Braxton Harris

1/2" C-Style Beam Clamp (Plain Finish) 1/2" rod size. Maximum load: 400 LBS. UL Listed, FM approved. Federal specifications: WW-H-171 (Type 23), MSS-SP-69 (Type 23). Plain finish.

1/2" IPS x 8" Length Steel Pipe Hook FITS 1/2" IRON PIPE SIZE. 8" LENGTH. 10 GAUGE PLAIN FINISH STEEL

1/2"x 520" 3+ mil Teflon Tape - 50pc Counter Display 1/2″ width, 520″ length. Permanently seals all threaded pipe joints and valves. Pop-out spool. Meets government military specifications #MIL-T27730A. Temperature range is -500 to +650...

1/4" FPT x 1/4" FPT Shut Off Gas Cock 1/4" Female Pipe Threads x 1/4" Female Pipe Threads. Not for use with potable water.

1/8" MPT LEVER HANDLE DRAIN COCK 1/8″ MPT LEVER HANDLE DRAIN COCK  

2" Hub PVC Floor Sink w/ 3/4" Grate Dome Strainer

2" PVC Floor Drain and Trap w/ Cleanout Solvent weld 2″ DWV connection. 1-1/2″ concealed cleanout 1-1/2″ plug. Drain includes PVC strainer.  

2' mpt Backwater Device for Floor Drains w/ P-trap Brass Body Ball included. Sleeve type.  

3" Heavy Duty No-Hub Coupling Manufactured to CISPI Standard 310, ASTM C1540, IAPMO 6034. Gaskets conform to ASTM C564. Includes 4pcs 304 grade stainless steel 9/16″ band and 3/8″ S.S. screws. Stainless steel housing and shield. 80 inch/lb...

3" PVC Snap-in Drain w/ Stainless Steel Strainer Fits 3″ Schedule 40 DWV pipe. Comes with stainless steel strainer. May be solvent welded or just inserted inside of pipe. Allows for cutting drain pipe flush with the floor. May be used as a...

3" x 3" Flexible Transition Coupling Complies with ASTM C1173-2002, CSA B602-2005, UPC approved. Fits plastic, cast iron, copper and lead in any combination. All stainless steel clamps. Internal sealing beads for absolutely leak free operation and...

3-1/2" IPS S.C. Countersunk Brass Cleanout Plug 3-1/2″ IRON PIPE SIZE. SOUTHERN CODE. COUNTERSUNK SQUARE HEAD.  

3-1/2" IPS Southern Code Raised Head Brass Cleanout Plug 3-1/2″ IPS S.C. RAISED HEAD BRASS CLEANOUT PLUG 3-1/2″ IRON PIPE SIZE. SOUTHERN CODE. RAISED SQUARE HEAD.  

3/4" Barb Nylon Hose Splicer

3/4" CTS (7/8" OD) CPVC Compression Coupling 3/4″ COPPER TUBE SIZE. 5″ LENGTH. MAXIMUM PRESSURE: 125 PSI. SUITABLE FOR HOT WATER. MUST BE RESTRAINED ON BOTH ENDS.

3/4" FIP x 3/4" MIP x 72" L Uncoated Gas Connector (5/8" OD Hose) Made of uncoated 304 stainless steel 5/8″ OD (1/2″ ID) corrugated hose. Zinc plated fittings to prevent corrosion. CSA certifified. Quality machined fittings to ensure leak...

3/4" FPT Brass Stop Valve- Threaded- Lead Free 3/4″ X 3/4″ Female Pipe threads. For use with air, oil or water. Neoprene Seal Washer. Heavy cast iron handle. Mostly used where valve will be opened and closed frequently or to regulate flow. ...

3/4" Poly Insert 90 Degree Elbow Made of Polypropylene. Meets ASTM D2609. Insert fittings join to PE (Polyethylene) pipe with stainless steel clamps.. Cold water use only.

3/4" Poly Insert Coupling Made of Polypropylene. Meets ASTM D2609. Insert fittings join to PE (Polyethylene) pipe with stainless steel clamps.. Cold water use only.

3/8" F Comp x 3/8" M Comp x 1/4" M Comp Easy Connect Tee- Lead Free

3/8" FIP x 3/8" MIP x 12" L Uncoated Gas Connector (3/8" OD Hose) Made of uncoated 304 stainless steel 3/8″ OD (1/4″ ID) corrugated hose. Zinc plated fittings to prevent corrosion. CSA certifified. Quality machined fittings to ensure leak...

