Spears
PVC DWV 45 Degree Elbow (H x H)
- SKU:
- P321
- Availability:
- Usually Ships Same Day
- Weight:
- 0.00 LBS
Description
PVC DWV 45 Degree Elbow (H x H)
PVC DWV 45 Degree Elbow (H x H) provides a 45-degree change in direction within compatible PVC drain, waste, and vent piping. The fitting uses hub connections at both ends to receive appropriately sized compatible PVC DWV pipe.
The H x H 45 degree elbow configuration provides a compact angled transition within compatible DWV piping arrangements. Selection should account for nominal size, hub compatibility, adjoining pipe, required direction change, joining requirements, piping alignment, support, and available installation clearance.
Product Highlights
- PVC construction
- DWV fitting design
- 45° elbow configuration
- Hub x hub connections
- Provides an angled transition
- Receives compatible PVC DWV pipe
- Supports directional piping changes
- Changes compatible PVC DWV piping direction by 45 degrees
Technical Specifications
| Product Type | 45° Elbow |
|---|---|
| Material | PVC |
| System Type | DWV |
| Connection | Hub x Hub (H x H) |
| Connection Count | Two |
| Fitting Configuration | 45° Elbow |
| Hub Interface | Compatible PVC DWV Pipe |
| Connection Style | Hub x Hub |
| Joining Method | Compatible PVC DWV Joining Procedure |
| Directional Change | 45° |
| Piping Configuration | Angled DWV Transition |
| Primary Function | Provide a 45-Degree Change in Direction Within Compatible PVC DWV Piping |
45° Elbow Design
The 45-degree elbow configuration provides an angled directional transition within compatible PVC DWV piping. Its two hub openings allow appropriately sized pipe sections to connect directly to the fitting.
The elbow orientation should be established before permanent joining so both openings correspond with the intended piping route. Planning the position helps coordinate adjoining pipe, nearby fittings, support, and available working clearance.
Hub Connections
The hub connections receive appropriately sized compatible PVC DWV pipe at both ends of the elbow. Both openings should be matched to the intended pipe before permanent assembly.
The mating pipe and hub surfaces should be prepared using the appropriate PVC DWV joining procedure. Proper insertion, compatible joining materials, correct elbow orientation, and careful alignment help establish the connections without unnecessary stress on the fitting.
PVC DWV Integration
The PVC DWV construction allows the elbow to integrate into compatible drain, waste, and vent piping arrangements requiring an angled directional transition. Matching the nominal size and hub interfaces to the adjoining PVC pipe helps maintain the intended piping configuration.
Application suitability should be evaluated using the requirements of the complete DWV system. Adjoining materials, connection compatibility, joining materials, piping support, slope where applicable, and local installation requirements should all be considered during fitting selection.
45° Directional Transition
A PVC DWV 45 Degree Elbow provides a compact method of redirecting compatible piping through a 45-degree turn. The H x H arrangement allows compatible PVC DWV pipe to enter both openings of the fitting.
Installation planning should consider elbow orientation, adjoining pipe alignment, nearby components, available clearance, and piping support. Connected piping should align naturally without forcing the fitting into position.
Installation & Selection Considerations
- Confirm the nominal size.
- Verify the H x H arrangement.
- Check PVC DWV compatibility.
- Confirm the required 45° orientation.
- Align adjoining pipe before assembly.
Our PVC fitting specialists can help review your nominal size, DWV requirements, H x H configuration, adjoining PVC pipe, required 45-degree orientation, joining requirements, piping alignment, support requirements, and available installation clearance before you order.
Frequently Asked Questions
What is a PVC DWV 45 Degree Elbow used for?
It provides a 45-degree change in direction within compatible PVC DWV piping.
What does H x H mean?
It identifies hub connections at both ends of the fitting.
What connects to the hub openings?
The hub openings receive appropriately sized compatible PVC DWV pipe.
What directional change does this elbow provide?
The fitting provides a 45-degree change in the piping direction.
Does elbow orientation matter?
Yes. The elbow should be positioned so the 45-degree transition corresponds with the intended piping route.
What should I confirm before ordering?
Confirm the nominal size, H x H arrangement, PVC DWV compatibility, and required elbow orientation.
Important Ordering & Installation Notes
- Inspect both hubs before use.
- Confirm the nominal connection size.
- Verify the H x H arrangement.
- Prepare adjoining pipe correctly.
- Set the elbow orientation before assembly.
