Pipe Hangers and Supports

Fig. 212 Standard Steel Pipe Clamp Empire Figure 212 Standard Steel Pipe Clamp Submittal PDF Pipe Chart: Common Diameters & Wall Thicknesses PDF

Zinc Plated Hex Head Bolts  

Fig. 157 Extension Piece Empire Figure 157 Extension Piece Submittal PDF

Fig. 231OD Stainless Steel Two Hole Tube Strap for OD Sizes Designed as a light duty support for schedule 40/80 sized pipe. Attaches directly to horizontal or vertical structural member. For Tube OD Sizes T-304 Stainless Steel Empire Figure 231OD...

Fig. 62 Small Mouth Beam Clamp Designed to attach hanger rod to the top or bottom flange of a beam or bar joist where flange thickness does not exceed 5/8 of an inch. Empire Figure 62 - Small Mouth Beam Clamp Submittal (Sizes 3/8" -1/2") PDF Empire...

Fig. 310 "Emlok" Adjustable Swivel Ring Hanger Empire Figure 310 – “Emlok” Adjustable Swivel Ring Hanger Submittal PDF Empire Figure 310CT – Copper Tubing “Emlok” Adjustable Swivel Ring Hanger Submittal PDF Empire...

Fig. 51 Rod Coupling Empire’s Fig. 51 Rod Coupling is designed for connecting threaded rod of equal diameter and consistent thread properties. Empire Figure 51 Rod Coupling Submittal PDF

J-Hanger 1/2" through 4" NPS Electro-Galvanized Max Temperature: 450° F For the suspension of stationary pipe Max Load: 1/2" - 2-1/2" 150 lbs. Max Load: 3" 200 lbs. Max Load: 4" 250 lbs. Product Submittal / Data Sheet PDF Light Duty Commercial...

Fig. 75 Plain Steel Washer Plate Empire Figure 75 Steel Washer Plate Submittal PDF

Fig. 31 Band Hanger Empire’s Fig. 31 Band hanger is designed for the suspension of non-insulated stationary pipe lines. The plastic coated band hanger protects the pipe from the steel surface of the hanger and is designed toreduce noise, vibration...

Light Duty Adjustable Clevis Hanger 1/2" through 4" NPS Electro-Galvanized Max Temperature: 450° F For the suspension of stationary pipe Max Load: 1/2" - 2-1/2" 150 lbs. Max Load: 3" 200 lbs. Max Load: 4" 250 lbs. Product Submittal / Data...

Fig. 159 Adjustable Rod Beam Clamp Designed to be used in the suspension of a hanger rod from an Ibeam. Recommended for flange widths from 4 inches minimum to 8 inches maximum. Empire Figure 159 Adjustable Rod Beam Clamp Submittal PDF

Fig. 231 Two Hole Pipe Strap Note: Copper Straps fit Copper OD Tubing (See Tubing Data for Sizes) Empire Figure 231 – Two Hole Pipe Strap Submittal PDF Empire Figure 231CT – Two Hole Copper Tubing Strap Submittal PDF Copper Tubing Data...

Fig. 61 Wide Mouth Beam Clamp Empire’s Fig. 61 Wide Mouth Beam Clamp is designed to attach hanger rod to the top or bottom flange of a beam or bar. Empire Figure 61 - Wide Mouth Beam Clamp Submittal (Sizes 3/8" -1/2") PDF Empire Figure 61 –...

Fig. 56 Standard Hex Nut Empire Figure 56 Hex Nut Submittal PDF

Fig. 11 Adjustable Clevis Hanger Empire’s Fig. 11 Adjustable Clevis Hanger is designed for the suspension of non-insulated, stationary pipe lines.  For sizes 20” and larger a spacer sleeve is added over the cross bolt. Stainless steel...

Fig. 241G Non FHA Nail Plate Designed to protect piping and electrical lines that pass though wood framing from damage due to penetration from drywall or other fasteners. Attach with metal framing screws. Finish Electro-Galvanized Carbon Steel Empire...

Fig. 52 Round Steel Washer Empire’s Fig. 52 Round Steel Washer is designed to produce a greater bearing surface. Empire Figure 55 Round Steel Washer Submittal PDF

Fig. 137 Standard U-Bolt With 4 Hex Nuts Empire Figure 137 Standard U-Bolt Submittal PDF Pipe Chart: Common Diameters & Wall Thicknesses PDF

Fig. 41A Hanger Flange Plate Empire’s Fig. 41A Hanger Flange Plate is designed for attaching hanger rod to wood beams, ceilings, walls and floors. Stainless flange plates are reccommended for applications where protection from a corrosive...

Fig. 167 Pipe Covering Protection Shield Designed for outside of foam or fiberglass insulation on stationary pipe lines (not designed for pipe rollers) to prevent crushing of insulation without breaking the vapor barrier. Electro Galvanized Finish...

