Spears
PVC DWV 90 Degree Vent Elbow (H x H)
- SKU:
- P331
- Availability:
- Usually Ships Same Day
- Weight:
- 0.00 LBS
Description
PVC DWV 90 Degree Vent Elbow (H x H)
PVC DWV 90 Degree Vent Elbow (H x H) provides a 90-degree directional change for compatible PVC drain, waste, and vent piping systems. The vent-elbow configuration uses hub connections on both ends for straightforward integration into compatible PVC DWV vent piping.
The Hub x Hub (H x H) design allows both ends of the elbow to receive compatible PVC pipe or properly sized spigot connections. Its compact 90-degree configuration is suited for vent piping layouts where a right-angle directional change is required.
Product Highlights
- PVC construction
- 90-degree angle
- Vent elbow design
- Hub x hub connections
- Designed for PVC DWV service
- Provides a right-angle vent transition
- Uses compatible solvent-weld connections
- Supports directional changes in compatible DWV vent piping layouts
Technical Specifications
| Product Type | DWV 90 Degree Vent Elbow |
|---|---|
| Material | PVC |
| System Type | Drain, Waste & Vent (DWV) |
| Angle | 90 Degrees |
| Elbow Style | Vent Elbow |
| Connection | Hub x Hub (H x H) |
| Hub Ends | Designed to Receive Compatible PVC Pipe or Spigot Connections |
| Joining Method | Solvent Weld |
| Application | Compatible PVC DWV Vent Piping |
| Primary Function | 90-Degree Directional Change in Compatible PVC DWV Vent Piping |
90-Degree Directional Change
The 90-degree configuration redirects compatible PVC DWV vent piping through a right-angle turn. This allows the vent piping route to change direction where required by the planned system layout.
Confirm the required elbow orientation and available installation space before assembly so the adjoining piping aligns correctly with both hub connections.
Vent Elbow Configuration
The vent elbow design provides a compact directional fitting for compatible PVC DWV vent piping. It combines the required 90-degree turn and two hub connections within a single fitting.
Verify that a vent-style elbow is appropriate for the intended location and piping arrangement before installation.
Hub x Hub Connections
The H x H configuration incorporates hub connections at both ends of the elbow. Each hub is designed to receive compatible PVC pipe or a properly sized spigot connection for solvent-weld assembly.
Confirm the nominal fitting size and properly prepare both compatible PVC mating surfaces before completing the solvent-weld connections.
PVC DWV Vent Applications
This elbow is intended for compatible PVC drain, waste, and vent systems where a 90-degree directional change is required in the vent piping configuration.
Before installation, verify the nominal size, H x H connections, vent application, fitting orientation, available clearance, and compatibility with the adjoining PVC DWV piping.
Installation & Selection Considerations
- Confirm the required size.
- Verify the 90-degree angle.
- Confirm both hub connections.
- Use proper PVC solvent-welding procedures.
- Verify suitability for the planned vent piping layout.
Our PVC DWV fitting specialists can help review your pipe size, 90-degree directional change, H x H connections, vent piping application, fitting orientation, installation requirements, and overall DWV system configuration before you order.
Frequently Asked Questions
What is a PVC DWV 90 Degree Vent Elbow used for?
It is used to provide a 90-degree directional change in compatible PVC DWV vent piping.
What does H x H mean?
H x H means Hub x Hub. The elbow provides hub connections at both ends.
How much does this elbow change direction?
The fitting changes the direction of the compatible vent piping by 90 degrees.
What connects to the hub ends?
The hub ends are designed to receive compatible PVC pipe or properly sized spigot connections.
How are the hub connections assembled?
Compatible PVC mating surfaces are prepared and joined using the appropriate PVC solvent-welding procedures and joining products.
Is this fitting intended for DWV systems?
Yes. This fitting is designed for compatible PVC drain, waste, and vent piping, specifically for a vent-elbow application.
Can this fitting be used for pressure piping?
This fitting is intended for DWV service. For pressure piping, select a fitting specifically designed and rated for the required pressure application.
What should I confirm before ordering?
Confirm the nominal size, 90-degree angle, H x H connection configuration, vent application, fitting orientation, and compatibility with the planned PVC DWV system.
Important Ordering & Installation Notes
- Confirm the fitting size.
- Verify the 90-degree angle.
- Check the fitting orientation.
- Confirm both hub connections.
- Follow applicable DWV vent installation requirements.
