Lesso America
PVC SDR 35 1/4 Bend 90° Long Sweep Street (SPG x HUB)
- SKU:
- LSW309
- Availability:
- Usually Ships Same Day
- Weight:
- 0.00 LBS
Description
PVC SDR 35 1/4 Bend 90° Long Sweep Street (SPG x Hub)
PVC SDR 35 1/4 Bend 90° Long Sweep Street fittings provide a gradual 90-degree directional change while allowing a compact fitting-to-fitting connection in non-pressure sewer and drainage systems.
Featuring a spigot (SPG) connection on one end and a hub connection on the other, this long sweep street bend is designed to redirect compatible SDR 35 PVC piping with a broader turning radius than a standard 90-degree street bend. The spigot end can fit directly into a compatible hub fitting, while the opposite hub accepts SDR 35 PVC pipe. This combination helps simplify installation while supporting smoother gravity-flow movement through sanitary sewer, stormwater, wastewater, and underground drainage systems.
Product Highlights
- PVC SDR 35 long sweep street 1/4 bend
- 90-degree directional change
- Long sweep configuration
- Spigot x Hub connection design
- Provides a broader-radius turn than a standard street bend
- Spigot end fits directly into a compatible SDR 35 hub
- Hub end accepts compatible SDR 35 PVC pipe
- Can reduce the need for an additional coupling
- Useful for direct fitting-to-fitting connections
- Supports smoother gravity-flow transitions
- Designed for sewer and drainage systems
- Suitable for non-pressure applications
- Designed for solvent-weld installation
- Durable PVC construction
- Lightweight for easier handling and installation
- Resistant to corrosion
- Resistant to moisture exposure
- Suitable for underground installations
- Suitable for sanitary sewer systems
- Suitable for stormwater drainage
- Suitable for wastewater piping
- Suitable for residential, commercial, and municipal systems
Technical Specifications
| Product Type | PVC SDR 35 1/4 Bend 90° Long Sweep Street |
|---|---|
| Material | PVC |
| Bend Angle | 90° |
| Bend Style | Long Sweep Street |
| Connection Type | Spigot (SPG) x Hub |
| First Connection | Spigot |
| Second Connection | Hub |
| Pipe Compatibility | Compatible SDR 35 PVC Sewer Pipe and Fittings |
| Joint Method | Solvent Weld |
| System Type | Sewer and Drainage |
| Flow Type | Gravity Flow |
| Pressure Service | Non-Pressure |
| Primary Function | Create a Gradual 90-Degree Directional Change with a Direct Spigot-to-Hub Connection |
| Typical Applications | Sanitary Sewer, Stormwater, Wastewater, Underground Drainage, Residential, Commercial, and Municipal Systems |
Connection Configuration
Spigot Connection
The spigot end is designed to fit directly into a compatible SDR 35 hub or fitting for solvent-weld installation.
Hub Connection
The opposite hub accepts compatible SDR 35 PVC pipe, completing the gradual 90-degree turn.
Long Sweep Street Design
This fitting combines two useful features in one component: a long sweep bend radius and a street-style spigot connection.
The long sweep geometry creates a more gradual change in direction than a compact 90-degree bend, while the spigot end allows the fitting to connect directly into another compatible hub.
This configuration can help reduce fitting count, simplify tight layouts, and support smoother flow through gravity drainage systems.
Why Choose a Long Sweep Street Bend?
Smoother Flow Path
- Provides a gradual 90-degree turn
- Broader bend radius than a standard street bend
- Helps reduce abrupt flow changes
- Supports efficient gravity drainage
- Useful in sewer and wastewater routing
Compact Street Connection
- Spigot end fits directly into a compatible hub
- Can eliminate an extra coupling
- Useful for fitting-to-fitting connections
- Helps reduce assembly length in some layouts
- Combines compact connection with long sweep geometry
Typical Applications
Sewer Systems
- Sanitary sewer piping
- Building sewer connections
- Residential sewer lines
- Commercial sewer systems
- Municipal sewer installations
Drainage Systems
- Stormwater drainage
- Wastewater piping
- Underground drainage
- Gravity-flow drain systems
- Gradual directional changes in buried pipe runs
Construction Details
Manufactured from durable PVC, this long sweep street bend is designed for long-term use in underground sewer and drainage environments.
The material provides resistance to corrosion, moisture, soil conditions, and many compatible chemicals while remaining lightweight for easier handling during installation.
The molded spigot and hub connections help provide proper fit with compatible SDR 35 fittings and pipe, while the broader sweep radius supports a smoother transition through the bend.
Installation
Verify the nominal fitting size and confirm compatibility with the SDR 35 PVC pipe and mating hub fitting.
Confirm that the spigot end matches the intended hub and that the hub end matches the intended SDR 35 pipe size.
Review the available installation space and verify that the long sweep radius can be accommodated within the trench or piping layout.
