding end is shorter than our long weld version. Stainless steel design is offered in both...

Sanitary Solid End Cap The solid tri-clamp end cap is available in both 304 and 316L stainless steel alloys. This product is meant to cap an existing process line. Available in sizes ranging from 1/2 inch all the way to 12 inches. This product is...

Sanitary 90 Degree Tube Bend (Short Radius) Weld Ends The Polished 90° Elbow is available in both 304 & 316L stainless steel alloys.  Welds are required at both ends in order to accommodate a 90° change in angle between separate runs of...

Sanitary 90 Degree Clamp Elbow The 90° tri-clamp elbow is available in both 304 and 316L alloy, stainless steel. Clamp adapters such as the single pin heavy duty clamp with wing nut or bolted clamp should be...

Sanitary Hexagonal Tube Hanger with PVC Sleeve Hex Hangers can be installed by welding the hanger to any flat metal surface. Note: PVC Sleeves are not recommended for hot applications. Available in 304 stainless steel alloy. Hexagonal Tube Hanger with...

Sanitary Clamp x Male NPT Adapter One of our most widely used stainless steel tube fittings, this product remains a consistent choice among both amateurs and professionals due to its reliability and secure hold.All Tri-Clamp x Male NPT Adapters are...

Sanitary 45 Degree Clamp Elbow The 45 degree tri-clamp elbow is available in both 304 and 316L alloy, stainless steel. Clamp adapters such as the single pin heavy duty clamp with wing nut or bolted clamp along with a rubber...

Sanitary 90 Degree Buttweld Elbow with Tangents Buttweld 90° elbows are available in both 304 and 316L stainless steel alloy. The product is manufactured in accordance to 3A Standards for sanitary-grade line process equipment in both the food and...

Sanitary Clamp Concentric Reducer - Clamp Ends Stainless steel concentric clamp reducers allow for the connection of tubing of various sizes. Available in 304 and 316 stainless steel alloys. Unlike the eccentric clamp reducer, this product may cause...

Wayland Industries provides the highest quality stainless steel sanitary fittings, valves, and tubing to distributors throughout North America. Our products are made from T304 and T316 stainless steel, are 3A sanitary standard, and meet the highest...

Sanitary Clamp x Female NPT Adapter Female NPT to tri-clamp adapters are available in both 304 & 316 stainless steel alloy. Multiple tube diameters are available including unique fittings to adapt different size tubing and hose connections...

Sanitary Concentric Reducer - Weld Ends The Polished Concentric Reducer is available in both 304 & 316L stainless steel alloys.  Buttweld ends to accommodate the joining of two separate tube lines of different sizes.  Stainless steel...

Wayland Industries provides the highest quality stainless steel sanitary fittings, valves, and tubing to distributors throughout North America. Our products are made from T304 and T316 stainless steel, are 3A sanitary standard, and meet the highest...

Sanitary Long Tee - Weld Ends Butt Weld Tees have a straight run with a right-angle branch. Connection to the line is permanently secured via weld. Available in 304 & 316L Stainless Steel Manufactured in accordance with 3A Standards for...

Wayland Industries provides the highest quality stainless steel sanitary fittings, valves, and tubing to distributors throughout North America. Our products are made from T304 and T316 stainless steel, are 3A sanitary standard, and meet the highest...

304 Stainless Steel Sanitary Heavy Duty Clamp Sanitary tubing and fittings are produced to 3-A Sanitary Standards Stainless steel sanitary tubing dimensions and materials conform to ASTM A269/A270 Independent lab verification that fittings meet...

Sanitary Buttweld Short Tee Sanitary Short Butt-Weld Tee is available in multiple tube OD sizes and both 304 and 316L stainless steel alloys. This product meets 3A sanitary standards for use in food, beverage and dairy line processing equipment and...

PTFE Sanitary Clamp Gasket -40°F to 450°F Sanitary tubing and fittings are produced to 3-A Sanitary Standards Stainless steel sanitary tubing dimensions and materials conform to ASTM A269/A270 Independent lab verification that fittings meet...

Sanitary 45 Degree Buttweld Short Elbow The Polished 45° Elbow is available in both 304 & 316L stainless steel alloys.  Welds are required at both ends in order to accommodate a 45° change in angle between separate runs of sanitary...

