Braxton Harris

3" Galvanized Mechanical Test Plugs Galvanized Steel Flanges with Molded Rubber Gaskets. Fits both cast iron and PVC pipe. Fits minimum pipe ID 2.86″ and maximum pipe ID 3.25″. Maximum back pressure...

3/4" FPT Galvanized Malleable Banded Coupling 150PSI. Suitable for use with schedule 40 pipe and pipe nipples.

3/8" FIP x 1/2" MIP x 72" L Poly Coated Gas Connector (3/8" OD Hose) Made of yellow poly coated 304 stainless steel 3/8" OD (1/4" ID) corrugated hose. Zinc plated fittings to prevent corrosion. CSA...

3/8" X 3/8" X 1/4" OD Brass Compression Tee 3/8" X 3/8" X 1/4" OUTSIDE DIAMETER. TEMPERATURE RANGES FROM -65 TO 250 DEGREES FAHRENHEIT. USED WITH COPPER, BRASS & ALUMINUM TUBING, LOW AND MEDIUM AIR,...

30" x 30" Galvanized Water Heater Pan Drilled w/ Fitting 24 Gauge GALVANIZED. 4" DEEP. 30" X 30". 1" ADAPTER HOOK UP.

5/8"OD x 1/2"ID x 100' Polyethylene Tubing 100 FEET OF 100% VIRGIN POLYETHELENE. LOW DENSITY. NON-TOXIC. 5/8" OD, 1/2" ID, 1/16" WALL THICKNESS, 70 PSI WORKING PRESSURE AT 70 DEGREES FERENHEIT

Air Switch Kit Square for Disposer/ Jetted Tubs - PVD Polished Nickel Air Switch Kit that includes base unit (ASBU) and square button (ASBS). Uses air pressure as an On/off switch to operate waste...

Pipe Lube - 1 Quart For the lubrication of slip on or "O" Ring type joints with rubber or synthetic rubber type gaksets. NSF certified.

Side Mount Tank Lever - Toto (THU004) - PVD Stainless Steel 10? Brass Arm, plastic spud and nut. Fits Toto, Eljer. Fits Toto’s Carlyle, Carolina, Supreme, Ultimate, Ultramax. Fits: ST701 Replaces...

1" CTS 2-Hole Pipe Clamp 1" Copper Tube Size. Fits copper, CPVC, and polybutylene.

1-1/4" ID Plastic Handle Fitting Brush 1-3/8" O.D. Carbon steel.

1/2" ID (5/8" OD) Wire Handle Fitting Brush 1/2" inside diameter (5/8" OD) carbon steel wire bristles. For cleaning the inside of sweat fittings.

1/2" x 13 TPI Drop-in Anchor

2" CTS 2-Hole Pipe Clamp 2" Copper Tube Size. Fits copper, CPVC, and polybutylene.

2" CTS Copper Plated Split Ring for Copper Tubing Fits 2" Copper tube size. Rod size: 3/8".

3/8" x 16 TPI Drop-in Anchor

5"-9" OD Corrugated Roof Flashing Fits pipes 5″ (127mm) to 9″ (228mm) OD. Base diameter 10-1/2″ (266mm). Height 6″. Made of virgin gray EPDM rubber with continuous service range of -65 degrees F to...

Braxton Harris FSS Black Flat Soapstone – 144 Piece Carton Braxton Harris FSS Black Flat Soapstone provides a convenient marking solution for welding, fabrication, metalworking, and general shop...

Test Plug for 1-Hole Faceplate-1/4" Threads FITS 1-HOLE OVERFLOW FACEPLATE WITH 1/4" THREADS.

Test Plug- 3/8"-16 Threads for Bath Waste FITS OUR #TTD & #LTD112. FITS OTHER TUB DRAINS WITH 3/8" THREADS.