Plan the directional change carefully and confirm that a 90-degree long sweep street bend is appropriate for the intended drainage application and applicable code requirements.
Cut the mating SDR 35 pipe square and remove burrs, dirt, and debris that could interfere with proper insertion.
Clean and prepare the spigot, mating hub, pipe end, and bend hub according to accepted PVC solvent-weld installation procedures.
Dry-fit both sides before applying primer or solvent cement to confirm insertion depth, sweep clearance, orientation, and alignment.
Apply approved PVC primer and solvent cement as required and fully seat the spigot into the mating hub and the SDR 35 pipe into the bend hub.
Maintain proper pipe alignment and drainage slope while the joints set.
Allow completed solvent-weld joints to cure according to the solvent cement manufacturer's recommendations before backfilling or placing the system into service.
Our piping specialists can help review your SDR 35 pipe size, mating hub, required sweep radius, available clearance, and sewer or drainage application before you order.
Email the GetPipe.com Team Visit Quick SupportFrequently Asked Questions
What is a PVC SDR 35 1/4 Bend 90° Long Sweep Street used for?
It is used to create a gradual 90-degree directional change in compatible SDR 35 sewer or drainage piping while allowing one end of the fitting to connect directly into another hub.
What does SPG x Hub mean?
It means one end is a spigot connection that fits into a compatible hub, while the opposite end is a hub that receives compatible SDR 35 PVC pipe.
What does SPG mean?
SPG means spigot. The spigot end fits inside a compatible hub instead of receiving pipe.
Why is this called a street bend?
A street fitting includes a spigot-style end that can fit directly into another compatible hub fitting.
What does Long Sweep mean?
Long sweep refers to the broader bend radius, which provides a more gradual 90-degree directional change than a compact bend.
How is this different from a standard Street 1/4 Bend?
Both use a Spigot x Hub connection and create a 90-degree turn, but the long sweep version has a broader radius for a more gradual change in direction.
How is this different from a Hub x Hub Long Sweep?
A Hub x Hub long sweep receives pipe at both ends. This street version has a spigot end that can connect directly into a compatible hub fitting.
Can the spigot connect directly to another SDR 35 fitting?
Yes. The supplied product information identifies the spigot end as designed for direct connection into compatible SDR 35 hubs.
Does the long sweep require more installation space?
Yes. The broader bend radius generally requires more clearance than a compact 90-degree street bend.
Is this fitting intended for pressure service?
No. The supplied product information identifies it for non-pressure sewer and drainage systems.
Can it be used underground?
Yes. Underground sanitary sewer, stormwater, wastewater, and drainage systems are suitable applications.
What should I verify before ordering?
Confirm the nominal SDR 35 size, mating hub size, 90-degree bend requirement, long sweep clearance, Spigot x Hub configuration, and compatibility with the intended drainage system.
Important Ordering & Installation Notes
- This listing is for a PVC SDR 35 1/4 Bend 90° Long Sweep Street.
- Connection configuration is SPG x Hub.
- SPG means Spigot.
- Verify the nominal fitting size before ordering.
- Confirm compatibility with the specific SDR 35 PVC pipe and mating hub fitting.
- The spigot end is designed to fit into a compatible SDR 35 hub.
- The hub end is designed to receive compatible SDR 35 PVC pipe.
- This fitting creates a fixed 90-degree directional change.
- The long sweep design provides a broader turn than a standard street bend.
- The street configuration can provide a direct fitting-to-fitting connection.
- The spigot end may eliminate the need for an additional coupling in some layouts.
- Confirm adequate installation space for the extended sweep radius.
- Verify fitting dimensions before finalizing the trench or piping layout.
- Confirm that the 90-degree directional change is appropriate for the intended drainage application.
- Verify applicable code requirements for the planned installation.
- Both connections are intended for solvent-weld installation.
- Dry-fit both sides before applying primer or solvent cement.
- Confirm insertion depth, orientation, sweep clearance, and alignment before final assembly.
- Cut the mating SDR 35 pipe square.
- Remove burrs, dirt, and debris from all mating surfaces.
- Clean and prepare all mating surfaces before solvent welding.
- Use approved PVC primer and solvent cement according to manufacturer instructions.
- Fully seat the spigot into the correct mating hub.
- Fully seat the SDR 35 pipe into the bend hub.
- Maintain proper pipe alignment and drainage slope while the joints set.
- Allow completed solvent-weld joints to cure according to the cement manufacturer's recommendations before service or backfilling.
- This fitting is intended for non-pressure sewer and drainage applications.
- Suitable applications may include sanitary sewer, stormwater, wastewater, and underground drainage systems.
- Consult manufacturer documentation for complete dimensions and sweep geometry.
- Consult manufacturer documentation for installation and operating limitations.
- Follow applicable plumbing, sewer, stormwater, and drainage codes.