Fig. 66 Weld Beam Attachment Empire’s Fig. 66 Weld Beam Attachment is designed for the attachment of hanger rod to the bottom flange of steel beams where heavy loads and large hanger rod sizes are required. Empire Figure 66 Weld Beam Attachment...

Adjustable Clevis Hanger 1/2" through 6" NPS Electro-Galvanized Max Temperature: 450° F For the suspension of stationary pipe Max Load: 1/2" - 2-1/2" 150 lbs. Max Load: 3" 200 lbs. Max Load: 4" 250 lbs. Max Load: 6" 480 lbs. Product Submittal / Data...

Fig. 50 Standard Riser Clamp Empire’s Fig. 50 Standard Riser Clamp is designed for supporting and stabilizing vertical pipe runs. Plastic coated riser clamps are completely plastic coated with zinc plated hardware. The plastic coating prevents pipe...

Copper Ring Hanger 1/2" through 6" CTS Carbon Steel - Epoxy Coated Max Temperature: 450° F For the suspension of stationary Copper Tube Max Load: 1/2" - 2-1/2" 150 lbs. Max Load: 3" 200 lbs. Max Load: 4" 250 lbs. Max Load: 6" 480 lbs. Product...

3" Lockable HAP Pipe Hanger - Model PL-1111-V30  Fits: 3" PVC, Copper, Stainless, Black and Galvanized Pipe The innovative – hold and protect – hap system pipe hanger with locking system is designed to securely hold 3” PVC, copper,...

Fig. 95 Offset Pipe Clamp Plain Steel Finish Empire Figure 95 Offset Pipe Clamp Submittal PDF Pipe Chart: Common Diameters & Wall Thicknesses PDF

Fig. 10J J-Hanger Empire’s Fig. 10J J-Hanger is designed for the suspension of non-insulated, stationary pipe lines. Stainless steel hangers are recommended for applications where protection from a corrosive environment is required. Empire Figure...

Fig. 114 Turnbuckle Adjuster Plain Finish Empire Figure 114 Turnbuckle Adjuster Submittal PDF

1" HAP Pipe Hanger - Model PL-1111-1 Fits: 1" CPVC, PEX and Copper and 3/4" PVC Pipe  The innovative – hold and protect – hap system pipe hanger is designed to securely hold 1” CPVC, PEX, copper pipe and 3/4″ PVC pipe. This...

Fig. 243G FHA Nail Plate Designed to protect piping and electrical lines that pass though wood framing from damage due to penetration from drywall or other fasteners. Attach with metal framing screws. Domestically Manufactured Finish Electro-Galvanized...

1/4" Electro-Galvanized Beam Clamp Empire’s Fig. 60G 1/4″ Beam Clamp is designed to attach 1/4” hanger rod from metal beams, channel or angle iron. Empire Figure 60G 1/4" Electro-Galvanized Beam Clamp Submittal PDF

Fig. 41 Split Ring Extension Hanger Empire’s Fig. 41 Split Ring Hanger is designed for the horizontal or vertical suspension of non-insulated stationary copper tubing.  Split ring extention hangers with hinged design available in 3/8...

Fig. 233OD Stainless Steel One Hole Tube Strap Designed as a light duty support for schedule 40/80 sized pipe. Attaches directly to horizontal structural member. For Tube OD Sizes T-304 Stainless Steel Empire Figure 233OD – One Hole Pipe Strap...

Fig. 41H Hinged Split Ring Hanger Empire’s 41HT Hinged Split Ring Extension Hanger is designed for the horizontal or vertical suspension of non-insulated stationary pipe lines. Empire Figure 41H Split Ring Ext Hanger Submittal PDF Empire Figure...

Two-Hole Pipe Strap 1/4" through 4" Carbon Steel - Electro galvanized Max Temperature: 450° F For the suspension of stationary NPS Steel Pipe. See Chart below for Max Loads Product Submittal / Data Sheet PDF Light Duty Commercial Hangers...

Riser Clamp 1/2" through 6" NPS Carbon Steel - Electro Galvanized Max Temperature: 120° F For the suspension of stationary pipe Max Load: 1/2" - 2-1/2" 150 lbs. Max Load: 3" 200 lbs. Max Load: 4" 250 lbs. Product Submittal / Data Sheet PDF...

Fig. 233 One Hole Pipe Strap Pipe Size Electro-Galvanized Finish Empire Figure 233 – One Hole Pipe Strap Submittal PDF Pipe Chart: Common Diameters & Wall Thicknesses PDF

6" Lockable HAP Pipe Hanger - Model PL-1111-V60 Fits: 6" PVC, Copper, Stainless, Black and Galvanized Pipe The innovative – hold and protect – hap system pipe hanger with locking system is designed to securely hold 6” PVC, copper,...

Fig. 218 Malleable Iron Center Load Beam Clamp Designed for the suspension of a hanger rod from the center of an I-beam. The clamp accommodates flange widths of 2-3/8” - 7”. Flange thickness not to exceed .60 inches. Normally used in...