Braxton Harris

3/4" IPS x 6" S.S. 2-Bolt Repair Clamp Fits 3/4″ iron pipe size/ schedule 40 and 1″ copper tube size. 6″ length. Type 301 stainless steel shield. Plated malleable iron lugs (ASTM A47 Grade 32610). High content neoprene gasket with...

3/4" MIP x 1/2" MIP x 24" L Poly Coated Gas Connector (5/8" OD Hose) Made of yellow poly coated 304 stainless steel 5/8" OD (1/2" ID) corrugated hose. Zinc plated fittings to prevent corrosion. CSA certifified. Quality machined fittings to ensure leak...

3/4" MIP x 1/2" MIP x 60" L Poly Coated Gas Connector (5/8" OD Hose) Made of yellow poly coated 304 stainless steel 5/8" OD (1/2" ID) corrugated hose. Zinc plated fittings to prevent corrosion. CSA certified. Quality machined fittings to ensure leak...

3/4" MIP x 3/4" MIP x 12" L Poly Coated Gas Connector (5/8" OD Hose) Made of yellow poly coated 304 stainless steel 5/8" OD (1/2" ID) corrugated hose. Zinc plated fittings to prevent corrosion. CSA certified. Quality machined fittings to ensure leak...

3/4" Nylon Male Insert Adapter MADE OF NYLON

3/4" Plastic Nipple Caddy Tray 13-1/4″ X 7-7/8″ DIMENSIONS. HOLDS 66 NIPPLES. MADE OF HIGH IMPACT PLASTIC. WILL NOT RUST OR CORRODE. STRONG ENOUGH TO TAKE THE ABUSE YET ONE-HALF THE WEIGHT OF METAL.  

3/4" x 100' Plastic Hanger Tape 3/4″ WIDTH. 100 FEET LENGTH. .05 THICKNESS. 1/8″ HOLE PERFORATIONS SPACED 3/4″ APART. 125 LB. MAXIMUM LOAD (ASTM A-370-77) FLEXIBLE, NON-CONDUCTIVE, NON-ABRASIVE. USED AS A PIPE HANGER, DUCT HANGER,...

3/4" x 50' Contractor Grade Garden Hose Contractor grade. 50 ft. Reinforced rubber. Heavy duty brass coupling  

3/8" FIP x 1/2" MIP x 72" L Poly Coated Gas Connector (3/8" OD Hose) Made of yellow poly coated 304 stainless steel 3/8" OD (1/4" ID) corrugated hose. Zinc plated fittings to prevent corrosion. CSA certifified. Quality machined fittings to ensure leak...

3/8" MIP x 3/8" MIP x 24" L Poly Coated Gas Connector (1/2" OD Hose) Made of yellow coated poly 304 stainless steel 1/2" OD (3/8" ID) corrugated hose. Zinc plated fittings to prevent corrosion. CSA certifified. Quality machined fittings to ensure leak...

3/8" MPT MALE PETCOCK

3/8" X 3/8" X 1/4" OD Brass Compression Tee 3/8" X 3/8" X 1/4" OUTSIDE DIAMETER. TEMPERATURE RANGES FROM -65 TO 250 DEGREES FAHRENHEIT. USED WITH COPPER, BRASS & ALUMINUM TUBING, LOW AND MEDIUM AIR, WATER AND OIL PRESSURE LINES.

3/8"OD x 1/4"ID x 100' Polyethelene Tubing 100 FEET OF 100% VIRGIN POLYETHELENE. LOW DENSITY. NON-TOXIC. 3/8" OD, 1/4" ID, 1/16" WALL THICKNESS, 125 PSI WORKING PRESSURE AT 70 DEGREES FERENHEIT

30" x 30" Galvanized Water Heater Pan Drilled w/ Fitting 24 Gauge GALVANIZED. 4" DEEP. 30" X 30". 1" ADAPTER HOOK UP.

300 lb. Water Test Gauge 2-1/2″ Shatterproof face with steel case. 3/4″ female hose thread connection with rubber washer.  

35 oz. 6' Hand Water Pump w/ 6' Discharge Hose Made of high impact, none sparking PVC. Hose is 6′ length and 1-1/4″ diameter. Pump is 3′ length and 1-3/4″ diameter 35 oz. of water per stroke. 4 strokes removes 1 gallon of water...

4 -way Heavy Duty Screwdriver DURABLE BITS: 2 SLOTTED AND 2 PHILLIPS. 7-1/2″ LENGTH.  

4" Cast Iron Wing Nut Test Plug - Straight STRAIGHT PATTERN. CAST IRON. FITS INSIDE 4″ PIPE. UNEXPANDED OUTER DIMENSION IS 3-5/8″.  

