Braxton Harris

1-1/4" x 8" 1pc Brass PO Plug- Chrome Plated 1-1/4″ chrome plated brass tubular with overflow. 8″ height. Comes complete with chain and rubber stopper.  

1-1/4"x 1-1/2" Lift/ Turn Drain Tub Drain- Aged Pewter Will fit 1-1/4" or 1-1/2" w/ Brass Bushing. Solid Brass. Screw in handle design. 1-1/4" (1-3/8") Fine Threads Drain w/ 1-1/2" Coarse Threads. Screw-in Handle Design to aid in ease of installation...

1/2" & 3/4" Combo Plastic Nipple Caddy Tray HOLDS 39 PCS -1/2″ & 33 PCS -3/4″ NIPPLES. HAS A CENTER COMPARTMENT TO HOLD PUTTY, TAPE, ETC. MADE OF HIGH IMPACT PLASTIC. WILL NOT RUST OR CORRODE. STRONG ENOUGH TO TAKE THE ABUSE YET...

1/2" & 3/4" Competitive Combo Plastic Nipple Caddy Tray HOLDS 39 PCS -1/2" & 33 PCS -3/4" NIPPLES. HAS A CENTER COMPARTMENT TO HOLD PUTTY, TAPE, ETC. MADE OF HIGH IMPACT PLASTIC. WILL NOT RUST OR CORRODE. STRONG ENOUGH TO TAKE THE ABUSE YET ONE-HALF THE...

1/2" Copper Sizing Tool For 1/2" cts type M copper tubing. Impacts pipe to re-round tubing.

1/2" FIP x 1/2" FIP x 24" L Black Poly Coated Gas Connector (1/2" OD Hose) Made of black coated 304 stainless steel 1/2"OD (3/8" ID) corrugated hose. Black coating used in fireplaces. Zinc plated fittings fittings to prevent corrosion. CSA certifified...

1/2" FIP x 1/2" FIP x 24" L Poly Coated Gas Connector (1/2" OD Hose) Made of yellow coated poly 304 stainless steel 1/2" OD (3/8" ID) corrugated hose. Zinc plated fittings to prevent corrosion. CSA certifified. Quality machined fittings to ensure leak...

1/2" FIP x 1/2" FIP x 72" L Poly Coated Gas Connector (3/8" OD Hose) Made of yellow poly coated 304 stainless steel 3/8" OD (1/4" ID) corrugated hose. Zinc plated fittings to prevent corrosion. CSA certifified. Quality machined fittings to ensure leak...

1/2" FIP x 1/2" MIP x 24" L Uncoated Gas Connector (5/8" OD Hose) Made of uncoated 304 stainless steel 5/8″ OD (1/2″ ID) corrugated hose. Zinc plated fittings to prevent corrosion. CSA certifified. Quality machined fittings to ensure leak...

1/2" Flare x 3/8" MPT Brass Elbow Style 49. 1/2" flare threads x 3/8" male pipe threads. Used with copper, brass, aluminum, welded steel tubing. Used on lines handling hard to hold liquids and gases including gasoline, grease, oil, water, vacuum lines,...

1/2" FPT Angle Log Lighter Valve w/ Key and Escutcheon (CSA Approved) 1/2″ x 1/2″ female pipe threads. Comes with valve, chrome plated escutcheon and 2-1/2″ x 1/4″ key. CSA approved. BTU rating: 120,000. If longer escutcheon is...

1/2" FPT Brass Full Port Ball Valve- Lead Free 1/2″ X 1/2″ FEMALE PIPE THREADS. 400 PSI WATER, OIL, GAS. 150 PSI WORKING STEAM PRESSURE. HARD CHROME PLATED BRASS BALL. QUARTER TURN OPERATION. DACROMET PLATED STEEL HANDLES WITH VINYL GRIP AND...

1/2" FPT Chrome Plated Brass Tee- Lead Free 1/2″ FEMALE PIPE THREADS, CAST BRASS.  

1/2" FPT Galvanized Malleable Banded Tee 150PSI. Suitable for use with schedule 40 pipe and pipe nipples.

1/2" FPT Galvanized Malleable Cap 150PSI. Suitable for use with schedule 40 pipe and pipe nipples.

1/2" FPT LEVER HANDLE GAS COCK 1/2″ FEMALE PIPE THREADS. BRASS. TAPERED PLUG CONSTRUCTION. EXTERNAL BOTTOM CHECK. THREADED TO ANSI B1.20.1 SPECIFICATIONS.  

1/2" FPTx1/2" MPT 90 Deg Chrome Pl Street Elbow- Lead Free 1/2″ female pipe threads x 1/2″ male pipe threads. Lead free.  

1/2" IPS Utility Shower w/ Soap Dish- Chrome Plated Chrome plated brass 1/2″ union for threaded or sweat. Includes valve (3″ centers), 24″ galvanized riser, soap dish and showerhead. Valve is reversible for top inlet connections. ...

1/2" IPS x 3" S.S. 1-Bolt Repair Clamp Fits 1/2″ iron pipe size/ schedule 40 and 3/4″ copper tube size. 3″ length. Type 301 stainless steel shield. Plated malleable iron lugs (ASTM A47 Grade 32610). High content neoprene gasket with...

1/2" mip/swt x 12" Multi-turn Frost Free Sillcock 1/2″ MALE PIPE THREADS & 1/2″ COPPER TUBE SIZE INLET. 3/4″ MALE HOSE THREAD OUTLET. HEAVY BRASS CONSTRUCTION. 12″ LENGTH. CHROME PLATED. NOTCHED FOR STABLE INSTALLATION. ...

