Spears
PVC DWV 60 Degree Elbow (H x H)
- SKU:
- P319
- Availability:
- Usually Ships Same Day
- Weight:
- 0.00 LBS
Description
PVC DWV 60 Degree Elbow (H x H)
PVC DWV 60 Degree Elbow (H x H) provides a 60-degree directional transition within compatible PVC drain, waste, and vent piping. The elbow configuration uses hub connections at both ends to receive appropriately sized compatible PVC DWV pipe.
The H x H 60 degree elbow configuration provides a directional change while maintaining hub connection interfaces at both ends. Selection should account for nominal size, hub compatibility, adjoining pipe, elbow orientation, joining requirements, piping alignment, support, and available installation clearance.
Product Highlights
- PVC construction
- DWV fitting design
- Elbow configuration
- 60° directional transition
- Hub x hub connections
- Receives compatible PVC DWV pipe
- Provides an angled piping transition
- Changes the direction of compatible PVC DWV piping by 60 degrees
Technical Specifications
| Product Type | 60° Elbow |
|---|---|
| Material | PVC |
| System Type | DWV |
| Connection | Hub x Hub (H x H) |
| Connection Count | Two |
| Fitting Configuration | 60° Elbow |
| Hub Interface | Compatible PVC DWV Pipe |
| Connection Style | Hub x Hub |
| Joining Method | Compatible PVC DWV Joining Procedure |
| Directional Change | 60° |
| Piping Configuration | Angled Directional Transition |
| Primary Function | Provide a 60-Degree Change in Direction Within Compatible PVC DWV Piping |
60° Elbow Design
The 60-degree elbow configuration redirects compatible PVC DWV piping through a 60-degree directional transition. This allows the piping route to change direction without requiring a right-angle elbow configuration.
The elbow orientation should be established before permanent joining so both hub openings correspond with the intended piping route. Planning the position helps coordinate adjoining pipe, nearby fittings, support, and available working clearance.
Hub Connections
The hub connections receive appropriately sized compatible PVC DWV pipe at both ends of the elbow. Both openings should be matched to the intended nominal pipe size before permanent assembly.
The mating pipe and hub surfaces should be prepared using the appropriate PVC DWV joining procedure. Proper insertion, compatible joining materials, correct elbow orientation, and careful alignment help establish the connections without unnecessary stress on the fitting.
PVC DWV Integration
The PVC DWV construction allows the elbow to integrate into compatible drain, waste, and vent piping arrangements requiring a 60-degree directional transition. Matching the nominal size and hub interfaces to the adjoining PVC pipe helps maintain the intended piping configuration.
Application suitability should be evaluated using the requirements of the complete DWV system. Adjoining materials, connection compatibility, joining materials, piping support, routing, and local installation requirements should all be considered during fitting selection.
60° Directional Transition
A PVC DWV 60 Degree Elbow provides an angled method of redirecting compatible piping within a DWV layout. The H x H arrangement allows compatible PVC DWV pipe to enter both hub openings of the fitting.
Installation planning should consider elbow orientation, adjoining pipe alignment, nearby components, available clearance, and piping support. Connected pipe should align naturally without forcing the fitting into position.
Installation & Selection Considerations
- Confirm the nominal size.
- Verify the H x H arrangement.
- Check PVC DWV compatibility.
- Confirm the required 60° orientation.
- Align adjoining pipe before assembly.
Our PVC fitting specialists can help review your nominal size, DWV requirements, H x H configuration, adjoining PVC pipe, required 60-degree orientation, joining requirements, piping alignment, support requirements, and available installation clearance before you order.
Frequently Asked Questions
What is a PVC DWV 60 Degree Elbow used for?
It provides a 60-degree change in direction within compatible PVC DWV piping.
What does H x H mean?
It identifies hub connections at both ends of the elbow.
What connects to the hub openings?
The hub openings receive appropriately sized compatible PVC DWV pipe.
How much does this elbow change piping direction?
The elbow provides a 60-degree directional transition.
Does elbow orientation matter?
Yes. The elbow should be positioned so the 60-degree transition corresponds with the intended piping route.
What should I confirm before ordering?
Confirm the nominal size, H x H arrangement, PVC DWV compatibility, and required 60-degree orientation.
Important Ordering & Installation Notes
- Inspect both hubs before use.
- Confirm the nominal connection size.
- Verify the H x H arrangement.
- Prepare adjoining pipe correctly.
- Set the elbow orientation before assembly.
