Braxton Harris

1" x 9" Black Iron Nipple Meets ASTM A-53 Specs  

1-1/2" - 3" Clog Buster for Sink, Tub, Pool and Shower Inflatable hydraulic drain flusher. The most effective flusher. This unique design allows all of the water pressure to push the clog out.. Won’t damage pipes. Made in USA. Easy to use: 1)...

1-1/2" 17 Ga Brass P-trap w/ Flange- Chrome Plated 1-1/2″ outside diameter 17 gauge chrome plated brass tubular. Includes chrome plated brass nuts, washers and flange.  

1-1/2" FPT 45 Degree Bronze Street Elbow 1-1/2″ FEMALE PIPE THREADS X 1-1/2″ FEMALE PIPE THREADS, CAST BRONZE.  

1-1/2" Metal Nipple Caddy Tray Holds 30pcs (1-1/2″ x close to 6″). 19-1/2″ x 6-1/2″ x 6-1/2″. Steel construction with baked epoxy finish. Fold over handle.  

1-1/2" MPT x 1" FPT Bronze Hex Bushing- Lead Free 1-1/2″ male pipe threads x 1″ female pipe threads. Cast bronze. Max working pressure= 125 PSI steam pressure (W.S.P). 200PSI nonshock cold water, oil or gas (W.O.G.) Materials meet ASTM B...

1-1/2" MPT x 1-1/4" FPT Bronze Hex Bushing- Lead Free 1-1/2″ male pipe threads x 1-1/4″ female pipe threads. Cast bronze. Max working pressure= 125 PSI steam pressure (W.S.P). 200PSI nonshock cold water, oil or gas (W.O.G.) Materials meet...

1-1/2" Plastic P-trap w/ Adapter (premium blue washers) 1-1/2″ tubular. Made of white polypropylene plastic. Includes: 3pcs wing nuts, 3pcs premium blue slip joint washers, 1pc DWV trap adapter.  

1-1/2" PVC Schedule 40 Direct Drain for Bathwaste SCHEDULE 40

1-1/2" WIDE X 25 YARD WATERPROOF SAND CLOTH 120 GRIT. ALUMINUM OXIDE.

1-1/2" X 1-1/4" Lift Turn 1-Hole Bath Waste Trim - Chrome Plated Includes: 1-Hole Overflow Face Plate w/ screws & 1-1/4″ Lift & Turn Drain w/ 1-1/2″ Brass Conversion Bushing.  

1-1/2" X 2" (C X MPT) WROT MALE ADAPTER 1-1/2″ COPPER SWEAT X 2″ MALE PIPE THREADS. WROT COPPER.  

1-1/2" x 3/4" Brass Urinal Spud For urinal. Brass body & locknut w/ rubber washer and galvanized friction ring.  

1-1/4" (C X FPT) Wrot Female Adapter 1-1/4" Copper Sweat X 1-1/4" Female pipe threads "“ Wrot Copper "“ IAPMO Approved "“ NSF Approved

1-1/4" FPT X 1" FPT Bronze Reducing Coupling- Lead Free 1-1/4″ X 1″ FEMALE PIPE THREADS, CAST BRONZE.  

1-1/4" IPS PVC Compression (Dresser) Coupling 1-1/4″ IRON PIPE SIZE. 5-3/16″ LENGTH. MAXIMUM PRESSURE: 125 PSI. MUST BE RESTRAINED ON BOTH ENDS.  

1-1/4" MPT x 1" FPT Bronze Hex Bushing- Lead Free 1-1/4″ male pipe threads x 1″ female pipe threads. Cast bronze. Max working pressure= 125 PSI steam pressure (W.S.P). 200PSI nonshock cold water, oil or gas (W.O.G.) Materials meet ASTM B...

1-1/4" O.D. Deep box Flange- PVD Satin Nickel Fits 1-1/4" Tubular Sure Grip. The total coverage OD is 3".

1-1/4" OD x 1-1/2" MPT Brass Trap Connector (Desanko Fitting) 1-1/4″ tubular x 1-1/2″ male pipe threads or 1-1/4″ female sweat. Brass slip joint nut & brass compression ring. Desanko/ Desanco Fitting  

1-1/4" OD x MPT Brass Trap Connector (Desanko Fitting) 1-1/4″ tubular x 1-1/4″ male pipe threads or 1-1/4″ female sweat. Brass slip joint nut & brass compression ring. Desanko/ Desanco Fitting  

1-1/4" Toe Touch Bath Drain w/ 3/8" Stem- Satin Bronze Includes: Brass Body w/ 1-1/4" (1-3/8") Fine Threads, 3/8" Stem Cartridge and Washer

1/2 OD x 1/2" MPT Brass Compression Coupling- Lead Free- Chrome Plated 1/2 OD X 1/2″ MPT BRASS COMPRESSION COUPLING- CHROME PLATED1/2″ OUTSIDE DIAMETER X 1/2″ MALE PIPE THREADS. TEMPERATURE RANGES FROM -65 TO 250 DEGREES FAHRENHEIT...

