Braxton Harris

2" MPT X 3/4" FPT Bronze Hex Bushing- Lead Free 2″ male pipe threads x 3/4″ female pipe threads. Cast bronze. Max working pressure= 125 PSI steam pressure (W.S.P). 200PSI nonshock cold water, oil or gas (W.O.G.) Materials meet ASTM B 584-93B...

Inside Pipe Cutter w/ 3" Shaft Cuts plastic pipe 2″ and larger. Fits into any electric drill. Cut-off wheel is non-ferrous.Maximum RPM: 45,000. Cuts a variety of metals.  

Telescoping Match Holder  

1-1/2" Gerber Style Bath Drain w/ Strainer- Chrome Plated 1-1/2″ COARSE THREAD. FINISHED STRAINER AND SCREW.  

100ft (approx. 5 Lbs) White Oakum, 5/16" Diameter Cord Cut 27" lengths 100 linear feet per bag. (approx 5 lb bundle) 27″ cut lengths. 5/16″ diameter. Meets Federal spec. #HHP-117-2. Made of Bentonite, jute roving and a trace of water. For...

4" Cast Iron Kentucky Inside Caulk Drain 4″ CAST IRON KENTUCKY INSIDE CAULK DRAIN / HEAVY DUTY CAST IRON STRAINER AND BODY. LOOSE SET STRAINER. REPLACEMENT STRAINER IS OUR #KDS4.  

Blade for # L50 Cutter MADE OF DURABLE MOLYBDENUM VANADIUM STAINLESS STEEL.  

1-1/8" White Rubber Basin/Tub Stopper Hollow to increase flexibility.  

3/4" Thick Sponge Closet Gasket (3-1/2" I.D. x 5-3/8" O.D.) For Setting Most Floor-Mounted Toilets. Replaces Wax Ring  

Heavy Duty Force Cup Plunger w/ Wood Handle

WATER HEATER ELEMENT GASKET FOR S-MODEL SCREW-IN ELEMENT

1-1/2" Plastic Baffle Tee- Direct Connect 1-1/2″ X 1-1/2″ WHITE PLASTIC. DIRECT CONNECT CONNECTION. INCLUDES NUTS & WASHERS.  

1/4" x 8' Graphite Coated Stem Packing 1/4 lb. 1/4″ thick. 8 feet long in resealable spool. 1/4 lb. Non-asbestos graphite coated. Max temp of 150 degrees Fahrenheit. Widely used for repairs to radiator valves, water pumps, faucet stems, etc. ...

2" PVC Snap-in Cleanout w/ Plug 2″ PIPE SIZE X 1-1/2″ IPS (1-7/8″ OD) INTERNAL PIPE CLEANOUT. SOLVENT WELDS OR SIMPLY IS INSERTED INSIDE 2″ SCHEDULE 40 DWV PIPE. ALLOWS PIPE TO BE CUT FLUSH WITH FLOOR OR WALL. COUNTERSUNK PLUG...

4-1/2" Lead Fit-All Plug Fits 4-1/2″ pipe. Cast iron core.

4" X 3" Standard Cast Iron Closet Flange Fits 4″ Pipe and 3″ Depth. Caulk Connection. Notched and Slotted.  

1" Insert x 3/4" MPT Red Brass Male Insert Adapter- Lead Free

1/2" x 260" 4 Mil Yellow Teflon Tape for Gas Lines 4 MIL.  

2" x 160 Lbs Pressure Gauge, 2 lb Increments 2″ Face 1/4 MIP Brass Lower Connection Steel Case Shatterproof Face. May Be Used With Air Water Oil Gas Or Any Other Medium Not Corrosive To Brass.  

3" Cast Iron Kentucky Inside Caulk Drain Heavy duty cast iron strainer and body. Loose set strainer. Replacement strainer is our #KDS3.  

3/4" CTS Short Brass Compression Coupling- Lead Free 3/4″ COPPER TUBE SIZE, 1/2″ IRON PIPE SIZE, 3″ LENGTH, MAXIMUM PRESSURE: 125 PSI, MAXIMUM TEMPERATURE: 140 DEGREES FAHRENHEIT. ALL COMPRESSION COUPLING MUST BE RESTRAINED ON ENDS.

3/4" MPT x 1/2" Barb Nylon Adapter

1" Poly Insert Tee Made of Polypropylene. Meets ASTM D2609. Insert fittings join to PE (Polyethylene) pipe with stainless steel clamps.. Cold water use only.

1-1/2" x 12" PVC Single Flange Sink Tailpiece 1-1/2″ tubular x 12″ length. Made of white polypropylene plastic. Flanged on one end. Bagged.  

1-1/2" x 15" Brass Waste Arm (22 Ga)- Direct Connect- Chrome Plated 1-1/2″ TUBULAR X 15″ LENGTH. DIRECT CONNECT CONNECTION.  

1-1/2" X 16" UNIVERSAL CENTER OUTLET WASTE- DIRECT CONNECT 1-1/2″ WHITE PLASTIC TUBULAR. CAN BE USED TO CONNECT DRAINS UP TO A 16″ SPAN (CENTER TO CENTER). FITS DIRECT CONNECT. INLCUDES NUTS AND WASHERS.  

1-1/4" Dielectric Union Washer

1-1/4" INSULATOR SLEEVE FOR DIELECTRIC UNION

1/2" IPS -14 tpi Flanged Basin Hexed Locknut

3/4" FPT Galvanized Malleable Cap 150PSI. Suitable for use with schedule 40 pipe and pipe nipples.

3/8" x 6' Plain All Threaded Steel Rod 3/8" DIAMETER X 6' LENGTH. PLAIN FINISH.

4" PVC Heavy Duty Snap-in Cleanout w/ 3" IPS PVC Cleanout Plug

1/4" x 6" Log Lighter Key (Cast Brass)

3" PVC Closet Flange Less Knockout FITS INSIDE OF 3″ DWV PIPE. HAS TWO MOUNTING SLOTS TO ALLOW PRECISE ALIGNMENT OF WATER CLOSET. FITS FLUSH WITH FLOOR.  

4" IPS PVC Compression (Dresser) Coupling 4″ IRON PIPE SIZE. 12″ LENGTH. MAXIMUM PRESSURE: 125 PSI. MUST BE RESTRAINED ON BOTH ENDS.  

Industrial Paint Pen- Black  

Sponge Closet Gasket (3-1/2"ID x 6-3/4" OD x 3/4" Thick) 3-1/2" ID X 6-3/4" OD X 3/4" THICK WITH 2 BOLT HOLES. FOR SETTING MOST FLOOR-MOUNTED TOILETS. REPLACES WAX RING.

2-1/2" Dielectric Insulation Kit

1" (CXC) Wrot Copper 90 Degree Elbow 1" Copper Sweat X 1" Copper Sweat "“ Wrot Copper "“ IAPMO Approved "“ NSF Approved

1-1/2" Slip Joint Baffle Tee (20 gauge)- Chrome Plated 20 gauge. Chrome plated. Slip joint connection.