Lesso America
PVC DWV 1/8 Bend 45 Street Elbow (HUB x SPG)
- SKU:
- LP323
- Availability:
- Usually Ships Same Day
- Weight:
- 0.00 LBS
Description
PVC DWV 1/8 Bend 45° Street Elbow (HUB x SPG)
PVC DWV 1/8 Bend 45° Street Elbows provide a compact 45-degree directional change for non-pressurized drain, waste, and vent piping systems.
Featuring a hub connection on one end and a spigot (SPG) connection on the other, this fitting allows compatible PVC DWV pipe to connect on one side while the spigot end installs directly into another hub fitting. The street-style configuration helps reduce the need for additional couplings while maintaining a smooth flow path through residential, commercial, and institutional DWV systems.
Product Highlights
- PVC DWV 1/8 bend 45° street elbow
- Provides a 45° directional change
- Hub x Spigot (SPG) connection configuration
- Compact street-style design
- Hub end accepts compatible PVC DWV pipe
- Spigot end fits directly into a compatible hub fitting
- Helps reduce the need for additional couplings
- Designed for non-pressure drain, waste, and vent systems
- Smooth interior supports efficient drainage flow
- Durable corrosion-resistant PVC construction
- Lightweight and easy to install
Technical Specifications
| Product Type | DWV 1/8 Bend Street Elbow |
|---|---|
| Material | PVC |
| Bend Angle | 45° |
| Connection Type | Hub x Spigot (SPG) |
| Joint Method | Solvent Weld |
| System Type | Drain, Waste & Vent (DWV) |
| Pressure Service | Non-Pressure |
| Primary Function | 45° Directional Change / Pipe Alignment |
| Referenced Standards | ASTM D2665, ASTM D1784, CSA B181.2, and Applicable NSF/ANSI Standards |
| Typical Applications | Residential, Commercial, and Institutional DWV Systems |
Connection Configuration
Hub End
The hub connection accepts compatible PVC DWV pipe for a permanent solvent-weld connection.
45° Street Bend
The fitting creates a smooth 45-degree directional transition while maintaining a compact street-elbow profile.
Spigot End
The SPG end is designed to fit directly into a compatible PVC hub fitting, helping reduce the need for an extra coupling.
Construction Details
The fitting is manufactured from durable PVC for resistance to corrosion, chemicals, moisture, and long-term wear in compatible DWV systems.
The hub and spigot configuration supports direct fitting-to-fitting installation while maintaining a secure solvent-welded connection.
The smooth internal bore helps maintain consistent drainage flow and minimizes unnecessary restriction through the 45-degree bend.
Why Choose a 45° Street Elbow?
Smooth Directional Change
- Creates a 45° piping transition
- Provides a gentler turn than a 90° elbow
- Useful for pipe offsets and alignment
- Supports smooth gravity drainage
- Suitable for new installations and repairs
Compact Street Configuration
- Spigot end installs directly into a hub
- Helps reduce additional couplings
- Useful where space is limited
- Simplifies fitting-to-fitting connections
- Maintains permanent solvent-weld joints
Typical Applications
Residential DWV Systems
- Drain piping
- Waste piping
- Vent piping
- Fixture drainage systems
- Pipe offsets and alignment
Commercial & Institutional DWV
- Building drainage systems
- Commercial waste piping
- Vent system routing
- Repair and retrofit work
- Institutional plumbing systems
Solvent-Weld Installation
Clean and prepare all mating PVC surfaces according to accepted solvent-weld procedures. Apply compatible PVC primer and solvent cement where required.
Fully seat compatible PVC DWV pipe into the hub end and insert the spigot end into the mating hub fitting. Confirm the required 45-degree orientation before the solvent cement begins to set.
Allow all completed joints to cure according to the solvent-cement manufacturer's recommendations before placing the system into normal service.
Our plumbing specialists can help review your pipe size, required offset, hub and spigot connections, and DWV layout before you order.
Email the GetPipe.com Team Visit Quick SupportFrequently Asked Questions
What angle is a 1/8 bend?
A 1/8 bend provides a 45-degree directional change.
What does HUB mean?
Hub refers to the socket connection that accepts compatible PVC DWV pipe for solvent-weld installation.
What does SPG mean?
SPG means spigot. The spigot end is designed to fit directly into a compatible hub fitting.
How is a street 45° elbow different from a standard 45° elbow?
A standard 45° elbow typically has hubs on both ends, while a street elbow has a hub on one end and a spigot on the other.
Why use a street-style fitting?
The spigot end can connect directly into another hub fitting, which may eliminate the need for an additional coupling or short pipe section.
How is the fitting installed?
Both the hub and spigot connections are installed using compatible PVC solvent-weld procedures.
Is this fitting intended for pressure piping?
No. This fitting is intended for non-pressure drain, waste, and vent systems.
What standards are referenced for this fitting?
The supplied product information references ASTM D2665, ASTM D1784, CSA B181.2, and applicable NSF/ANSI standards.
What material is the fitting made from?
The elbow is manufactured from durable, corrosion-resistant PVC.
What should I verify before ordering?
Confirm the nominal size, Hub x Spigot configuration, 45-degree bend requirement, and compatibility with the intended PVC DWV system.
Important Ordering & Installation Notes
- This listing is for a PVC DWV 1/8 Bend 45° Street Elbow with HUB x SPG connections.
- The fitting provides a 45-degree directional change.
- Verify the required nominal size before ordering.
- The hub end accepts compatible PVC DWV pipe.
- The spigot end fits directly into a compatible hub fitting.
- The street configuration may reduce the need for additional couplings.
- Designed for non-pressure drain, waste, and vent applications.
- Use compatible PVC primer and solvent cement where required.
- Clean and prepare all mating surfaces before solvent welding.
- Fully seat both connections during assembly.
- Confirm the required 45-degree orientation before the solvent cement begins to set.
- Allow completed joints to cure according to the cement manufacturer's recommendations.
- Do not use this fitting for pressure applications.
- Verify applicable plumbing code and standards requirements before installation.
- Follow manufacturer installation recommendations.
