Braxton Harris

3" Flapper for Eljer Titan (#495-6077-00)- Blister Packed Individually blister packaged. Replaces #495-6077-00. Fits Titan Models: Titan 17″ (091-0770, 091-0772, 091-0773, 091-0773, 091-0776, 091-0777, 091-2778 , 091-0782) and Titan 15″...

3" x 2" Cast Iron Quick Set Closet Flange 3″ pipe size x 2″ depth.. Includes four corrosion resistant bolts for even clamping. The neoprene gasket meets ASTM C564.Cuts installation time by 80%. Ideal for repair or new construction.  

3/4" Poly Insert Tee Made of Polypropylene. Meets ASTM D2609. Insert fittings join to PE (Polyethylene) pipe with stainless steel clamps.. Cold water use only.

4" All PVC Snap-in Drain Fits 4″ Schedule 40 DWV pipe. Comes with stainless steel strainer. May be solvent welded or just inserted inside of pipe. Allows for cutting drain pipe flush with the floor. May be used as a strainer for vent stack or air...

4" No-Hub Coupling No-hub couplings are used to join no-hub cast iron soil pipe and fittings. Made in accordance with Cast Iron Soil Pipe Institute Standard (CISPI) #310. Couplings are shipped as assemble units. Stainless steel corrugated shield and...

4" x 2" Cast Iron Push-in Closet Flange w/ Gasket Fits inside 4″ cast iron or schedule 40 DWV pipe. 2″ barrel length  

4" x 2-1/2" Standard Cast Iron Closet Flange Fits 4″ Pipe and 2-1/2″ Depth. Caulk Connection. Notched and Slotted.  

5/8" Barb x 1/2" MPT Brass Hose Barb Adapter 5/8" BARB (HOSE ID) X 1/2" MALE PIPE THREADS

Brass Well for Weksler Multi-angle Thermometer Standard well 2-1/2″ length 3/4″ NPT  

Galvanized Water Heater Stand 18 Gauge(21"Lx21"x18"H) For use w/ most residential gas water heaters up to 50 gallons, including Mor-Flo. Extremely strong stand w/ snap in legs. Legs are secured w/ a set screw. Kit Includes: 1 Base & 4 Legs. Stand...

Small Air Admittance Valve (Ayrlett) (20 DFU 1-1/2" or 2" Pipe) Fits 1-1/2″ and 2″ Pipe sizes. Vents up to 160 DFU on a branch and up to 20 DFU on a stack. Can be used as an individual, branch, circuit or stack vent.  

#12 All Stainless Steel Gear Clamp (1/2" to 1-1/4") Clamp diameter: 1/2" to 1-1/4", 1/2" wide stainless steel band, slotted hex head stainless steel screw.

#88 All Stainless Steel Gear Clamp (4" to 6") Clamp diameter: 4" to 6". 1/2" wide stainless steel band, slotted hex head stainless steel screw.

1" CTS Copper Clad Pipe Hanger Bell Style COPPER CLAD

1" OD Round Curtain Rod Flanges (pair)- Chrome Plated Round chrome plated steel with exposed screws. Fits 15/16" rod. Includes 2 chrome plated steel flanges and 4 wood screws.

1" Poly Insert Coupling Made of Polypropylene. Meets ASTM D2609. Insert fittings join to PE (Polyethylene) pipe with stainless steel clamps.. Cold water use only.

1" X 3/4" (CXC) Wrot Copper 90 Degree Elbow 1" Copper Sweat X 3/4" Copper Sweat "“ Wrot Copper "“ IAPMO Approved "“ NSF Approved

1-1/2" IPS C.P. Flexible Floor and Ceiling Plate 1-1/2" iron pipe size. Non-corrosive. 100% rust proof. One piece split chrome plated Polypropylene. 3.82" OD.

1-1/2" x 12" PVC Extension Tube- S/J One End 1-1/2″ tubular x 12″ length. Made of white polypropylene plastic. Slip joint one end. Includes: 1pc wing nut, 1pc premium blue TP slip joint washer.  

1-1/8" OD (1"cts) C.P. Flexible Floor and Ceiling Plate 1" copper tube size. Non-corrosive. 100% rust proof. One piece split chrome plated Polypropylene. 3.077" OD.

