Braxton Harris

2" x 100 Lbs Pressure Gauge, 2 lb Increments 2″ Face 1/4 MIP Brass Lower Connection Steel Case Shatterproof Face. May Be Used With Air Water Oil Gas Or Any Other Medium Not Corrosive To Brass.  

3" Lead Fit-all Plug Top of threads are 3″ across, bottom are 2 13/16″ across. Threads are 3/4″ long

5/8" BARB X 1/2" MPT BRASS ELBOW

6"x6" Make-A-Gasket Rubber Sheet (1/16" thick) RED RUBBER. 6″ X 6″ DIAMETER, 1/16″ THICKNESS. CUT INTO GASKETS, SHIMS, VIBRATION DAMPERS, SEALS, ETC.  

Rectangular Log Lighter Burner w/ Removable Lid

1" FPT Galvanized Malleable Banded 90º Elbow 150PSI. Suitable for use with schedule 40 pipe and pipe nipples.

1-1/2" (CXC) Wrot Copper 90 Degree Elbow 1-1/2" Copper Sweat X 1-1/2" Copper Sweat "“ Wrot Copper "“ IAPMO Approved "“ NSF Approved

1-1/2" (CXC) Wrot Coupling w/ Dimpled Tube Stop 1-1/2" Copper Sweat X 1-1/2" Copper Sweat "“ Wrot Copper "“ IAPMO Approved "“ NSF Approved

1-1/2" FPT Threaded Bronze Union- Lead Free 1-1/2″ FEMALE PIPE THREADS, CAST BRONZE.  

1-1/4" Galvanized Split Ring for Iron Pipe FITS 1-1/4" iron pipe. Rod size: 3/8". Galvanized finish.

1-1/4" X 8" 17 Gauge Slip Joint Extension- Polished Unlacquered Brass 1-1/4" O.D. Tubular. 8" Length. Slip Joint On One End. Includes Brass Nut & Washer.

1/2" Flare x 1/2" MPT Brass Half Union 1/2" FLARE THREADSX 1/2" MALE PIPE THREAD. Used with copper, brass, aluminum, welded steel tubing. Used on lines handling hard to hold liquids and gases, including gasoline, grease oil, water, vacuum lines, air...

1/4" FPT 45 Degree Bronze Elbow- Lead Free 1/4″ FEMALE PIPE THREADS X 1/4″ FEMALE PIPE THREADS, CAST BRONZE.  

1/4" FPT 45 Degree Bronze Street Elbow 1/4″ FEMALE PIPE THREADS X 1/4″ FEMALE PIPE THREADS, CAST BRONZE.  

1/4" FPT BRONZE CROSS 1/4″ X 1/4″ X 1/4″ X 1/4″ FEMALE PIPE THREADS, CAST BRASS.  

2-1/2" CTS Copper Plated Split Ring for Copper Tubing Fits 2-1/2" Copper tube size. Rod size: 3/8".

2-1/2" IPS Asbestos Free Ring Gasket (150# 1/16" thick) FITS 2-1/2″ IRON PIPE. ASBESTOS FREE RING GASKET MEETS ASTM F152, F36A, F146, 1/16″ THICK. 150 LBS. MAY BE USED FOR STEAM APPLICATIONS.  

3" Snap-in Drain Cover- Stainless Steel Fits 3″ Pipe. 4-1/8″ outside diameter. Heavy duty. Covers all cast iron, clay, tile and plastic pipe drains. Plastic pipe drains. Ideal for swimming pool drains.  

3" x 4" PVC 45 Degree Closet Flange w/ Plastic Swivel Ring Less knockout and pipe stop. Comes with plastic swivel ring. Fits outside of 3″ and inside of 4″ DWV pipe.  

3-3/8" Heavy Cast Brass Basket Strainer Locknut 4" DUO STRAINER.

3/4" IPS PVC Compression (Dresser) Coupling 3/4″ IRON PIPE SIZE. 3-15/16″ LENGTH. MAXIMUM PRESSURE: 125 PSI. MUST BE RESTRAINED ON BOTH ENDS.  

