Lesso America
PVC SDR 35 1/4 Bend Street 90° (SPG x HUB)
- SKU:
- LSW302
- Availability:
- Usually Ships Same Day
- Weight:
- 0.00 LBS
Description
PVC SDR 35 1/4 Bend Street 90° (SPG x Hub)
PVC SDR 35 Street 1/4 Bends provide a compact 90-degree directional change in gravity-flow, non-pressure sewer and drainage piping systems.
Featuring a spigot (SPG) connection on one end and a hub connection on the other, this street bend is designed to simplify directional changes within compatible SDR 35 PVC piping systems. The spigot end fits directly into a compatible hub fitting, while the hub end accepts SDR 35 PVC pipe. This configuration can reduce the need for an additional coupling and helps create a compact fitting-to-fitting connection. Constructed from durable PVC, the bend offers resistance to corrosion, moisture, soil exposure, and many compatible chemicals for dependable use in sanitary sewer, stormwater, wastewater, and underground drainage applications.
Product Highlights
- PVC SDR 35 street 1/4 bend
- 90-degree directional change
- Spigot x Hub connection configuration
- Compact street-fitting design
- Spigot end fits into a compatible SDR 35 hub
- Hub end accepts compatible SDR 35 PVC pipe
- Can reduce the need for an additional coupling
- Useful for direct fitting-to-fitting connections
- Designed for gravity-flow sewer and drainage systems
- Suitable for non-pressure applications
- Designed for solvent-weld installation
- Helps maintain secure, leak-resistant joints
- Durable PVC construction
- Lightweight for easier handling and installation
- Resistant to corrosion
- Resistant to moisture exposure
- Suitable for underground installations
- Suitable for sanitary sewer systems
- Suitable for stormwater drainage
- Suitable for wastewater piping
- Suitable for residential, commercial, and municipal systems
Technical Specifications
| Product Type | PVC SDR 35 Street 1/4 Bend |
|---|---|
| Material | PVC |
| Bend Angle | 90° |
| Connection Type | Spigot (SPG) x Hub |
| First Connection | Spigot |
| Second Connection | Hub |
| Pipe Compatibility | Compatible SDR 35 PVC Sewer Pipe and Fittings |
| Joint Method | Solvent Weld |
| System Type | Sewer and Drainage |
| Flow Type | Gravity Flow |
| Pressure Service | Non-Pressure |
| Primary Function | Create a Compact 90-Degree Directional Change in SDR 35 PVC Piping |
| Typical Applications | Sanitary Sewer, Stormwater, Wastewater, Underground Drainage, Residential, Commercial, and Municipal Systems |
Connection Configuration
Spigot Connection
The spigot end is designed to fit directly into a compatible SDR 35 hub or fitting for solvent-weld installation.
Hub Connection
The opposite hub accepts compatible SDR 35 PVC pipe, completing the 90-degree directional change.
Street Bend Design
The street configuration combines a spigot and hub into a single 90-degree fitting.
Because the spigot end can insert directly into another compatible hub fitting, the bend can create a tighter and more compact assembly than a standard Hub x Hub bend paired with a separate coupling.
This makes the fitting useful where installation space is limited or where a direct fitting-to-fitting directional change is preferred.
Why Choose a Street 1/4 Bend?
Compact Installation
- Provides a 90-degree directional change
- Spigot end fits directly into a hub
- Can eliminate an extra coupling
- Useful in space-limited layouts
- Supports fitting-to-fitting connections
PVC Construction
- Corrosion resistant
- Lightweight construction
- Suitable for underground service
- Resistant to moisture exposure
- Suitable for many compatible drainage environments
Typical Applications
Sewer Systems
- Sanitary sewer piping
- Building sewer connections
- Residential sewer lines
- Commercial sewer systems
- Municipal sewer installations
Drainage Systems
- Stormwater drainage
- Wastewater piping
- Underground drainage
- Gravity-flow drain systems
- Compact directional changes
Construction Details
Manufactured from durable PVC, this street 1/4 bend is designed for long-term use in underground sewer and drainage environments.
The material provides resistance to corrosion, moisture, soil conditions, and many compatible chemicals while remaining lightweight for easier handling and installation.
Precision-molded spigot and hub connections help provide proper fit and alignment with compatible SDR 35 PVC pipe and fittings.
Installation
Verify the nominal fitting size and confirm compatibility with the SDR 35 PVC pipe and fitting being connected.
Confirm that the spigot end matches the intended hub and that the hub end matches the intended SDR 35 pipe size.
