Spears
PVC DWV 22.5 Degree Street Elbow (S x H)
- SKU:
- P326
- Availability:
- Usually Ships Same Day
- Weight:
- 0.00 LBS
Description
PVC DWV 22.5 Degree Street Elbow (S x H)
PVC DWV 22.5 Degree Street Elbow (S x H) provides a gradual 22.5-degree directional transition within compatible PVC drain, waste, and vent piping. The street elbow configuration combines a spigot connection with a hub connection to connect compatible PVC DWV components within a compact fitting arrangement.
The S x H 22.5 degree street elbow configuration combines two different connection interfaces within one PVC DWV fitting. Selection should account for nominal size, spigot and hub compatibility, adjoining components, elbow orientation, joining requirements, piping alignment, support, and available installation clearance.
Product Highlights
- PVC construction
- DWV fitting design
- Street elbow configuration
- 22.5° directional transition
- Spigot x hub connections
- Provides a gradual piping transition
- Connects compatible PVC DWV components
- Combines spigot and hub interfaces within a 22.5-degree fitting
Technical Specifications
| Product Type | Street Elbow |
|---|---|
| Material | PVC |
| System Type | DWV |
| Connection | Spigot x Hub (S x H) |
| Connection Count | Two |
| Fitting Configuration | 22.5° Street Elbow |
| Spigot Interface | Compatible Receiving Hub |
| Hub Interface | Compatible PVC DWV Pipe |
| Connection Style | Spigot x Hub |
| Joining Method | Compatible PVC DWV Joining Procedure |
| Directional Change | 22.5° |
| Primary Function | Provide a 22.5-Degree Change in Direction Within Compatible PVC DWV Piping |
Street Elbow Design
The street elbow configuration provides a gradual 22.5-degree directional transition while incorporating a spigot connection on one end. This allows the fitting to connect directly into a compatible receiving hub while redirecting the adjoining DWV piping.
The elbow orientation should be established before permanent joining so both connections correspond with the intended piping route. Planning the position helps coordinate adjoining components, nearby fittings, support, and available working clearance.
Spigot & Hub Connections
The spigot connection fits into an appropriately sized compatible receiving hub, while the hub connection receives compatible PVC DWV pipe. Each connection should be matched to the intended adjoining component before assembly.
The mating surfaces should be prepared using the appropriate PVC DWV joining procedure. Proper insertion, compatible joining materials, correct elbow orientation, and careful alignment help establish the connections without unnecessary stress on the fitting.
PVC DWV Integration
The PVC DWV construction allows the street elbow to integrate into compatible drain, waste, and vent piping arrangements requiring a gradual directional transition. Matching the nominal size and S x H connection interfaces to the adjoining components helps maintain the intended piping configuration.
Application suitability should be evaluated using the requirements of the complete DWV system. Adjoining materials, connection compatibility, joining materials, piping support, slope where applicable, and local installation requirements should all be considered during fitting selection.
22.5° Directional Transition
A PVC DWV 22.5 Degree Street Elbow combines a gradual directional adjustment with a street-style spigot connection. This arrangement can reduce the additional space required for a separate section of pipe between compatible fittings.
Installation planning should consider spigot engagement, elbow orientation, adjoining component alignment, nearby fittings, available clearance, and piping support. Connected components should align naturally without forcing the fitting into position.
Installation & Selection Considerations
- Confirm the nominal size.
- Verify the S x H arrangement.
- Check PVC DWV compatibility.
- Confirm the required 22.5° orientation.
- Align adjoining components before assembly.
Our PVC fitting specialists can help review your nominal size, DWV requirements, S x H configuration, adjoining PVC components, required 22.5-degree orientation, joining requirements, piping alignment, support requirements, and available installation clearance before you order.
Frequently Asked Questions
What is a PVC DWV 22.5 Degree Street Elbow used for?
It provides a gradual 22.5-degree change in direction within compatible PVC DWV piping.
What does S x H mean?
It identifies a spigot connection at one end and a hub connection at the other.
What connects to the spigot end?
The spigot end fits into an appropriately sized compatible receiving hub.
What connects to the hub end?
The hub end receives appropriately sized compatible PVC DWV pipe.
Does elbow orientation matter?
Yes. The elbow should be positioned so the 22.5-degree transition corresponds with the intended piping route.
What should I confirm before ordering?
Confirm the nominal size, S x H arrangement, PVC DWV compatibility, and required elbow orientation.
Important Ordering & Installation Notes
- Inspect both connections before use.
- Confirm the nominal connection size.
- Verify the S x H arrangement.
- Prepare adjoining components correctly.
- Set the elbow orientation before assembly.
