Painted

Standard Rigid Couplings Ductile Iron construction. Non-lead orange paint Standard Gasket: Pre-Lubricated Grade E EPDM (Type A) Conforms to ASTM A536 UL listed, FM Approved  Standard Rigid Coupling Data Sheet PDF Grooved Catalog PDF Note: TCFP...

Grooved Standard "C" Gaskets Compound: EPDM Temp Range: -30F to + 230F Compound: Nitrile Tem Rang: -20F to + 180F General Service Applications Water, dilute acids, alkalies, salts, and many chemical services not involving hydrocarbons, oils, or gases...

Standard Flexbile Couplings Ductile Iron construction. Non-lead orange paint Conforms to ASTM A536 UL listed, FM Approved Flexible Coupling Data Sheet PDF Grooved Catalog PDF Designed for service up to 300psi/20bar depending on sizes; it forms a...

Mechanical Tees Threaded Ductile Iron construction Non-lead orange paint Conforms to ASTM A536 UL listed, FM Approved Mechanical Tee Data Sheet PDF Grooved Catalog PDF  

Grooved Resilient Butterfly Valve Lever Operated Working Pressure : 300 PSI Max. Test Pressure : 450 PSI Max. Working Temp : 250°F Body : Ductile Iron with Epoxy coating Disc : Ductile Iron EPDM Stem : Stainless steel Throttling Plate : Zinc plated...

Grooved 90° Degree Elbows Standard Radius Ductile Iron construction. Non-lead orange paint Conforms to ASTM A536 UL listed, FM Approved 90° Degree Elbow Radius Data Sheet PDF Grooved Catalog PDF

Grooved 90° Degree Elbows Short Radius Ductile Iron construction. Non-lead orange paint Conforms to ASTM A536 UL listed, FM Approved 90° Degree Short Radius Elbow Data Sheet PDF Grooved Catalog PDF

Grooved Flanged Adapter Can handle much more pressure than a standard flanged adapter Easier to install properly for even the most inexperienced worker Compare the beefier flanged nipple adapter to your current product Ductile Iron construction.Non-lead...

Model 7705 Flexible Coupling The Shurjoint Model 7705 is a standard flexible coupling designed for use in a variety of moderate pressure general piping applications. The Model 7705 coupling features flexibility that can accommodate misalignment,...

Grooved End Cap Ductile Iron construction. Non-lead orange paint Conforms to ASTM A536 UL listed, FM Approved  End Cap Data Sheet PDF Grooved Catalog PDF

Standard Grooved Rigid Coupling - EPDM Gasket Maximum working pressure depending on coupling size and schedule of pipe:     1" to 6" - 1000 psi (68.9 bar)      8" - 800 psi (55.1 bar)      10" & 12" - 600 psi...

Grooved Concentric Reducer Ductile Iron construction. Non-lead orange paint Conforms to ASTM A536 UL listed, FM Approved Concentric Data Sheet  Grooved Catalog PDF  

Grooved Standard "T" Gaskets - Nitrile Good for petroleum oils, mineral oils, vegetable oils, non-aromatic hydrocarbons, many acids and water ≤+150°F (+65°C) Max Temp. Range: -20°F (-29°C) to +180°F (+82°C) Gaskets fit...

Grooved 45° Degree Elbows Ductile Iron construction. Non-lead orange paint Conforms to ASTM A536 UL listed, FM Approved 45° Degree Elbow Data Sheet PDF Grooved Catalog PDF

U-Bolt Mechanical Tee Ductile Iron construction. Non-lead orange paint Conforms to ASTM A536 UL listed, FM Approved U-Bolt Mechanical Tee Data Sheet PDF Grooved Catalog PDF  

Grooved Reducing Couplings Ductile Iron construction. Non-lead orange paint Conforms to ASTM A536 UL listed, FM Approved Reducing Coupling Data Sheet PDF Grooved Catalog PDF

Grooved Standard "C" Gaskets - EPDM Gaskets fit Shurjoint Coupling Model Numbers: Z07, 7705 & 7707 Shurjoint Grade "E" EPDM is compounded per ASTM D2000 designation 2CA615A25B24F17Z. Peroxide curing and post curing give a higher crosslink density,...

Mechanical Tees Threaded Small Ductile Iron construction Non-lead orange paint Conforms to ASTM A536 UL listed, FM Approved The Model 502 Small Mechanical Tee is the ideal outlet fitting for direct connections to sprinkler heads, drop nipples and or...

M07 Quick Install Coupling With our M07 Rigid Coupling, Shurjoint is entering into the ready-to-install Coupling arena, and we have made improvements upon those already there. The M07 also ensures uniform gasket support/stability with our patent-pending...

Grooved Standard "C" Gaskets Compound: EPDM Color Code: Green Stripe Temp Range: -30F to + 230F Compound: Nitrile Color Code: Orange Stripe Tem Rang: -20F to + 180F General Service Applications Water, dilute acids, alkalies, salts, and many chemical...

