Milwaukee
Milwaukee Tool Low-Profile Customizable Foam Insert for PACKOUT Drawer Tool Boxes
- SKU:
- MLW48-22-8453
- Availability:
- Usually Ships Same Day
- Weight:
- 0.68 LBS
Description
DUTY®
Low-Profile Foam
Drawer Insert
Cut a fitted layout for your tools using layered foam in a compatible PACKOUT drawer.
Product Overview
Tracing each tool before cutting lets you arrange a useful layout and leave finger space for removal.
Cut to the required depth and peel away layers rather than removing the whole thickness at once.
- Custom layoutTrace a custom tool layout.
- Layered constructionPeel layers to form the recess.
- Fitted storageDedicated tool cutouts.
- Drawer-specific fitFor the specified drawer.
Technical Specifications
- Material
- Foam
- Construction
- Layered
- Drawer families
- 2 / 3 / 4 / multi-depth
- Layout method
- Trace tool outline
- Cutting tool
- Knife
- Recess depth
- Peel to desired depth
Choose the Correct Fit
Match the foam version to the drawer model. Check tool height above the proposed recess so the loaded drawer can close freely.
Lay out all tools before tracing, leaving space for fingers and adequate foam between cavities. Work on a protected cutting surface outside the drawer.
Installation & Care
Cut carefully to the intended depth and peel layers gradually. Keep hands clear of the blade and avoid cutting through the supporting base layer.
Test the fit before returning the drawer to service. Remove loose foam and inspect cutouts after use; a damaged insert may no longer retain tools well.
Small Details. Big Jobsite Energy.
Get set. Stay focused. Make your next move count.
THE NEXT JOB.
Ask Willy:
Tell Willy what you need to store, the available space and how you plan to carry or mount it. We can help check the fit before you order.
Important Product Questions
Which drawer boxes can use this insert?
It is specified for 48-22-8442, 48-22-8443, 48-22-8444 and the 48-22-8447 Multi-Depth 3-Drawer Tool Box.
How do I make a tool recess?
Trace the tool, cut its outline to the required depth with a knife, then peel out layers. Test gradually so the recess does not become too loose.
Does the foam increase the drawer’s load limit?
No. The foam organizes and cushions stored tools. The drawer box and supporting system retain their original load limits.