Plan the piping layout carefully and verify that a 90-degree street bend is appropriate for the intended drainage path and applicable code requirements.
Cut the mating SDR 35 pipe square and remove burrs, dirt, and debris that could interfere with proper insertion.
Clean and prepare the spigot, mating hub, pipe end, and bend hub according to accepted PVC solvent-weld installation procedures.
Dry-fit both sides before applying primer or solvent cement to confirm insertion depth, orientation, available clearance, and alignment.
Apply approved PVC primer and solvent cement as required and fully seat the spigot into the mating hub and the SDR 35 pipe into the bend hub.
Maintain proper pipe alignment and drainage slope while the joints set.
Allow completed solvent-weld joints to cure according to the solvent cement manufacturer's recommendations before backfilling or placing the system into service.
Our piping specialists can help review your SDR 35 pipe size, mating hub, required bend angle, and sewer or drainage layout before you order.
Email the GetPipe.com Team Visit Quick SupportFrequently Asked Questions
What is a PVC SDR 35 Street 1/4 Bend used for?
It is used to create a 90-degree directional change in compatible SDR 35 PVC sewer or drainage piping while allowing one end of the fitting to insert directly into another hub.
What does SPG x Hub mean?
It means one end is a spigot connection that fits into a compatible hub, while the opposite end is a hub designed to receive compatible SDR 35 PVC pipe.
What does SPG mean?
SPG means spigot. The spigot end fits inside a compatible hub rather than receiving pipe itself.
Why is this called a street bend?
A street fitting has a spigot-style end that can connect directly into another compatible hub fitting, helping create a more compact assembly.
How is this different from a Hub x Hub 1/4 bend?
A Hub x Hub bend receives pipe at both ends. This street bend has a spigot end that can insert directly into a compatible fitting hub, which may eliminate the need for an extra coupling.
Why is a 90-degree fitting called a 1/4 bend?
A 90-degree bend represents one-quarter of a full 360-degree circle.
How is the fitting installed?
The spigot-to-hub and pipe-to-hub connections are intended for compatible PVC solvent-weld installation.
Can the spigot connect directly to another SDR 35 fitting?
Yes. The supplied product information identifies the spigot end as designed to fit directly into a compatible SDR 35 hub fitting.
Is this fitting intended for pressure service?
No. The supplied product information identifies it for non-pressure sewer and drainage systems.
Can it be installed underground?
Yes. Underground sanitary sewer, stormwater, wastewater, and drainage systems are identified as suitable applications.
Can it be used where installation space is limited?
Yes. The street configuration can create a more compact fitting assembly by allowing the spigot end to connect directly into another hub.
What should I verify before ordering?
Confirm the nominal SDR 35 size, mating hub size, 90-degree bend requirement, spigot and hub configuration, and compatibility with the intended sewer or drainage system.
Important Ordering & Installation Notes
- This listing is for a PVC SDR 35 1/4 Bend Street 90°.
- Connection configuration is SPG x Hub.
- SPG means Spigot.
- Verify the nominal fitting size before ordering.
- Confirm compatibility with the specific SDR 35 PVC pipe and mating fitting.
- The spigot end is designed to fit into a compatible SDR 35 hub.
- The hub end is designed to receive compatible SDR 35 PVC pipe.
- This fitting creates a fixed 90-degree directional change.
- The street configuration can provide a more compact fitting-to-fitting connection.
- The spigot end may eliminate the need for an additional coupling in certain layouts.
- Confirm that a 90-degree bend is appropriate for the intended drainage layout.
- Verify applicable code requirements for the planned directional change.
- Both connections are intended for solvent-weld installation.
- Dry-fit both sides before applying primer or solvent cement.
- Confirm insertion depth, orientation, clearance, and alignment before final assembly.
- Cut the mating SDR 35 pipe square.
- Remove burrs, dirt, and debris from all mating surfaces.
- Clean and prepare all mating surfaces before solvent welding.
- Use approved PVC primer and solvent cement according to manufacturer instructions.
- Fully seat the spigot into the correct mating hub.
- Fully seat the SDR 35 pipe into the bend hub.
- Maintain proper pipe alignment and drainage slope while the joints set.
- Allow completed solvent-weld joints to cure according to the cement manufacturer's recommendations before service or backfilling.
- This fitting is intended for non-pressure sewer and drainage applications.
- Suitable applications may include sanitary sewer, stormwater, wastewater, and underground drainage systems.
- Consult manufacturer documentation for complete dimensions and bend geometry.
- Consult manufacturer documentation for installation and operating limitations.
- Follow applicable plumbing, sewer, stormwater, and drainage codes.
