Lesso America
PVC DWV 1/6 Bend Street (HUB x SPG)
- SKU:
- LP320
- Availability:
- Usually Ships Same Day
- Weight:
- 0.00 LBS
Description
PVC DWV 1/6 Bend Street (HUB x SPG)
PVC DWV 1/6 Bend Street Elbows provide a compact 30-degree directional change for non-pressurized drain, waste, and vent piping systems.
Featuring a hub connection on one end and a spigot (SPG) connection on the other, this street-style fitting accepts compatible PVC DWV pipe while also fitting directly into another hub fitting. The 30-degree bend helps fine-tune pipe alignment, while the street configuration can reduce the need for additional couplings in residential, commercial, and industrial DWV installations.
Product Highlights
- PVC DWV 1/6 bend street elbow
- Provides a 30° directional change
- Hub x Spigot (SPG) connection configuration
- Compact street-style design
- Hub end accepts compatible PVC DWV pipe
- Spigot end fits directly into a compatible hub fitting
- Helps reduce the need for additional couplings
- Designed for non-pressurized drain, waste, and vent systems
- Solvent-weld installation
- Durable corrosion-resistant PVC construction
- Suitable for residential, commercial, and industrial DWV systems
Technical Specifications
| Product Type | DWV 1/6 Bend Street Elbow |
|---|---|
| Material | PVC |
| Bend Angle | 30° |
| Connection Type | Hub x Spigot (SPG) |
| Joint Method | Solvent Weld |
| System Type | Drain, Waste & Vent (DWV) |
| Pressure Service | Non-Pressure |
| Primary Function | 30° Directional Change / Pipe Alignment |
| Typical Applications | Residential, Commercial, and Industrial DWV Systems |
Connection Configuration
Hub End
The hub connection accepts compatible PVC DWV pipe for a permanent solvent-weld joint.
30° Street Bend
The 1/6 bend creates a gentle 30-degree directional adjustment while the street-style body helps keep the installation compact.
Spigot End
The SPG end is designed to fit directly into a compatible hub fitting, helping reduce the need for an extra coupling.
Construction Details
The fitting is manufactured from durable PVC for corrosion resistance and dependable long-term service in compatible non-pressure drain, waste, and vent systems.
The hub end accepts compatible PVC DWV pipe while the spigot end installs directly into another hub, creating a compact fitting-to-fitting connection.
The 30-degree bend helps make smaller directional adjustments while maintaining a smooth flow path through the DWV system.
Why Choose a 1/6 Bend Street Elbow?
Precise Directional Adjustment
- Creates a 30° directional change
- Useful for pipe offsets
- Helps fine-tune DWV layouts
- Provides a gentler turn than 45° or 90° fittings
- Suitable for new installations and repairs
Compact Street Configuration
- Spigot end fits directly into a hub
- Helps reduce additional couplings
- Useful where installation space is limited
- Simplifies some fitting-to-fitting connections
- Maintains permanent solvent-weld joints
Typical Applications
Residential DWV Systems
- Drain piping offsets
- Waste piping alignment
- Vent piping adjustments
- Fixture drainage systems
- Compact plumbing layouts
Commercial & Industrial DWV
- Building drainage systems
- Commercial waste piping
- Vent system routing
- Repair and retrofit work
- Compatible industrial drainage systems
Solvent-Weld Installation
Clean and prepare the mating PVC surfaces according to accepted solvent-weld procedures. Apply compatible PVC primer and solvent cement where required.
Fully seat compatible PVC DWV pipe into the hub end and insert the spigot end into the mating hub fitting. Confirm the required 30-degree orientation before the solvent cement begins to set.
Allow all completed joints to cure according to the solvent-cement manufacturer's recommendations before placing the system into normal service.
Our plumbing specialists can help review your pipe size, required offset, hub and spigot connections, and DWV layout before you order.
Email the GetPipe.com Team Visit Quick SupportFrequently Asked Questions
What angle is a 1/6 bend?
A 1/6 bend provides a 30-degree directional change.
What does HUB mean?
Hub refers to the socket connection that accepts compatible PVC DWV pipe for solvent-weld installation.
What does SPG mean?
SPG means spigot. The spigot end fits directly into a compatible hub fitting.
How is a street 1/6 bend different from a standard 1/6 bend?
A standard 1/6 bend typically has hubs on both ends, while a street version uses a hub on one end and a spigot on the other.
Why use a street-style fitting?
The spigot end can connect directly into another hub fitting, helping reduce the need for an additional coupling or intermediate pipe section.
What is this fitting used for?
It is commonly used to create a gentle 30-degree directional adjustment or offset in compatible DWV piping.
How is the fitting installed?
Both the hub and spigot connections are installed using compatible PVC solvent-weld procedures.
Is this fitting intended for pressure piping?
No. This fitting is intended for non-pressurized drain, waste, and vent applications.
What material is the fitting made from?
The fitting is manufactured from durable, corrosion-resistant PVC.
What should I verify before ordering?
Confirm the nominal size, Hub x Spigot configuration, 30-degree bend requirement, and compatibility with the intended PVC DWV system.
Important Ordering & Installation Notes
- This listing is for a PVC DWV 1/6 Bend Street Elbow with HUB x SPG connections.
- The fitting provides a 30-degree directional change.
- Verify the required nominal size before ordering.
- The hub end accepts compatible PVC DWV pipe.
- The spigot end fits directly into a compatible hub fitting.
- The street configuration may reduce the need for additional couplings.
- Designed for non-pressurized drain, waste, and vent applications.
- Use compatible PVC primer and solvent cement where required.
- Clean and prepare all mating surfaces before solvent welding.
- Fully seat both connections during assembly.
- Confirm the required 30-degree orientation before the solvent cement begins to set.
- Allow completed joints to cure according to the cement manufacturer's recommendations.
- Do not use this fitting for pressure applications.
- Verify the proposed bend is appropriate for the specific DWV layout.
- Follow applicable plumbing codes and installation requirements.
