Hangers & Seismic

CPVC Standoff No-Block 2 Hole Strap For mounting CPVC pipe to wood Flared edges help protect CPVC Galvanized steel Supplied with #10 hex head cap screws ...

Eye Socket Steel Galvanized Model 037 Steel Eye Socket - 3/8" 3/8" hole for lag screw and two additional 1/4" screw holes Size Range: 3/8" rod size Finish: Electro-Galvanized Structural attachment...

Model 020 Rod Swivel Attachment Used as a branch line restraint for structural attachment. Designed to be used with PHD Model 350 Beam Clamp

CPVC 90° Sidemount Two-Hole Strap 100 PER BOX 9 LBS Top or bottom beam installation Can be used as a restrainer from upward movement of the sprinkler head Galvanized steel, supplied with hex screws...

UL AND FM APPROVED 200 PER BOX 20 LBS For fire sprinkler and other commercial piping Knurled swivel nut (3/8")design permits vertical hanger adjustment after...

Model 360 Wide Throat Beam Clamp 3/8" rod size Malleable iron, includes lock nut Click here for Technical Data

CPVC One-Hole Wrap Around Strap 100 PER CASE Designed to support pipe running horizontally on the side of a beam. Install with hanger tabs upward only. Can also be...

Model 906 Side Beam Angle Bracket 3/8" UNC Low Carbon Steel with Electro-Galvanized Finish UL Listed Click here for Technical Data (PDF)

Purlin Clamp (Malleable Iron-Plain)(Cross Reference PHD Model 290)3/8"" rod sizeAlso available zinc platedStructural attachment to lower flange of metal beams or purlins with 45° flanges up to 2""...

20 pc inner box / 100 pc master boxThreaded Rod Fastener for ConcreteBottom mount - 3/8" thread x 1/4" shank x 1-1/2" longOne piece self-tapping for use in concreteFM, ICC ListedUse...

(25 pcs inner box / 125 pcs master box) 3/8" rod 1/4 x 1" shank length Self drilling and threading into wood No pre-drilling required. Made in the U.S.A...

CPVC 2 Hole Strap 3/4" Horizontal or vertical position Used at side or bottom of beam Galvanized steel, supplied with hex slotted screwsCross Reference: Tolco...

Sammy® GST 10 for Wood. 3/8" ROD 1/4 x 2" shank length No pre-drilling required. Install with Sammy #14 (Black) Nut Driver Made in the U.S.A. UL Listed.

Sammy® CST 2 for Concrete. Made with The Original Tapcon®. 1/2" ROD 5/16" x 1 1-1/2" shank length 1/4" pre-drilled pilot hole required. Install with Sammy #14 (Black) Nut Driver Made in the U.S.A...

Model 010 Sway Brace Pipe Attachment The pipe attachment component of a sway brace system used in conjunction with a structural attachment fitting and joined together with a...

White plastic rod button Injection molded plastic 3/8" inner diameter x 1/2" height x 1-51/64" Outer diameter Recommended for giving a finished appearance where threaded rod...

Designed to chase damaged 3/8" hanger rod threads Quickly chase the damaged thread after cutting rod with a saw or bolt cutter End of the handle is concave of the stud point for use as a ram rod to...

Model 031 Seismic Clamping Pipe Attachment Brace to Schedule 40 pipe, and can also brace to structural steel, and 12 gauge strut. Universal swivel design allows for attachment...

Top Beam Clamp 3/8" rod size Malleable iron with hardened steel cup point set screw & lock nut. Designed for attaching hanger rod to the top flange of a beam or bar joist,...

Sammy Sidewinder® SWDR 1 w/ retaining nut for Steel.Made with Teks® self-drilling fasteners3/8" ROD 1/4-20 x 1 TEKS 3 shank lengthNo pre-drilling required.Minimum Thickness: .036" -...

Affixed to the face of 2 x 4 members to protect utility pipes and to protect nails from penetrating into hidden live wires (NMC Cable ) which may be running through...

Designed to be used with all 3/8" square head set screws as used with all beam clamps, c-clamps and purlin clamps. Click here for Technical Data (PDF)

Model 508 Split Ring Hanger - Hinged For suspension of non-insulated stationary pipe lines Electro-Galvanized Malleable Iron Cl

Standard Clevis Hanger (Electro-Galvanized Finish) UL Listed, FM Approved For suspension of non-insulated stationary pipe lines Low carbon steel construction ...

Model 551 Riser Clamp (Galvanized) Function: Designed for supporting and stabilizing vertical pipe runs. Clamp is designed for standard iron pipe O.D. and must be considered...

1/4-20 diameter shank x 1-1/2" length with #5 nutSide Mount3/8" Threaded RodDriver No:PFM2201200Minimum Thickness:0.125"Maximum Thickness:0.210"Max Pipe Size: 4"UL Listed, FM...

1/4-20 diameter shank x 1-1/2" length with #5 nutBottom Mount3/8" Threaded RodDriver No:PFM2201200Minimum Thickness:0.125"Maximum Thickness:0.5"Max Pipe Size: 4"UL Listed, FM...

100 pc inner box / 500 pc master box Threaded Rod Fastener for Wood - Side Mount 3/8" rod x 1/4" shank x 1" length One Piece Construction Self drilling...

Hanger & surge restraint for horizontal CPVC piping when installed on the side of supporting structure. For mounting CPVC pipe to wood Flared edges help protect CPVC ...

Model 550 Riser Clamp Function: Designed for supporting and stabilizing vertical pipe runs. Clamp is designed for standard iron pipe O.D. and must be considered when sizing...

SXP 3.5 for 1/2" Rod Structural attachment for installation of branch/end of line restraint using 1/2" all thread (.405" OD) or end thread rod (.500" OD). Designed for use in...

Current Special: Buy 125 pcs: $0.99 each Buy 1000 pcs: $0.87 each Sammy Super Screw SWG-20 horizontal mount Self drilling and tapping into wood 3/8" rod x 2"...

Seismic Sway Brace Pipe Attachment(Large)1"Brace, 2-1/2"Pipe(PHD 015) Function: Designed for bracing pipe against sway and seismic disturbance. The pipe attachment component...

Nut driver for bottom mount and side mount threaded rod fasteners for wood. Fits all ARGCO and Sammy Screws. Click Here for TechData

Zinc Plated Wood Drive Screw (#16 x 2") For fastening light load attachments to wood beams. Installed by driving into wood with hammer. Equivalent to a nail, but has...