1/2" CTS Sweat Brass Full Port Ball Valve- Lead Free 1/2″ X 1/2″ COPPER TUBE SIZE. 400 PSI WATER, OIL, GAS. 150 PSI WORKING STEAM PRESSURE. HARD CHROME PLATED BRASS BALL. QUARTER TURN OPERATION. DACROMET PLATED STEEL HANDLES WITH VINYL GRIP...

1/2" Flare Brass Union 1/2" FLARE THREADS. Used with copper, brass, aluminum, welded steel tubing. Used on lines handling hard to hold liquids and gases, including gasoline, grease oil, water, vacuum lines, air lines, LP and natural gasolines,...

1/2" Flare x 1/2" Flare Heavy Pattern Gas Appliance Ball Valve

1/4" Flare x 1/4" MPT Brass Elbow Style 49. 1/4" flare threads x 1/4" male pipe threads. Used with copper, brass, aluminum, welded steel tubing. Used on lines handling hard to hold liquids and gases, including gasoline, grease oil, water, vacuum lines,...

1/4" MPT Air Cock Tee Handle w/ Hex Shoulder 1/4" X 1/4" MALE PIPE THREADS. DOUBLE MALE HEX SHOULDER. SOLID BRASS. FURNISHED WITH SPRING BOTTOM.

1/4" X 1/4" Brass Hose Barb Splicer 1/4" BARB (HOSE ID) X 1/4" BARB (HOSE ID)

2" x 15 Lbs Pressure Gauge, 1/5 lb Increments 2″ Face 1/4 MIP Brass Lower Connection Steel Case Shatterproof Face. May Be Used With Air Water Oil Gas Or Any Other Medium Not Corrosive To Brass.  

2-1/2" Face 1/2"mpt Dial Type Thermometer 2-1/2″ diameter face w/ 5 degree increments. 40 to 240 degrees F 1/2″ mpt brass well. Removable thermometer.  

2-1/2" LEAD FIT-ALL PLUG FITS 2-1/2″ PIPE. CAST IRON CORE.

3' x 1-3/8" OD Brass Cover Tube- Chrome Plated 20 Gauge. Plain ends with no threads.  

3/4" Barb x 3/4" MHT Hose Barb ALL BRASS. 1/2" HOSE BARB X 3/4" MALE GARDEN HOSE THREAD

3/4" FHT Brass Hose End Cap Solid brass.

3/4" IPS PVC Expandable Repair Coupling 3/4″ IRON PIPE SIZE, 6-3/4″ LENGTH, MAXIMUM EXTENSION: 2-1/4″, HEAVY DUTY PVC CONSTRUCTION WITH DOUBLE O-RING BUNA-N-SEAL. RATED @ 150 PSI @ 72 DEGREES FAHRENHEIT. DESIGNED FOR SOLVENT WELD...

3/4" MHT x 1/2" FPT Brass Hose Nipple 3/4" MALE HOSE THREAD X 1/2" FEMALE PIPE THREAD BRASS GARDEN HOSE FITTING

3/4" MPT x 5/8" Barb Nylon Adapter

3/4" x 60' Black Vinyl Electrical Tape (UL listed) 3/4" width. 60 feet long. Black 7 mil black vinyl. UL listed. Lead Free.

3/8" Flare Brass Union 3/8" FLARE THREADS. Used with copper, brass, aluminum, welded steel tubing. Used on lines handling hard to hold liquids and gases, including gasoline, grease oil, water, vacuum lines, air lines, LP and natural gasolines,...

3/8" Flare x 1/2" MPT Brass Half Union 3/8" FLARE THREADS X 1/2" MALE PIPE THREAD. Used with copper, brass, aluminum, welded steel tubing. Used on lines handling hard to hold liquids and gases, including gasoline, grease oil, water, vacuum lines, air...

4" Diameter 16 Gauge Stainless Steel Extension Cover 4" outside diameter 16 gauge stainless steel with beveled edge. Made to be used on floors or walls. 1500 degree Fahrenheit fire rating.

4" Force Cup Plunger RED RUBBER / 9″ HANDLE