Milwaukee
Milwaukee Tool SHOCKWAVE Impact Right Angle Adapter
- SKU:
- MLW48-32-2390
- Availability:
- Usually Ships Same Day
- Weight:
- 0.50 LBS
Description
DUTY®
Impact Right-Angle
Bit Adapter
Turn the driving approach through a right angle when a straight tool body cannot reach the screw.
Product Overview
The right-angle layout helps reach past obstructions with a hex bit aligned to the fastener.
Check space for the adapter head and the chosen bit; the tool still needs room to be held securely.
- Confined accessSlim profile for tight access.
- Durable gearingHardened driving gears.
- Bit retentionMagnetic accessory hold.
- Controlled gripRubber overmold grip.
Technical Specifications
- Accessory drive
- 1/4 in hex
- Layout
- Right angle
- Gear construction
- Hardened
- Bit retention
- Magnetic
- Grip surface
- Rubber overmold
- Tool use
- Impact / drill
Choose the Correct Fit
Select a compatible 1/4-inch hex accessory and verify it is retained. Check the bit rating for the intended operating mode.
Position the adapter so the bit aligns with the fastener. Support the tool and adapter according to their operating instructions.
Installation & Care
Start with controlled driving force and avoid letting the head twist against an obstruction. Stop if the bit slips or the assembly binds.
Disconnect the tool before changing accessories. Check gears, body and retention for damage before continued use.
Small Details. Big Jobsite Energy.
Get set. Stay focused. Make your next move count.
THE NEXT JOB.
Ask Willy:
Need help checking the fit? Tell Willy your tool, accessory and working dimensions so the GetPipe team can help.
Important Product Questions
Does it fit every tight space?
Measure the complete head-and-bit assembly against the available clearance. The right-angle shape changes the approach but does not eliminate the space needed around the screw.
Does the adapter reduce torque to a safe value?
No torque-limiting function is specified. Follow the fastener and tool requirements rather than relying on the gearing to prevent overtightening.
Can I fit any hex accessory?
The connection is for compatible 1/4-inch hex accessories. Check the accessory’s intended task, retention and operating rating before use.
