Milwaukee
Milwaukee Tool Low-Profile Handle for PACKOUT Rolling Tool Box
- SKU:
- MLW48-22-8027
- Availability:
- Usually Ships Same Day
- Weight:
- 5.81 LBS
Description
DUTY®
Low-Profile Handle
Rolling Box Upgrade
Replace the handle on a compatible rolling tool box to achieve a 19.75-inch fully collapsed height.
Product Overview
The lower collapsed height helps the rolling box fit beneath many full-size truck-bed covers.
An ergonomic grip supports handling, with a 250 lb capacity when installed in the specified box.
- Lower profile19.75 in collapsed height.
- Replacement fitFor the listed rolling tool boxes.
- Ergonomic gripComfortable grip position.
- Simple changeoverOne tool; original screws.
Technical Specifications
- Collapsed height
- 19.75 in
- Installed capacity
- 250 lb
- Box fit
- 48-22-8426 / 8427
- Grip
- Ergonomic
- Installation tool
- #2 Phillips
- Fastener reuse
- Original screws
Choose the Correct Fit
Confirm the rolling box model is 48-22-8426 or 48-22-8427. Measure the lowest truck-cover clearance and allow room above the collapsed handle.
Unload and stabilize the box before installation. Remove the two original screws with a #2 Phillips screwdriver and keep them for reassembly.
Installation & Care
Lift out the old handle, insert the new handle into the same openings, then secure it using the original screws as directed.
Cycle the handle through extension and collapse before loading. Inspect mounting points and keep the installed assembly within its 250 lb limit.
Small Details. Big Jobsite Energy.
Get set. Stay focused. Make your next move count.
THE NEXT JOB.
Ask Willy:
Tell Willy what you need to store, the available space and how you plan to carry or mount it. We can help check the fit before you order.
Important Product Questions
Will it fit under every truck-bed cover?
No. The fully collapsed height is 19.75 inches, but bed and cover clearances vary. Measure your setup first.
Which boxes does it fit?
The specified hosts are PACKOUT Rolling Tool Boxes 48-22-8426 and 48-22-8427.
What tool is needed for installation?
The instructions specify a #2 Phillips screwdriver and reuse of the original handle-mounting screws.