Grooved Flange Hinge Adapter Ductile Iron construction. Non-lead orange paint Conforms to ASTM A536 UL listed, FM Approved Flange Adapter Data Sheet PDF Grooved Catalog PDF 

Standard Grooved Flexible Coupling - EPDM Gasket Maximum working pressure depending on coupling size and schedule of pipe:     1" to 6" - 1000 psi (68.9 bar)      8" to 12" - 800 psi (55.1 bar)      14" to 20" -...

Model Z07 Heavy Duty Rigid Coupling The Shurjoint Model Z07 is an angle-pad design rigid coupling for general piping applications where rigidity is required including, mechanical rooms, valve connections fire mains and long straight runs. The angle-pad...

90° Grooved Elbow - Regular Radius Shurjoint grooved-end elbows are made of ductile iron per ASTM A536 Gr. 65-45-12 and or ASTM A395 Gr. 65-45-15. C-E dimensions are manufacturer’s standard. Shurjoint standard fitting pressure ratings conform...

7150M Grooved-End Reducing Nipple The Shurjoint Models 7150F & 7150M are designed for making direct reduction from a grooved system to female or male threaded system without the need for expensive swaged nipples. Shurjoint ductile iron grooved-end...

7707 Heavy Duty Flexible Coupling The Model 7707 Flexible Coupling is designed for use in a variety of general piping applications ofmoderate or high pressure services. Working pressure is usually dictated by the wall thickness and rating of the pipe...

Grooved Short Radius Tees Ductile Iron construction. Non-lead orange paint Conforms to ASTM A536 UL listed, FM Approved  Short Radius Tee Data Sheet PDF Grooved Catalog PDF Suitable for fire protection services, water supply systems and other...

Grooved Standard Radius Tee Ductile Iron construction. Non-lead orange paint Conforms to ASTM A536 UL listed, FM Approved Standard Radius Tee Data Sheet PDF Grooved Catalog PDF Suitable for fire protection services, water supply systems and other...

7150F Grooved Reducing Socket Adapter The Shurjoint Models 7150F & 7150M are designed for making direct reduction from a grooved system to female or male threaded system without the need for expensive swaged nipples. Shurjoint ductile iron...

55 Grooved Nipple Adapter Great item for tranistioning from pipe thread to grooved. Shurjoint ductile iron grooved-end fittings are made of ductile iron per ASTM A536 Gr.65-45-12 and or ASTM A395 Gr. 65-45- 15. C-E dimensions are manufacturer’s...

Grooved Drain Caps with 1" NPT Tap Ductile Iron construction Non-lead orange paint Conforms to ASTM A536 UL listed, FM Approved Drain Cap Data Sheet PDF Grooved Catalog PDF  

Grooved Reducing Tees Suitable for fire protection services, water supply systems and other process systems of higher work pressure. Ductile Iron construction. Non-lead orange paint Conforms to ASTM A536 UL listed, FM Approved  Reducing Tee Data...

Grooved 22.5° Degree Elbow Ductile Iron construction. Non-lead orange paint Conforms to ASTM A536 UL listed, FM Approved 22.5° Degree Elbow Data Sheet PDF Grooved Catalog PDF

7160 Grooved End Cap Shurjoint grooved-end fittings are made of ductile iron per ASTM A536 Gr. 65-45-12 and or ASTM A395 Gr. 65-45-15. C-E dimensions are manufacturer’s standard. 7160 Cap Submittal Sheet PDF Shurjoint Technical Data PDF Shurjoint...

7043 Flange Adapter - ANSI Class 300 The Model 7043 flange adapter allows for a direct connection with ANSI Class 300 flanges. The specially designed gasket enables the transition from a grooved system to a flanged system or component with this single...

7150 Grooved Concentric Reducer Shurjoint grooved-end reducers are made of ductile iron per ASTM A536 Gr. 65-45-12 and or ASTM A395 Gr. 65-45-15. C-E dimensions are manufacturer’s standard. For sizes larger than 14” (350 mm) are fabricated...

7721 Mechanical Tee Female Threaded Outlet The Model 7721 Mechanical Tee when mounted on hole cut pipe provides a fast and easy mid-pipe threaded branch outlet. By utilizing the Model 7721 you eliminate the need for welding or the use of multiple...

Grooved Cap Ductile Iron - Full Flow Downloads Grooved Catalog PDF Grooved Cross Reference PDF

7706 Heavy Reducing Coupling The Model 7706 Reducing Coupling allows direct reduction on a piping run and eliminates the need for a concentric reducer and couplings. The specially designed rubber gasket prevents the smaller pipe from telescoping into the...

7120 Grooved Tee Shurjoint grooved-end fittings are made of ductile iron per ASTM A536 Gr. 65-45-12 and or ASTM A395 Gr. 65-45-15. C-E dimensions are manufacturer’s standard. Shurjoint standard fitting pressure ratings conform to the ratings of...