1/2" (C x FPT) Forged 90 Degree Drop Ear Elbow 1/2" Copper Sweat X 1/2" Female Pipe Threads. Forged brass pressure fitting. (The forging process produces a much cleaner fitting when compared to the cast process.)

1/2" Barb x 1/4" MPT Brass Hose Barb Adapter 1/2" BARB (HOSE ID) X 1/4" MALE PIPE THREADS

1/2" Flare Brass Forged Short Nut 1/2" FLARE THREADS. Used with copper, brass, aluminum, welded steel tubing. Used on lines handling hard to hold liquids and gases, including gasoline, grease oil, water, vacuum lines, air lines, LP and natural...

1/2" Flare x 1/2" MPT Brass Elbow Style 49. 1/2" flare threads x 1/2" male pipe threads. Used with copper, brass, aluminum, welded steel tubing. Used on lines handling hard to hold liquids and gases including gasoline, grease, oil, water, vacuum lines,...

1/2" Flare x 3/8" Flare Brass Reducing Union 1/2" X 3/8" FLARE THREADS. Used with copper, brass, aluminum, welded steel tubing. Used on lines handling hard to hold liquids and gases, including gasoline, grease oil, water, vacuum lines, air lines, LP and...

1/2" Wrot Cap 1/2" Copper Sweat "“ Wrot Copper

1/4" O.D. Brass Compression Union- Lead Free 1/4" OUTSIDE DIAMETER. TEMPERATURE RANGES FROM -65 TO 250 DEGREES FAHRENHEIT. USED WITH COPPER, BRASS & ALUMINUM TUBING, LOW AND MEDIUM AIR, WATER AND OIL PRESSURE LINES.

1/4" OD X 1/4" FPT Brass Compression Elbow (lead free) 1/4" OUTSIDE DIAMETER X 1/4" FEMALE PIPE THREADS. TEMPERATURE RANGES FROM -65 TO 250 DEGREES FAHRENHEIT. USED WITH COPPER, BRASS & ALUMINUM TUBING, LOW AND MEDIUM AIR, WATER AND OIL PRESSURE LINES.

1/4" OD X 1/4" MPT Brass Compression Coupling- Lead Free 1/4" OUTSIDE DIAMETER X 1/4" MALE PIPE THREADS. TEMPERATURE RANGES FROM -65 TO 250 DEGREES FAHRENHEIT. USED WITH COPPER, BRASS & ALUMINUM TUBING, LOW AND MEDIUM AIR, WATER AND OIL PRESSURE LINES.

1/8" Barb x 1/8" MPT Brass Hose Barb Adapter 1/8" BARB (HOSE ID) X 1/8" MALE PIPE THREADS

1/8" to 1-1/8" Standard Tubing Cutter CUTTING CAPACITY: 1/8″ – 1-1/8″ OD. COMPLETE WITH SAFETY LOCK REAMER. USED FOR CUTTING ALUMINUM, COPPER, THIN-WALL STEEL AND PLASTIC TUBING.  

10" Diameter 24 Gauge Stainless Steel Extension Cover 10″ DIAMETER. CLEANOUT WALL ACCESS COVER.

2 Gallon Thermal Expansion Tank (3/4" MPT Connection) 304 STAINLESS STEEL CONNECTION. BUTYL RUBBER DIAPHRAGM. FACTORY PRE-CHARGED @ 40 PSI. MAXIMUM OPERATING TEMPERATURE: 210 DEGREES F. MAXIMUM OPERATING PRESSURE: 150 PSI. FOR 30 TO 160 GALLON WATER...

2" All PVC Snap-in Drain Fits 2″ Schedule 40 DWV pipe. Comes with stainless steel strainer. May be solvent welded or just inserted inside of pipe. Allows for cutting drain pipe flush with the floor. May be used as a strainer for vent stack or air...

2" Flexible Heavy Duty Test Cap Fits 2″ DWV pipe. Can be used on cast iron, PVC, ABS, steel pipe. Meets UPC, BOCA, CSA, Southern Building Code and other building codes. EPDM material with 300 series stainless steel clamp.  

2" FPT Brass Full Port Ball Valve- Lead Free 2″ X 2″ FEMALE PIPE THREADS. 400 PSI WATER, OIL, GAS. 150 PSI WORKING STEAM PRESSURE. HARD CHROME PLATED BRASS BALL. QUARTER TURN OPERATION. DACROMET PLATED STEEL HANDLES WITH VINYL GRIP AND...

2" Inside Caulk Cast Iron Bolt Down Shower Drain w/ Cast Strainer- Chrome Plated 2″ INSIDE CAULK CONNECTION. 6-1/2″ DIAMETER PAN. CAST IRON BOLT DOWN CLAMP RING FOR USE WITH NON LEAD PAN LINER. CLAMP RING HAS SEEPAGE GROOVES ON THE UNDERSIDE...

2" IPS Asbestos Free Ring Gasket FITS 2″ IRON PIPE. ASBESTOS FREE RING GASKET MEETS ASTM F152, F36A, F146, 1/16″ THICK. 150 LBS. MAY BE USED FOR STEAM APPLICATIONS.