Empire Industries
Fig. 159 Adjustable Rod Beam Clamp
- SKU:
- Fig. 159
- Availability:
- Usually Ships Same Day
- Weight:
- 0.00 LBS
Description
Fig. 159 Adjustable Rod Beam Clamp
Empire Fig. 159 Adjustable Rod Beam Clamp is designed for the suspension of a hanger rod from an I-beam.
The clamp is recommended for I-beam flange widths from 4" minimum to 8" maximum and is available in plain carbon steel and electro-galvanized finishes.
Product Highlights
- Designed for suspension of a hanger rod from an I-beam
- Recommended for flange widths from 4" minimum to 8" maximum
- Available in plain carbon steel and electro-galvanized finishes
- Rod sizes available from 3/8"-16 through 3/4"-10
- Maximum recommended loads range from 300 to 1,800 lbs., depending on rod size
- Specify figure number, finish and rod size when ordering
Rod Size & Load Data
| Rod Size | Material Size | Flange Width | Weight Each | Max. Recommended Load |
|---|---|---|---|---|
| 3/8"-16* | 3 ga. x 1-1/4" | 3-1/2" to 8" | 0.97 lbs. | 300 lbs. |
| 1/2"-13 | 3 ga. x 1-1/2" | 3-1/2" to 8" | 1.37 lbs. | 700 lbs. |
| 5/8"-11 | 3 ga. x 1-3/4" | 3-1/2" to 8" | 1.84 lbs. | 1,000 lbs. |
| 3/4"-10 | 3/8" x 2-1/2" | 3-1/2" to 8" | 6.78 lbs. | 1,800 lbs. |
*The 3/8"-16 size is not available in plain carbon steel.
Technical Specifications
| Manufacturer | Empire Industries |
|---|---|
| Figure | 159 |
| Product Type | Adjustable Rod Beam Clamp |
| Service | Suspension of a Hanger Rod from an I-Beam |
| Recommended Flange Width | 4" Minimum to 8" Maximum |
| Available Finishes | Plain Carbon Steel (159B) and Electro-Galvanized (159G) |
| Rod Sizes | 3/8"-16, 1/2"-13, 5/8"-11 and 3/4"-10 |
| Maximum Recommended Load | 300 to 1,800 lbs., depending on rod size |
I-Beam Application
The Fig. 159 is designed to suspend a hanger rod from an I-beam. Empire recommends the clamp for flange widths from 4" minimum through 8" maximum.
Available Finishes
- 159B: Plain Carbon Steel
- 159G: Electro-Galvanized
The 3/8"-16 rod size is not available in plain carbon steel.
Standards & Approvals
The manufacturer submittal lists compliance with:
- Federal Specification WW-H-171-E, Type 54
- Federal Specification A-A-1192A, Type 27
- MSS SP-58, Type 27
- MSS SP-69, Type 27
Important Ordering Notes
Specify the figure number, finish and rod size when ordering. Confirm the required I-beam flange width, rod size and load requirement before selection. The 3/8"-16 size is not available in plain carbon steel.
Product Documents
Product Questions
What is the Fig. 159 Adjustable Rod Beam Clamp used for?
It is designed for the suspension of a hanger rod from an I-beam.
What flange widths are recommended?
Empire recommends the Fig. 159 for I-beam flange widths from 4" minimum to 8" maximum.
What rod sizes are available?
The manufacturer submittal lists 3/8"-16, 1/2"-13, 5/8"-11 and 3/4"-10 rod sizes.
What finishes are available?
The Fig. 159 is available in plain carbon steel (159B) and electro-galvanized (159G). The 3/8"-16 size is not available in plain carbon steel.
What is the maximum recommended load?
The maximum recommended load depends on rod size and ranges from 300 lbs. for the 3/8"-16 size to 1,800 lbs. for the 3/4"-10 size.
What information should be specified when ordering?
Specify the figure number, finish and rod size.
Ask Willy: Product Information & Help
Contact the GetPipe.com team for help with Fig. 159 Adjustable Rod Beam Clamp.