3/4" x 3/4" MIP Poly Male Insert Adapter Made of Polypropylene. Meets ASTM D2609. Insert fittings join to PE (Polyethylene) pipe with stainless steel clamps.. Cold water use only.

3/8" FPT Standard Galvanized Merchant Coupling

3/8" OD x 3/8" FPT Brass Compression Elbow (lead free) 3/8" OUTSIDE DIAMETER X 3/8" FEMALE PIPE THREADS. TEMPERATURE RANGES FROM -65 TO 250 DEGREES FAHRENHEIT. USED WITH COPPER, BRASS & ALUMINUM TUBING, LOW AND MEDIUM AIR, WATER AND OIL PRESSURE LINES.

4" IPS PVC RAISED HEAD CLEANOUT PLUG

4" Snap-in Drain Cover- Stainless Steel Fits 4″ Pipe. 5-1/8″ outside diameter. Heavy duty. Covers all cast iron, clay, tile and plastic pipe drains. Plastic pipe drains. Ideal for swimming pool drains.  

6" Cast Iron Wing Nut Test Plug - Straight STRAIGHT PATTERN. CAST IRON. FITS INSIDE 6″ PIPE. UNEXPANDED OUTER DIMENSION IS 5-1/2″.  

7-1/4" OD Bell Cleanout Cover Plate- White Finish 7-1/4″ OUTSIDE DIMENSIONS. BELL DESIGN USED WHEN CLEANOUT FITTING IS NOT RECESSED INTO WALL. BELL IS 1-1/4″ DEEP. CLEANOUT FITTING. MANUFACTURED FROM HIGH IMPACT PLASTIC. SUPPLIED WITH #14...

Close Quarter Hacksaw CUTS STEEL, WOOD, PLASTIC AND BRASS. NICKEL PLATED STEEL FRAME.  

Commercial Grade Round Open Front Plastic Toilet Seat- White (New Part# DCP-RO-WH) WITHOUT COVER. COMMERCIAL GRADE/ HEAVY DUTY. INCLUDES CORROSION-PROOF NUTS AND BOLTS.  

Large Tray for 5 Gallon Bucket Caddy

Pop-up Sewer Relief Valve for 3" or 4" PVC Pipe Automatic relief valve for sewer cleanout riser. Fits standard 3″ or 4″ cleanout connections.  

1" Poly Insert Elbow Made of Polypropylene. Meets ASTM D2609. Insert fittings join to PE (Polyethylene) pipe with stainless steel clamps.. Cold water use only.

1-1/2" S.J. x 1-1/2" FSWT Marvel Adapter 1-1/2″ Slip Joint x 1-1/2″ Female Sweat marvel adapter. Used on closet/urinal stub-out adapter  

1-1/2" Slip Joint Nut- Rough Brass 1-1/2" IPS X 1-1/2" TUBE

1-1/2" x 10 Yard Sand Cloth (120 grit) 1-1/2″ wide. 10 yard length. 120 grit aluminum oxide. Water resistant.  

1-1/2" x 16" D/C End Outlet Telescopic Waste w/ 3/4" Branch 1-1/2″ tubular. Made of white polypropylene plastic. Can be used to connect drains up to a 17″ span (center drain to center drain). Has direct connections with 3/4″(7/8″...

2" T-cone Cleanout Repair Plug EASILY REPAIRS DAMAGED OR CORRODED METAL OR PLASTIC CLEANOUT THREADS.  

3" Flapper for Eljer Titan (#495-6077-00)- Blister Packed Individually blister packaged. Replaces #495-6077-00. Fits Titan Models: Titan 17″ (091-0770, 091-0772, 091-0773, 091-0773, 091-0776, 091-0777, 091-2778 , 091-0782) and Titan 15″...

3" x 2" Cast Iron Quick Set Closet Flange 3″ pipe size x 2″ depth.. Includes four corrosion resistant bolts for even clamping. The neoprene gasket meets ASTM C564.Cuts installation time by 80%. Ideal for repair or new construction.