4" Flexible Rubber Cleanout / Test Cap Fits 4" DWV pipe. Can be used on cast iron, PVC, ABS, steel pipe. Meets UPC, BOCA, CSA, Southern Building Code and other building codes. EPDM material with 300 series stainless steel clamp.

4" Flexible Saddle Wye w/ S.S. Series 300 Clamps THESE FLEXIBLE SADDLES DEMONSTRATE SUPERIOR FLEXIBILITY IN MORE THAN ONE WAY. THE SADDLES ELASTOMERIC CONSTRUCTION ALLOWS A SINGLE SIZE TO SECURELY FIT 6″ THROUGH 12″ PIPE DIAMETERS. THE...

4" Galvanized Mechanical Test Plugs Galvanized Steel Flanges with Molded Rubber Gaskets. Fits both cast iron and PVC pipe. Fits minimum pipe ID 3.78″ and maximum pipe ID 4.5″. Maximum back pressure water head is 5 feet Maximum back pressure...

4" IPS PVC Extension Cover Plug w/ 1/4" Brass Insert 1/4″ x 20tpi brass insert

4" No-hub Cast Iron White Porcelain Floor Sink Less Grate 12″Lx12″Wx6″D. White porcelain coated cast iron. Aluminum dome bottom strainer included.  

4" PVC General Purpose Drain w/ 6-3/16" Stainless Steel Round Stamped Strainer

4" PVC Hub Fitting Cleanout w/ 3-1/2" IPS PVC Cleanout Plug

4" Steel Pouring Ladle- 3.5 lb Lead Capacity

4" X 1-1/2" (CXC) Wrot Reducer Coupling 4" Copper Sweat X 1-1/2" Copper Sweat "“ Wrot Copper "“ IAPMO Approved "“ NSF Approved

4" X 3" X 3" (C X C X C) Wrot Tee 4" Copper Sweat X 3" Copper Sweat X 3" Copper Sweat "“ Wrot Copper "“ IAPMO Approved "“ NSF Approved

4" x 4" Cast Iron Push-in Closet Flange Fits inside 4″ cast iron or schedule 40 DWV pipe. 4″ barrel length

4" x 4" x 2" Cast Iron Inside Caulk Offset Closet Flange ADJUSTABLE. FITS 4″ PIPE X 2″ DEPTH. INSIDE CAULK CONNECTION. 2″ OFFSET.  

4" X 6" Heavy Pattern Cast Iron Closet Flange FITS 4″ EXTRA HEAVY PIPE X 6″ DEPTH. CAULK CONNECTION. NOTCHED AND SLOTTED.

4-1/4" OD Bell Cleanout Cover Plate- Matte Chrome Finish 4-1/4″ OUTSIDE DIMENSIONS. BELL DESIGN USED WHEN CLEANOUT FITTING IS NOT RECESSED INTO WALL. BELL IS 1-1/4″ DEEP. CLEANOUT FITTING. MANUFACTURED FROM HIGH IMPACT PLASTIC. SUPPLIED WITH...

4-1/4" OD Flat Cleanout Cover Plate- Matte Chrome Finish 4-1/4″ OUTSIDE DIMENSIONS. FLAT DESIGN HIDES CLEANOUT FITTING. MANUFACTURED FROM HIGH IMPACT PLASTIC. SUPPLIED WITH #14 WOOD SCREW.  

4-1/4" OD Square Strainer w/ 3-3/8" Screw Holes- Chrome Plated Forged brass material. Forging is a much cleaner process giving a much smoother finish than the traditional cast process. 4-1/4" outside diameter. 3-3/8" Screw hole to screw hole centers...

4-1/8" OD Floor & Ceiling Plate Heavy Pattern (4″ NOMINAL CTS) HEAVY GAUGE CHROME PLATED  

4-n-1 Tubing Bender 3/16", 1/4", 5/16",3/8" 4-IN-1 TUBING BENDER / 3/16″, 1/4″, 5/16″,3/8″  

42 Gallon Heavy Duty Trash Bag (3 Mil) 32″ x 50″ size. 3 mil. (20 Bags per box) Priced per box.  

5" LEAD FIT-ALL PLUG FITS 5″ PIPE. CAST IRON CORE.

5' Steel Probing Rod Welded-steel construction. 24″ Tee handle. 1/2″ steel. 60″ length.  

5-1/4" OD Flat Cleanout Cover Plate- Matte Chrome Finish 5-1/4″ OUTSIDE DIMENSIONS. FLAT DESIGN HIDES CLEANOUT FITTING. MANUFACTURED FROM HIGH IMPACT PLASTIC. SUPPLIED WITH #14 WOOD SCREW.