Wayland Industries provides the highest quality stainless steel sanitary fittings, valves, and tubing to distributors throughout North America. Our products are made from T304 and T316 stainless steel, are 3A sanitary standard, and meet the highest...

Sanitary Tank Welding Ferrule (Light Duty) Light Duty Tank Ferrule. Product is 3-A Certified for all Sanitary Standards of Sanitary Fittings. Available in both 304 and 316L stainless steel. Suitable for line process equipment for food, beverage and...

316 Sanitary Tygon Hose Adapter 14MPHT tygon hose adapter is made from type 316L stainless steel with a sanitary clamp end x butt weld connection. For use with applications within the bakery, beverage/brewery, dairy, cosmetic, food, nutraceutical and...

Wayland Industries provides the highest quality stainless steel sanitary fittings, valves, and tubing to distributors throughout North America. Our products are made from T304 and T316 stainless steel, are 3A sanitary standard, and meet the highest...

316 Sanitary Heavy Tank Ferrule Available in 316L stainless steel alloy and a variety of tube diameter sizes. This product is manufactured in accordance with 3A Specifications for standards required by food, beverage and dairy processing equipment. 3-A...

304 Sanitary Long Clamp Rubber Hose Adapter Long style Tri-Clamp hose adapter specifically engineered for breweries. Tri-Clamp style hose adapter is available in both 304 & 316L stainless steel alloy. This product allows for both ease in assembly and...

Sanitary Clamp Tee Available in both 304 and 316L stainless steel alloys. This product is manufactured in accordance with 3A Standards for use in sanitary line processing including food, beverage, and pharmaceutical industries. Sanitary Tri-Clamp...

Wayland Industries provides the highest quality stainless steel sanitary fittings, valves, and tubing to distributors throughout North America. Our products are made from T304 and T316 stainless steel, are 3A sanitary standard, and meet the highest...

Sanitary 45 Degree Tube Bend (Long Radius) Weld Ends Welds are required at both ends in order to accommodate a 45° change in angle between separate runs of sanitary tubing. Tangents allow additional room while welding in place.  Stainless steel...

Sanitary Clamp x Schedule 10 Pipe Weld Adapter Tri-Clamp to Schedule 10 pipe adapter is available in 316L stainless steel alloy. Ranging in sizes from 1 inch all the way to 6 inches. This product is typically in stock in various sizes and can be shipped...

Sanitary Butterfly Valve - Clamp Ends - Multi Positions Our Multi-Position Handle Butterfly Valve has a lockable handles to prevent tampering, as standard. Standard clamp ends make for easy assembly and disassembly when cleaning or working in tight...

EPDM Sanitary Clamp Gasket -55°F to 275°F Sanitary tubing and fittings are produced to 3-A Sanitary Standards Stainless steel sanitary tubing dimensions and materials conform to ASTM A269/A270 Independent lab verification that fittings meet...

304 Sanitary Bevel Seat Hex Nut Union Hexagonal Nuts for securing threaded bevel seat ferrules Union Hexagonal Bevel Seat Nut 304 Stainless Steel 400 PSI Maximum Tolerance Data Sheet PDF (Page 36)  

Sanitary Clamp x Schedule 40 Pipe Weld Adapter Tri-Clamp to Schedule 40 pipe adapter is available in 316L stainless steel alloy. Ranging in sizes from 1 inch all the way to 6 inches. This product is typically in stock in various sizes and can be shipped...

Wayland Industries provides the highest quality stainless steel sanitary fittings, valves, and tubing to distributors throughout North America. Our products are made from T304 and T316 stainless steel, are 3A sanitary standard, and meet the highest...

Sanitary Weld x Male NPT Adapter The Male National Pipe Thread (NPT) Tube Weld Adapter is available in 304 or 316L stainless steel alloys. Stainless steel material is resistant to corrosion and can withstand high temperatures. Available in 1/2" up to 4"...

Sanitary Roll-On Expanding Ferrule Tri-Clamp style connection used to fit over existing tube. Roll-on expanding ferrules are available in both 304 & 316L stainless steel alloy.  Product is NOT 3A certified.  Roll-on ferrules are typically...