1/2" mip/swt x 14" Multi-turn Frost Free Sillcock 1/2″ MALE PIPE THREADS & 1/2″ COPPER TUBE SIZE INLET. 3/4″ MALE HOSE THREAD OUTLET. HEAVY BRASS CONSTRUCTION. 14″ LENGTH. CHROME PLATED. NOTCHED FOR STABLE INSTALLATION. ...

1/2" MPT x 1/2" FPT Air Cock Tee Handle w/ Round Shoulder 1/2″ MALE PIPE THREADS X 1/2″ FEMALE PIPE THREADS. ROUND SHOULDER. SOLID BRASS. FURNISHED WITH SPRING BOTTOM.  

1/2" Plastic Nipple Caddy Tray 11″ X 7-1/2″ DIMENSIONS. HOLDS 77 NIPPLES. MADE OF HIGH IMPACT PLASTIC. WILL NOT RUST OR CORRODE. STRONG ENOUGH TO TAKE THE ABUSE YET ONE-HALF THE WEIGHT OF METAL.  

1/4" OD Brass Compression Elbow- Lead Free 1/4" OUTSIDE DIAMETER. TEMPERATURE RANGES FROM -65 TO 250 DEGREES FAHRENHEIT. USED WITH COPPER, BRASS & ALUMINUM TUBING, LOW AND MEDIUM AIR, WATER AND OIL PRESSURE LINES.

1/4" x 3" Long Magnetic Holder MAGNETIC BIT HOLDER FOR 1/4″ BITS  

10" Clear Water Filter Housing w/ Mounting Bracket Patented double O-ring seal. 12-1/2″ tall x 4-1/2″ wide. Uses 10″ filters with housing. 3/4″ inlet/outlet. Max pressure is125 PSI. Max temperature is 125 degrees Fahrenheit...

10" Hoov-R-Line* Style Anti-Siphon Ballcock ADJUSTABLE WATER LEVEL. POSITIVE SNAP SHUT OFF. NON-CORRODING, RUGGED, DEPENDABLE & QUIET OPERATION. REPLACEABLE VALVE SEAT. MEET ASSE 1002 & GSA REQUIREMENTS.

10" IPS Flange Connection Kit w/ Full Face Rubber Gasket FITS 10" IRON PIPE. BOLT SIZE: 7/8" DIAMETER X 3-3/4" LENGTH. KIT INCLUDES: 12 BOLTS, 12 NUTS, 1 RED RUBBER FULL FACE GASKET. HEX BOLTS AND NUTS MEET ASTM A307. RUBBER GASKETS MEET ASTM D1330. 150...

10" IPS Southern Code Raised Head Brass Cleanout Plug 10″ IRON PIPE SIZE. SOUTHERN CODE. RAISED SQUARE HEAD.  

114' 1-5/8" ID x 1/2" Wall Seamless Rubber Pipe Insulation, 19 Per Carton 1-5/8" ID x 1/2" Wall Thickness. 6 Foot Lengths. Fits 1-1/2" CTS, 1-1/4" IPS. R Factor: 3.1. Flame Spread Rating & Smoke Rating: <25/50. Will Not Contribute Significantly To...

2" Brass Closet Spud Brass body and locknut with rubber washer and galvanized friction ring.  

2" Brass Spud w/ 4" Square Cast Screw-in Strainer- Brushed Brass Strainer Strainer OD is 3-7/8″ x 3-7/8″ OD. Grouting ring is 4-5/16″ x 4-5/16″ OD. 3-1/4″ screw hole to screw hole distance. Comes w/ heavy cast brass spud w/...

2" Brass Spud w/ 4" Square Cast Screw-in Strainer- Chrome Plated Strainer OD is 3-7/8″ x 3-7/8″ OD. Grouting ring is 4-5/16″ x 4-5/16″ OD. 3-1/4″ screw hole to screw hole distance. Comes w/ heavy cast brass spud w/ grout...

2" Cast Iron Cleanout w/ 1-1/2" Countersunk Brass Plug STANDARD BODY CLEANOUT (PLAIN END). FITS 2″ PIPE SIZE. 1-1/2″ COUNTERSUNK SOUTHERN CODE PLUG SIZE. FOR SERVICE WEIGHT OR NO-HUB.

2" Cast Iron Trap Standard w/ Stainless Steel Strainer 2″ PIPE SIZE. STAINLESS STEEL STRAINER. FITS KOHLER, AMERICAN STANDARD, ELJER AND CRANE CAST IRON SERVICE SINKS. ADJUSTABLE.  

2" Compound Pressure/ Vacuum Gauge 2″ FACE, 2 LB. INCREMENTS, STEEL CASE, 1/4″ MIP LOWER BRASS CONNECTION, 0-150 LB. RANGE. 0-30 IN VACUUM.  

2" Hub PVC Floor Sink Base Only (less strainer/grate)

2" Inside Caulk Cast Brass Floor Drain w/ S.S. Stamped Strainer FOR USE IN AREAS WHERE A PAN LINER IS NOT REQUIRED. COMES WITH A STAINLESS STEEL SCREW IN STRAINER.  

2" IPS Long Brass Compression Coupling- Lead Free 2″ Iron Pipe size, 5″ length, maximum pressure: 125 PSI, maximum temperature: 140 degrees Fahrenheit. All Compression Coupling must be restrainedon ends.

2" LEAD FIT-ALL PLUG FITS 2″ PIPE. CAST IRON CORE.