3/8" FIP x 3/8" MIP x 36" L Uncoated Gas Connector (3/8" OD Hose) Made of uncoated 304 stainless steel 3/8″ OD (1/4″ ID) corrugated hose. Zinc plated fittings to prevent corrosion. CSA certifified. Quality machined fittings to ensure leak...

4" Brass Offset Closet Flange 4″ pipe size. 1-1/2″ offset. For lead connection. Clip allows for four way offset.

4" SV Push-on Panella Cleanout w/ 3-1/2" Countersunk Plug w/ Gasket 4″ x SCH 40 PAN C/O WITH 3-1/2″ CSK PLUG W/ GASKET  

5/8" Flare x 1/2" Flare Brass Reducing Union 5/8" X 1/2" FLARE THREADS. Used with copper, brass, aluminum, welded steel tubing. Used on lines handling hard to hold liquids and gases, including gasoline, grease oil, water, vacuum lines, air lines, LP and...

5/8" x 100' Green Vinyl Garden Hose 5/8″ OD X 100 ft. Brass Couplings, Green Opaque Tire Cord 3 Ply Reinforced Vinyl Cover  

6" Flexible Saddle Tee w/ S.S. Series 300 Clamps THESE FLEXIBLE SADDLES DEMONSTRATE SUPERIOR FLEXIBILITY IN MORE THAN ONE WAY. THE SADDLES ELASTOMERIC CONSTRUCTION ALLOWS A SINGLE SIZE TO SECURELY FIT 6″ THROUGH 12″ PIPE DIAMETERS. THE...

6" LEAD FIT-ALL PLUG FITS 6″ PIPE. CAST IRON CORE.

8-1/2" Two Piece Tub Spout w/ Nose Diverter- Chrome Plated 1/2″ MIP CONNECTION AT WALL-END OF SPOUT  

9-1/4" OD Flat Plastic Cleanout Cover Plate- White Finish 9-1/4″ OUTSIDE DIMENSIONS. FLAT DESIGN HIDES CLEANOUT FITTING. MANUFACTURED FROM HIGH IMPACT PLASTIC. SUPPLIED WITH #14 WOOD SCREW. WHITE FINISH CAN BE PAINTED OR WALLPAPERED.  

Adjustable Tub Spout w/ Nose Diverter- Chrome Plated 5-3/8″ Length zinc body. Adjusts up to 1″. 1/2″ or 3/4″ IPS connection (with reducing bushing).  

Complete Rebuild Kit for Central Brass Lavatory Faucet - Lead Free Rebuilds Two-handle Lavatory Faucets

Jumbo Water Meter Box w/ Recessed Reading Lid Jumbo sized heavy duty plastic. 12? Deep box with reading lid. Top diameter is 21-1/2? x 14-3/4?. Bottom diameter is 25-3/4? x 19?.

Kohler Side Mount Tank Lever- Chrome Plated (30324, K-9380-L) NEW STYLE- FITS KOHLER WELLWORTH & BARRINGTON SERIES. CHROME, STYRENE SPUD, LOCKNUT & ARM  

Male Hose End Repair Coupling. Fits 1/2" & 5/8" Hose FITS 1/2″ AND 5/8″ HOSE, RUBBER OR PLASTIC. ONLY A KNIFE AND SCREWDRIVER NEEDED TO INSTALL.  

QUICK HOSE MENDER FITS 1/2″ AND 5/8″ HOSE, RUBBER OR PLASTIC. ONLY A KNIFE AND SCREWDRIVER NEEDED TO INSTALL.  

Red Korky Plus Flapper (Blister Packed) - Chemical Resistant Original red Korky Plus

Round Log Lighter Burner - Natural Gas 1-3/4? height. 4-1/2? wide. Tapped 1/2? IPS in bottom and sides. Supplied with close nipple orifice and 1/2? plug.

Tank Lever for Kohler Wellworth (30324, K-9380-L) - Rustic Oil Rubbed Bronze Old Style- Fits Kohler Wellworth, Barrington and Highline Series. 45 degree angled w/ Plastic Arm & nut w Brass Handle. Replaces: 30324, K-9380-L

Two Leg Log Lighter Burner (LP Gas) 14? length. 1-3/4? height. 2-1/4? wide. Comes with two 1/2? plugs with close nipple orifice. Ledge over burner holes prevents clogging.