Merit Brass
Carbon Press 45 Degree Street Elbows
- SKU:
- MBCP45S
- Availability:
- Usually Ships Same Day
- Weight:
- 0.00 LBS
Description
CarbonPress® Carbon Steel Press 45° Street Elbows
CarbonPress® Carbon Steel Press 45° Street Elbows provide a compact 45-degree change in direction in carbon steel piping systems. The street-elbow configuration is designed to simplify directional changes where a standard press elbow configuration is not preferred.
CarbonPress® is a 1/2" through 2" carbon steel press fitting system suitable for use with black iron, epoxy-coated, and galvanized Schedule 10 through Schedule 40 carbon steel pipe. When pressed, an internal grab ring grips the outside diameter of the pipe while an elastomeric sealing element creates a leak-tight seal.
CarbonPress® fittings can be installed using Milwaukee or RIDGID press tools with the associated jaws or rings designed for carbon steel applications.
Product Highlights
- 45° carbon steel press street elbow
- Part of the CarbonPress® carbon steel press fitting system
- Designed for 1/2" through 2" piping systems
- Suitable for black iron, epoxy-coated, and galvanized carbon steel pipe
- Compatible with Schedule 10 through Schedule 40 carbon steel pipe
- Grab ring mechanically secures the fitting to the pipe after pressing
- Elastomeric sealing element provides a leak-tight seal
- Leak Before Press (LBP) Technology
- EPDM and HNBR sealing options
- Compatible with Milwaukee or RIDGID press tools and associated carbon steel jaws/rings
- 15-year limited warranty
Technical Specifications
| Product Type | 45° Street Elbow |
|---|---|
| System | CarbonPress® |
| Configuration | 45° Street Elbow |
| Size Range | 1/2" - 2" |
| Compatible Pipe | Black Iron, Epoxy-Coated & Galvanized Carbon Steel Pipe |
| Compatible Pipe Schedules | Schedule 10 - Schedule 40 |
| Sealing Options | EPDM or HNBR |
| EPDM Temperature Range | -40°F to 300°F (-40°C to 148°C) |
| HNBR Temperature Range | -40°F to 200°F (-40°C to 93°C) |
| Press Technology | Leak Before Press (LBP) |
| Compatible Tool Brands | Milwaukee & RIDGID |
| EPDM Certification | IAPMO Z 1117 |
| HNBR Certification | IAPMO/ANSI LC 4 / CSA 6.32 |
| Warranty | 15-Year Limited Warranty |
CarbonPress® Connection Technology
When the fitting is pressed, a grab ring deforms and its sharp edges grip the outside diameter of the pipe, securing the fitting axially and helping prevent movement.
At the same time, an elastomeric sealing element impinges on the pipe to create a leak-tight connection.
45° Street Elbow Design
The street-elbow configuration provides a 45-degree directional change in the piping run while offering a compact connection arrangement. This configuration can be useful where installation space is limited or where the piping layout calls for a street-style elbow.
Leak Before Press Technology
CarbonPress® fittings incorporate Leak Before Press (LBP) Technology, helping identify connections that have not been properly pressed during system testing.
EPDM & HNBR Seal Options
- EPDM: -40°F to 300°F (-40°C to 148°C)
- HNBR: -40°F to 200°F (-40°C to 93°C)
Select the sealing element appropriate for the intended system and application.
Pipe Compatibility
CarbonPress® is suitable for use with:
- Black iron carbon steel pipe
- Epoxy-coated carbon steel pipe
- Galvanized carbon steel pipe
- Schedule 10 through Schedule 40 pipe
- Pipe sizes from 1/2" through 2"
Press Tool Compatibility
CarbonPress® fittings can be pressed using Milwaukee or RIDGID tools with the associated jaws or rings intended for carbon steel press applications.
Applications
Press technology has a multi-decade history of use in applications including:
- Hydronic heating systems
- Fire sprinkler systems
- Fluid conveyance
- Gas conveyance
- Oil systems
- Low-pressure steam
Seal selection and system requirements should be verified for the specific application.
Certifications & Warranty
- EPDM: IAPMO Z 1117
- HNBR: IAPMO/ANSI LC 4 / CSA 6.32
- Warranty: 15-Year Limited Warranty
Selection & Application Guidance
- Select the fitting size to match the carbon steel pipe size.
- Verify the pipe is within the supported Schedule 10 through Schedule 40 range.
- Confirm whether EPDM or HNBR is appropriate for the intended application.
- Verify temperature and media compatibility before installation.
- Use compatible Milwaukee or RIDGID press tools with the appropriate carbon steel jaws or rings.
- Follow the applicable CarbonPress® installation requirements when preparing and pressing each connection.
Product Documents
CarbonPress® Dimensional Catalog
Review CarbonPress® fitting dimensions and additional technical information.
Press Fittings & Valves Catalog
Review additional Merit Brass press fitting, valve, and system information.
Need Help Selecting CarbonPress® Fittings?
Our industrial PVF specialists can help review your pipe size, pipe schedule, seal requirements, application, quantity, and press-tool compatibility before you order.
Frequently Asked Questions
What is a CarbonPress® 45° street elbow used for?
It is used to create a 45-degree directional change in a CarbonPress® carbon steel piping system using a compact street-elbow configuration.
What pipe can CarbonPress® fittings be used with?
CarbonPress® is suitable for black iron, epoxy-coated, and galvanized Schedule 10 through Schedule 40 carbon steel pipe.
What sizes does the CarbonPress® system cover?
The CarbonPress® system covers sizes from 1/2" through 2".
What is the EPDM temperature range?
The EPDM temperature range is -40°F to 300°F (-40°C to 148°C).
What is the HNBR temperature range?
The HNBR temperature range is -40°F to 200°F (-40°C to 93°C).
Do CarbonPress® fittings have Leak Before Press technology?
Yes. CarbonPress® fittings incorporate Leak Before Press (LBP) Technology.
What press tools can be used with CarbonPress®?
CarbonPress® fittings can be pressed with Milwaukee or RIDGID tools and the associated jaws or rings for carbon steel applications.
How does the CarbonPress® connection secure the pipe?
When pressed, a grab ring deforms and its sharp edges grip the outside diameter of the pipe while the elastomeric sealing element creates a leak-tight seal.
What warranty is provided?
CarbonPress® fittings have a 15-year limited warranty.
Important Ordering Notes
- CarbonPress® 45° carbon steel press street elbow.
- Designed for 1/2" through 2" carbon steel piping systems.
- Suitable for black iron, epoxy-coated, and galvanized pipe.
- Compatible with Schedule 10 through Schedule 40 carbon steel pipe.
- EPDM and HNBR sealing options have different temperature ratings and certifications.
- Leak Before Press (LBP) Technology.
- 15-year limited warranty.
- Confirm pipe size, schedule, seal material, and application requirements before ordering.
