Braxton Harris

1/2" FPT Log Lighter Straight Valve w/ Quarter Turn 1/2″ x 1/2″ female pipe threads. Comes with valve, chrome plated escutcheon and 2-1/2″ x 1/4″ key. CSA approved. BTU rating: 120,000. If longer escutcheon is needed use...

1/2"x 520" 3+ mil Teflon Tape - 50pc Counter Display 1/2″ width, 520″ length. Permanently seals all threaded pipe joints and valves. Pop-out spool. Meets government military specifications #MIL-T27730A. Temperature range is -500 to +650...

1/4" to 2-1/2" OD Deluxe Tubing Cutter SPRING LOADED CUTTER WHEEL FEEDING SYSTEM ALLOWS SLIDE ACTION SIZE ADJUSTMENT AND QUICK RELEASE. GROOVED ROLLERS FOR CLOSE TO FLARE CUTS. FOLD AWAY REAMER. ALUMINUM ALLOY BODY AND ZAMACK KNOB.  

2" Galvanized Mechanical Test Plugs Galvanized Steel Flanges with Molded Rubber Gaskets. Fits both cast iron and PVC pipe. Fits minimum pipe ID 1.96″ and maximum pipe ID 2.25″. Maximum back pressure water head is 5 feet Maximum back pressure...

2" PVC Floor Drain and Trap w/ Cleanout Solvent weld 2″ DWV connection. 1-1/2″ concealed cleanout 1-1/2″ plug. Drain includes PVC strainer.  

2' mpt Backwater Device for Floor Drains w/ P-trap Brass Body Ball included. Sleeve type.  

2-1/2" x 300 Lbs Pressure Gauge, 5 lb Increments 2 -1/2″ Face 1/4 MIP Brass Lower Connection Steel Case Shatterproof Face. May Be Used With Air Water Oil Gas Or Any Other Medium Not Corrosive To Brass.  

3" All PVC Snap-in Drain Fits 3″ Schedule 40 DWV pipe. Comes with stainless steel strainer. May be solvent welded or just inserted inside of pipe. Allows for cutting drain pipe flush with the floor. May be used as a strainer for vent stack or air...

4" IPS PVC Countersunk Cleanout Plug

4-Way Key Wrench SIZES: 1/4″, 9/32″, 5/16″, & 11/32″ SQUARE STEMS. USED FOR VALVES, FAUCETS, SILLCOCKS, ETC.  

6" Diameter 16 Gauge Stainless Steel Extension Cover 6" outside diameter 16 gauge stainless steel with beveled edge. Made to be used on floors or walls. 1500 degree Fahrenheit fire rating.

6" Diameter 16 Gauge Stainless Steel Extension Cover w/ 1/4" x 4" Length Bolt 6″ outside diameter 16 gauge stainless steel with beveled edge. Made to be used on floors or walls. 1500 degree Fahrenheit fire rating. Chrome plated bolt is 1/4″...

6" Flexible Saddle Tee w/ S.S. Series 300 Clamps THESE FLEXIBLE SADDLES DEMONSTRATE SUPERIOR FLEXIBILITY IN MORE THAN ONE WAY. THE SADDLES ELASTOMERIC CONSTRUCTION ALLOWS A SINGLE SIZE TO SECURELY FIT 6″ THROUGH 12″ PIPE DIAMETERS. THE...

6" Length x 5/16" Log Lighter Key

8" Cast Iron Sewer Lid Only PART # SB8 IS FOR COMPLETE BOX.

8-1/2" Two Piece Tub Spout w/ Nose Diverter- Chrome Plated 1/2″ MIP CONNECTION AT WALL-END OF SPOUT  

Inverted Marking Paint Wand 34″ Length Wand with Snap-Out Removable Wheel. Perfect For Easy Stenciling Or Touchups On Striped Surfaces. Use with Krylon Upside-Down Marking Paint  

1 1/2" x 1-1/2" MIP Poly Male Insert Adapter Made of Polypropylene. Meets ASTM D2609. Insert fittings join to PE (Polyethylene) pipe with stainless steel clamps.. Cold water use only.

1" CTS X 1" CTS X 3/4" IPS Bronze Compression Tee- Lead Free 1″ Copper Tube size (3/4″ IPS) X 3/4″ Iron Pipe size threaded branch up to 125 PSI. All compression tees must be restrained on both ends.

1" x 1" MIP Poly Insert Male Adapter Made of Polypropylene. Meets ASTM D2609. Insert fittings join to PE (Polyethylene) pipe with stainless steel clamps.. Cold water use only.

