Spears
PVC DWV 22.5 Degree Elbow (H x H)
- SKU:
- P324
- Availability:
- Usually Ships Same Day
- Weight:
- 0.00 LBS
Description
PVC DWV 22.5 Degree Elbow (H x H)
PVC DWV 22.5 Degree Elbow (H x H) provides a gradual 22.5-degree change in direction within compatible PVC drain, waste, and vent piping. The fitting uses hub connections at both ends to receive appropriately sized compatible PVC DWV pipe.
The H x H 22.5 degree elbow configuration provides a compact directional adjustment within compatible DWV piping arrangements. Selection should account for nominal size, hub compatibility, adjoining pipe, required direction change, joining requirements, piping alignment, support, and available installation clearance.
Product Highlights
- PVC construction
- DWV fitting design
- 22.5° elbow configuration
- Hub x hub connections
- Provides a gradual directional change
- Receives compatible PVC DWV pipe
- Supports minor piping direction adjustments
- Changes compatible PVC DWV piping direction by 22.5 degrees
Technical Specifications
| Product Type | 22.5° Elbow |
|---|---|
| Material | PVC |
| System Type | DWV |
| Connection | Hub x Hub (H x H) |
| Connection Count | Two |
| Fitting Configuration | 22.5° Elbow |
| Hub Interface | Compatible PVC DWV Pipe |
| Connection Style | Hub x Hub |
| Joining Method | Compatible PVC DWV Joining Procedure |
| Directional Change | 22.5° |
| Piping Configuration | Gradual Angled DWV Transition |
| Primary Function | Provide a 22.5-Degree Change in Direction Within Compatible PVC DWV Piping |
22.5° Elbow Design
The 22.5-degree elbow configuration provides a gradual directional transition within compatible PVC DWV piping. Its two hub openings allow appropriately sized pipe sections to connect directly to the fitting.
The elbow orientation should be established before permanent joining so both openings correspond with the intended piping route. Planning the position helps coordinate adjoining pipe, nearby fittings, support, and available working clearance.
Hub Connections
The hub connections receive appropriately sized compatible PVC DWV pipe at both ends of the elbow. Both openings should be matched to the intended pipe before permanent assembly.
The mating pipe and hub surfaces should be prepared using the appropriate PVC DWV joining procedure. Proper insertion, compatible joining materials, correct elbow orientation, and careful alignment help establish the connections without unnecessary stress on the fitting.
PVC DWV Integration
The PVC DWV construction allows the elbow to integrate into compatible drain, waste, and vent piping arrangements requiring a gradual directional change. Matching the nominal size and hub interfaces to the adjoining PVC pipe helps maintain the intended piping configuration.
Application suitability should be evaluated using the requirements of the complete DWV system. Adjoining materials, connection compatibility, joining materials, piping support, slope where applicable, and local installation requirements should all be considered during fitting selection.
22.5° Directional Transition
A PVC DWV 22.5 Degree Elbow provides a compact method of making a smaller directional adjustment than a 45- or 90-degree elbow. The H x H arrangement allows compatible PVC DWV pipe to enter both openings of the fitting.
Installation planning should consider elbow orientation, adjoining pipe alignment, nearby components, available clearance, and piping support. Connected piping should align naturally without forcing the fitting into position.
Installation & Selection Considerations
- Confirm the nominal size.
- Verify the H x H arrangement.
- Check PVC DWV compatibility.
- Confirm the required 22.5° orientation.
- Align adjoining pipe before assembly.
Our PVC fitting specialists can help review your nominal size, DWV requirements, H x H configuration, adjoining PVC pipe, required 22.5-degree orientation, joining requirements, piping alignment, support requirements, and available installation clearance before you order.
Frequently Asked Questions
What is a PVC DWV 22.5 Degree Elbow used for?
It provides a gradual 22.5-degree change in direction within compatible PVC DWV piping.
What does H x H mean?
It identifies hub connections at both ends of the fitting.
What connects to the hub openings?
The hub openings receive appropriately sized compatible PVC DWV pipe.
What directional change does this elbow provide?
The fitting provides a 22.5-degree change in the piping direction.
Does elbow orientation matter?
Yes. The elbow should be positioned so the 22.5-degree transition corresponds with the intended piping route.
What should I confirm before ordering?
Confirm the nominal size, H x H arrangement, PVC DWV compatibility, and required elbow orientation.
Important Ordering & Installation Notes
- Inspect both hubs before use.
- Confirm the nominal connection size.
- Verify the H x H arrangement.
- Prepare adjoining pipe correctly.
- Set the elbow orientation before assembly.
