Lesso America
PVC DWV 1/4 Bend Street 90 Elbow (SPG x HUB)
- SKU:
- LP302
- Availability:
- Usually Ships Same Day
- Weight:
- 0.00 LBS
Description
PVC DWV 1/4 Bend Street 90° Elbow (SPG x HUB)
PVC DWV 1/4 Bend Street 90° Elbows provide a compact 90-degree directional change in non-pressurized drain, waste, and vent piping systems.
Featuring a spigot (SPG) connection on one end and a hub connection on the other, this street elbow can install directly into a compatible hub fitting while accepting PVC DWV pipe or another compatible fitting on the opposite side. The configuration helps reduce the need for additional couplings while providing a secure solvent-welded transition in residential, commercial, and industrial DWV systems.
Product Highlights
- PVC DWV 1/4 bend street 90° elbow
- Spigot (SPG) x Hub connection configuration
- Creates a 90° directional change
- Compact street-elbow design
- Spigot end fits directly into a compatible hub fitting
- Hub end accepts compatible PVC DWV pipe or fitting
- Helps reduce the need for additional couplings
- Designed for non-pressurized drain, waste, and vent systems
- Solvent-weld installation
- Durable corrosion-resistant PVC construction
- Suitable for residential, commercial, and industrial DWV systems
Technical Specifications
| Product Type | DWV Street 1/4 Bend Elbow |
|---|---|
| Material | PVC |
| Bend Angle | 90° |
| Connection Type | Spigot (SPG) x Hub |
| Joint Method | Solvent Weld |
| System Type | Drain, Waste & Vent (DWV) |
| Pressure Service | Non-Pressure |
| Primary Function | Compact 90° Directional Change |
| Typical Applications | Residential, Commercial, and Industrial DWV Systems |
Connection Configuration
Spigot End
The SPG end is designed to fit directly into a compatible PVC hub fitting for a compact solvent-weld connection.
90° Street Bend
The street-elbow body changes the direction of the DWV piping system by 90 degrees while minimizing the number of fittings required.
Hub End
The opposite hub accepts compatible PVC DWV pipe or another compatible spigot-style fitting.
Construction Details
The elbow is manufactured from durable PVC for corrosion resistance and dependable long-term service in compatible non-pressure drain, waste, and vent systems.
The spigot end installs directly into a compatible hub, while the opposite hub accepts the outgoing PVC DWV connection, creating a compact street-style fitting arrangement.
This configuration can help simplify piping layouts by reducing the need for an additional coupling or short section between fittings.
Why Choose a Street 90° Elbow?
Compact Installation
- Spigot end installs directly into a hub
- Reduces the number of fittings required
- Useful where installation space is limited
- Creates a direct 90° directional change
- Suitable for tight DWV layouts
PVC DWV Construction
- Corrosion-resistant material
- Lightweight construction
- Resistant to many common plumbing chemicals
- Designed for solvent-weld assembly
- Suitable for long-term non-pressure service
Typical Applications
Residential DWV Systems
- Drain piping
- Waste piping
- Vent piping
- Fixture drainage systems
- Compact plumbing layouts
Commercial & Industrial DWV
- Building drainage systems
- Commercial waste piping
- Vent system transitions
- Repair and retrofit work
- Compatible industrial drainage systems
Solvent-Weld Installation
Clean and prepare the compatible hub and elbow spigot according to accepted PVC solvent-weld procedures. Apply compatible PVC primer and solvent cement where required and fully seat the spigot into the hub.
Prepare the outgoing PVC DWV pipe or compatible fitting in the same manner and install it into the elbow hub. Confirm the required 90-degree orientation before the solvent cement begins to set.
Allow all completed joints to cure according to the cement manufacturer's recommendations before placing the system into normal service.
Our plumbing specialists can help review your pipe size, hub and spigot connections, DWV layout, and solvent-weld requirements before you order.
Email the GetPipe.com Team Visit Quick SupportFrequently Asked Questions
What is a PVC DWV street 90° elbow?
A street 90° elbow changes the direction of compatible DWV piping by 90 degrees and uses a spigot connection on one end with a hub connection on the other.
What does SPG mean?
SPG means spigot. The spigot end is designed to fit directly into a compatible hub fitting.
What does HUB mean?
Hub refers to the socket connection that accepts compatible PVC pipe or a compatible spigot-style fitting.
How is a street elbow different from a standard 90° elbow?
A standard 90° elbow typically has hubs on both ends, while a street elbow has a spigot on one end and a hub on the other, allowing it to connect directly into another hub fitting.
Why use a street elbow?
The street configuration can save space and reduce the need for an extra coupling or intermediate pipe section.
How is the fitting installed?
Both connections are installed using compatible PVC solvent-weld procedures.
Is this fitting intended for pressure piping?
No. This fitting is intended for non-pressurized drain, waste, and vent systems.
What material is the elbow made from?
The elbow is manufactured from durable, corrosion-resistant PVC.
What angle does the fitting create?
The fitting changes the direction of the piping system by 90 degrees.
What should I verify before ordering?
Confirm the nominal size, Spigot x Hub configuration, 90-degree bend requirement, and compatibility with the intended PVC DWV piping system.
Important Ordering & Installation Notes
- This listing is for a PVC DWV 1/4 Bend Street 90° Elbow with SPG x HUB connections.
- Verify the required nominal size before ordering.
- The fitting creates a 90-degree directional change.
- The spigot end fits into a compatible PVC hub fitting.
- The hub end accepts compatible PVC DWV pipe or fitting.
- The street configuration may reduce the need for additional couplings.
- Designed for non-pressurized drain, waste, and vent applications.
- Use compatible PVC primer and solvent cement where required.
- Clean and prepare all mating surfaces before solvent welding.
- Fully seat the spigot into the mating hub.
- Fully insert the outgoing pipe or fitting into the elbow hub.
- Confirm the required orientation before the solvent cement begins to set.
- Allow completed joints to cure according to the cement manufacturer's recommendations.
- Do not use this fitting for pressure applications.
- Follow applicable plumbing codes and installation requirements.
