Merit Brass
Carbon Press 45 Degree Elbows
- SKU:
- MBCP45
- Availability:
- Usually Ships Same Day
- Weight:
- 0.00 LBS
Description
CarbonPress Carbon Steel Press 45° Elbows
CarbonPress® Carbon Steel Press 45° Elbows provide a 45-degree change in direction in carbon steel piping systems without welding or threading. The CarbonPress® system is designed for 1/2" through 2" black iron, epoxy-coated, and galvanized Schedule 10 through Schedule 40 carbon steel pipe.
When the fitting is pressed, an internal grab ring deforms so its sharp edges grip the outside diameter of the pipe, securing the fitting axially and helping prevent movement. At the same time, the elastomeric sealing element impinges on the pipe to create a leak-tight seal.
CarbonPress® fittings can be installed using Milwaukee or RIDGID press tools with the associated jaws or rings designed for carbon steel applications.
Product Highlights
- 45° carbon steel press elbow
- Part of the CarbonPress® carbon steel press fitting system
- Available for 1/2" through 2" piping systems
- Suitable for black iron, epoxy-coated, and galvanized carbon steel pipe
- Compatible with Schedule 10 through Schedule 40 carbon steel pipe
- Grab ring mechanically grips the outside diameter of the pipe after pressing
- Elastomeric sealing element creates a leak-tight seal
- Leak Before Press (LBP) Technology
- EPDM and HNBR sealing options
- Compatible with Milwaukee or RIDGID tools and associated carbon steel jaws/rings
- 15-year limited warranty
Technical Specifications
| Product Type | 45° Press Elbow |
|---|---|
| System | CarbonPress® |
| Connection Type | Press x Press |
| Configuration | 45° Elbow |
| Size Range | 1/2" - 2" |
| Compatible Pipe | Black Iron, Epoxy-Coated & Galvanized Carbon Steel Pipe |
| Compatible Pipe Schedules | Schedule 10 - Schedule 40 |
| Sealing Options | EPDM or HNBR |
| EPDM Temperature Range | -40°F to 300°F (-40°C to 148°C) |
| HNBR Temperature Range | -40°F to 200°F (-40°C to 93°C) |
| Press Technology | Leak Before Press (LBP) |
| Compatible Tool Brands | Milwaukee & RIDGID |
| EPDM Certification | IAPMO Z 1117 |
| HNBR Certification | IAPMO/ANSI LC 4 / CSA 6.32 |
| Warranty | 15-Year Limited Warranty |
CarbonPress® Connection Technology
During installation, the fitting is pressed onto the carbon steel pipe using the appropriate press tool and jaw or ring. As the connection is pressed, a grab ring deforms and its sharp edges grip the outside diameter of the pipe, securing the fitting axially and preventing movement.
At the same time, an elastomeric sealing element impinges on the pipe to create a leak-tight connection.
Leak Before Press Technology
CarbonPress® fittings incorporate Leak Before Press (LBP) Technology, helping identify connections that have not been properly pressed during system testing.
EPDM & HNBR Seal Options
- EPDM: -40°F to 300°F (-40°C to 148°C)
- HNBR: -40°F to 200°F (-40°C to 93°C)
Select the sealing element appropriate for the intended system and application.
Pipe Compatibility
CarbonPress® is a 1/2" through 2" carbon steel press fitting system suitable for use with:
- Black iron carbon steel pipe
- Epoxy-coated carbon steel pipe
- Galvanized carbon steel pipe
- Schedule 10 through Schedule 40 pipe
Press Tool Compatibility
CarbonPress® fittings can be pressed using Milwaukee or RIDGID tools with the associated jaws or rings intended for carbon steel press applications.
Applications
Press technology has a multi-decade history of successful use in piping applications including:
- Hydronic heating systems
- Fire sprinkler systems
- Fluid conveyance
- Gas conveyance
- Oil systems
- Low-pressure steam
Seal selection, system design, and installation requirements should be verified for the specific application.
Certifications & Warranty
- EPDM: IAPMO Z 1117
- HNBR: IAPMO/ANSI LC 4 / CSA 6.32
- Warranty: 15-Year Limited Warranty
Selection & Application Guidance
- Select the fitting size to match the carbon steel pipe size.
- Verify the pipe is within the supported Schedule 10 through Schedule 40 range.
- Confirm whether EPDM or HNBR is appropriate for the intended application.
- Verify temperature and media compatibility before installation.
- Use compatible Milwaukee or RIDGID press tools with the appropriate carbon steel jaws or rings.
- Follow the applicable CarbonPress® installation requirements when preparing and pressing each connection.
Product Documents
CarbonPress® Dimensional Catalog
Review CarbonPress® fitting dimensions and additional technical information.
Press Fittings & Valves Catalog
Review additional Merit Brass press fitting, valve, and system information.
Need Help Selecting CarbonPress® Fittings?
Our industrial PVF specialists can help review your pipe size, pipe schedule, seal requirements, application, quantity, and press-tool compatibility before you order.
Frequently Asked Questions
What pipe can CarbonPress® fittings be used with?
CarbonPress® is suitable for black iron, epoxy-coated, and galvanized Schedule 10 through Schedule 40 carbon steel pipe.
What sizes does the CarbonPress® system cover?
The CarbonPress® system covers sizes from 1/2" through 2".
What is the EPDM temperature range?
The EPDM temperature range is -40°F to 300°F (-40°C to 148°C).
What is the HNBR temperature range?
The HNBR temperature range is -40°F to 200°F (-40°C to 93°C).
Do CarbonPress® fittings have Leak Before Press technology?
Yes. CarbonPress® fittings incorporate Leak Before Press (LBP) Technology.
What press tools can be used with CarbonPress®?
CarbonPress® fittings can be pressed with Milwaukee or RIDGID tools and the associated jaws or rings for carbon steel applications.
How does the CarbonPress® connection secure the pipe?
When pressed, a grab ring deforms and its sharp edges grip the outside diameter of the pipe. At the same time, the elastomeric sealing element impinges on the pipe to create a leak-tight seal.
What warranty is provided?
CarbonPress® fittings have a 15-year limited warranty.
Important Ordering Notes
- CarbonPress® 45° carbon steel press elbow.
- Designed for 1/2" through 2" carbon steel piping systems.
- Suitable for black iron, epoxy-coated, and galvanized pipe.
- Compatible with Schedule 10 through Schedule 40 carbon steel pipe.
- EPDM and HNBR sealing options have different temperature ratings and certifications.
- Leak Before Press (LBP) Technology.
- 15-year limited warranty.
- Confirm pipe size, schedule, seal material, and application requirements before ordering.