1" x 6-1/2" Black Iron Nipple Meets ASTM A-53 Specs  

1-1/2" (C X C X C) Wrot Tee 1-1/2" Copper Sweat X 1-1/2" Copper Sweat X 1-1/2" Copper Sweat "“ Wrot Copper "“ IAPMO Approved "“ NSF Approved

1-1/2" CTS Long Brass Compression Coupling- Lead Free 1-1/2″ COPPER TUBE SIZE, 1-1/4″ IRON PIPE SIZE, 5″ LENGTH, MAXIMUM PRESSURE: 125 PSI, MAXIMUM TEMPERATURE: 140 DEGREES FAHRENHEIT. ALL COMPRESSION COUPLING MUST BE RESTRAINED ON ENDS.

1-1/2" IPS x 3" S.S. 1-Bolt Repair Clamp Fits 1-1/” iron pipe size/ schedule 40. 3″ length. Type 301 stainless steel shield. Plated malleable iron lugs (ASTM A47 Grade 32610). High content neoprene gasket with temperature range of -40 to 212...

1-1/2" Poly Insert Coupling Made of Polypropylene. Meets ASTM D2609. Insert fittings join to PE (Polyethylene) pipe with stainless steel clamps.. Cold water use only.

1-1/2" x 12" Black Iron Nipple Meets ASTM A-53 Specs  

1-1/4" (C X MPT) Wrot Male Adapter 1-1/4" Copper Sweat X 1-1/4" Male Pipe Threads "“ Wrot Copper "“ IAPMP Approved "“ NSF Approved

1-1/4" 45 Degree Slip Repair Elbow- Chrome Plated 1-1/4″ O.D. Tubular. Slip Joint on both ends, Includes Nuts & Washers.  

1-1/4" CTS Sweat Brass Full Port Ball Valve- Lead Free 1-1/4″ X 1-1/4″ COPPER TUBE SIZE. 400 PSI WATER, OIL, GAS. 150 PSI WORKING STEAM PRESSURE. HARD CHROME PLATED BRASS BALL. QUARTER TURN OPERATION. DACROMET PLATED STEEL HANDLES WITH VINYL...

1-1/4" FIP X 1-1/4" Copper SWT. Dielectric Union- Lead Free 1-1/4″ FIP X 1-1/4″ COPPER SWEAT CONNECTION. PREVENTS ELECTROLYSIS OR GALVANIC ACTION WHEN CONNECTING DISSIMILAR MATERIALS. FOR USE WITH WATER UP TO 200 DEGREES FaHRENHEIT. THREADS...

1-1/4" Poly Insert Coupling Made of Polypropylene. Meets ASTM D2609. Insert fittings join to PE (Polyethylene) pipe with stainless steel clamps.. Cold water use only.

1-1/4" x 1-1/4" MIP Poly Male Insert Adapter Made of Polypropylene. Meets ASTM D2609. Insert fittings join to PE (Polyethylene) pipe with stainless steel clamps.. Cold water use only.

1/2" FIP Self Closing Shower/ Urinal Valve 1/2″ FIP connection. Chrome plated heavy cast brass body and handle w/ pull chain. For use with outdoor showers as well as wall hung urinals.  

1/2" FIP x 1/2" MIP x 36" L Uncoated Gas Connector (1/2" OD Hose) Made of uncoated 304 stainless steel 1/2″ OD (3/8″ ID) corrugated hose. Zinc plated fittings to prevent corrosion. CSA certifified. Quality machined fittings to ensure leak...

1/2" FIP x 1/2" MIP x 36" L Uncoated Gas Connector (5/8" OD Hose) Made of uncoated 304 stainless steel 5/8″ OD (1/2″ ID) corrugated hose. Zinc plated fittings to prevent corrosion. CSA certifified. Quality machined fittings to ensure leak...

1/2" FPT 90 Degree Chrome Plated Brass Elbow- Lead Free 1/2″ FEMALE PIPE THREADS, CAST BRASS.  

1/2" FPT Sillcock, Cast Brass Body w/ Notched Flange 1/2″ FEMALE PIPE THREADS INLET. 3/4″ MALE HOSE THREAD OUTLET. CAST BRASS BODY WITH NOTCHED FLANGE FOR SCREWS. HEAVY CAST IRON HANDLE.  

1/2" MIP x 1/2" MIP x 18" L Poly Coated Gas Connector (1/2" OD Hose) Made of yellow coated poly 304 stainless steel 1/2" OD (3/8" ID) corrugated hose. Zinc plated fittings to prevent corrosion. CSA certifified. Quality machined fittings to ensure leak...

1/2" MIP x 1/2" MIP x 30" L Poly Coated Gas Connector (1/2" OD Hose) Made of yellow coated poly 304 stainless steel 1/2" OD (3/8" ID) corrugated hose. Zinc plated fittings to prevent corrosion. CSA certifified. Quality machined fittings to ensure leak...

2" DWV x 1-1/2"/1-1/4" Tubular Flexible Drain & Trap Connector 2″ DWV x 1-1/2″ tubular or 2″ DWV x 1-1/4″ tubular. Connects 2″ cast iron or plastic DWV drainage pipe to 1-1/2″ or 1-1/4″ tubular pipe. Rubber...