Braxton Harris

1/4" (CXC) Wrot 90 Degree Long Turn Elbow 1/4" Copper Sweat X 1/4" Copper Sweat "“ Wrot Copper "“ IAPMO Approved "“ NSF Approved

1/4" (CXC) Wrot Copper 90 Degree Elbow 1/4" Copper Sweat X 1/4" Copper Sweat "“ Wrot Copper "“ IAPMO Approved "“ NSF Approved

1/4" (CXC) Wrot Coupling Less Tube Stop 1/4" Copper Sweat X 1/4" Copper Sweat "“ Wrot Copper "“ IAPMO Approved "“ UL Listed

1/4" (CXC) Wrot Coupling w/ Dimpled Tube Stop 1/4" Copper Sweat X 1/4" Copper Sweat "“ Wrot Copper "“ IAPMO Approved "“ NSF Approved

1/4" (CXC) Wrot Coupling w/Rolled Tube Stop 1/4" Copper Sweat X 1/4" Copper Sweat "“ Wrot Copper "“ IAPMO Approved "“ NSF Approved

1/4" (FTG X C) Wrot 45 Degree Street Elbow 1/4" Fitting X 1/4" Copper Sweat "“ Wrot Copper "“ IAPMO Approved "“ NSF Approved

1/4" (FTG X C) Wrot 90 Degree Long Turn Street Elbow 1/4" Fitting X 1/4" Copper Sweat "“ Wrot Copper "“ IAPMO Approved "“ NSF Approved

1/4" (FTG X C) Wrot 90 Degree Street Elbow 1/4" Fitting X 1/4" Copper Sweat "“ Wrot Copper "“ IAPMO Approved "“ NSF Approved

1/4" (FTG X FPT) Wrot Fitting Female Adapter 1/4" Fitting X 1/4" Female pipe threads "“ Wrot Copper "“ IAPMO Approved "“ NSF Approved

1/4" (FTG X MPT) Wrot Fitting Male Adapter 1/4" Fitting X 1/4" Male pipe threads "“ Wrot Copper "“ IAPMO Approved "“ NSF Approved

1/4" - 20 TPI Plain Finished Hex Nut 1/4" INSIDE DIAMETER. 20 THREADS PER INCH. PLAIN FINISH.

1/4" - 20 TPI Zinc Plated Finished Hex Nut 1/4" INSIDE DIAMETER. 20 THREADS PER INCH. ZINC PLATED FINISH.

1/4" Barb Nylon Hose Splicer

1/4" Barb x 1/2" MPT Brass Hose Barb Adapter 1/4" BARB (HOSE ID) X 1/2" MALE PIPE THREADS

1/4" Barb X 1/4" Barb Nylon Hose Elbow

1/4" Barb x 1/4" Barb x 1/4" Barb Nylon Hose Tee

1/4" BARB X 1/4" FPT BRASS HOSE BARB ADAPTER 1/4" BARB (HOSE ID) X 1/4" FEMALE PIPE THREADS

1/4" Barb x 1/4" FPT Swivel Brass Adapter 1/4" Barb (Hose ID) x 1/4" Female Pipe Threads.

1/4" Barb x 1/4" MPT Brass Elbow

1/4" Barb x 1/4" MPT Brass Hose Barb Adapter 1/4" BARB (HOSE ID) X 1/4" MALE PIPE THREADS

1/4" BARB X 1/8" FPT BRASS HOSE BARB ADAPTER 1/4" BARB (HOSE ID) X 1/4" FEMALE PIPE THREADS

1/4" BARB X 1/8" MPT BRASS ELBOW

1/4" Barb x 1/8" MPT Brass Hose Barb Adapter 1/4" BARB (HOSE ID) X 1/8" MALE PIPE THREADS

1/4" BARB X 3/8" FPT BRASS HOSE BARB ADAPTER 1/4" BARB (HOSE ID) X 3/8" FEMALE PIPE THREADS

1/4" Barb x 3/8" MPT Brass Hose Barb Adapter 1/4" BARB (HOSE ID) X 3/8" MALE PIPE THREADS

1/4" Beveled Faucet Bibb Washer TRADE SIZE 1/4″, ACTUAL OD 9/16″  

1/4" Brass Saddle Clamp w/ Valve 1/4″ BRASS SADDLE CLAMP W/ VALVE  

1/4" Closed Hex Acorn Nickel Plated Cap Nut 1/4" X 7/16"

1/4" Closet Flange Extension Kit w/ Gasket INCLUDES: 1PC- 1/2 FLANGE EXTENSION, 1PC- 1/4" FLANGE EXTENSION, 1 PAIR 3-1/2" BOLTS/ NUTS/ WASHERS AND FOUR WOOD SCREWS. THIS EXTENSION KIT IS USED FOR REPLACING, REPAIRING OR RETILING BATHROOM FLOOR.

1/4" Closet Flange Extension Less Gasket 1/4" thick flange. This extension is used to bring closet flange to floor height when tiling or repairing bathroom floors. Installation is simple. 1) Clean old flange 2) Place a bead of sealant on original flange...

1/4" Closet Flange Extension w/ Gasket 1/4" thick flange comes with gasket. This extension is used for replacing, repairing, retiling bathroom floor. Installation is simple: 1) Clean old flange 2) Replace bolts 3) Must use wax from old wax ring to get...

1/4" CTS Solid Copper 2-hole Tube Strap

1/4" Flare Brass Elbow 1/4" FLARE THREADS. Used with copper, brass, aluminum, welded steel tubing. Used on lines handling hard to hold liquids and gases, including gasoline, grease oil, water, vacuum lines, air lines, LP and natural gasolines,...

1/4" Flare Brass Forged Short Nut 1/4" FLARE THREADS. Used with copper, brass, aluminum, welded steel tubing. Used on lines handling hard to hold liquids and gases, including gasoline, grease oil, water, vacuum lines, air lines, LP and natural...

1/4" Flare Brass Plug 1/4" FLARE THREADS. Used with copper, brass, aluminum, welded steel tubing. Used on lines handling hard to hold liquids and gases, including gasoline, grease oil, water, vacuum lines, air lines, LP and natural gasolines,...

1/4" Flare Brass Short Nut (style 41S) 1/4" flare threads. Used with copper, brass, aluminum, welded steel tubing. Used on lines handling hard to hold liquids and gases, including gasoline, grease oil, water, vacuum lines, air lines, LP and natural...

1/4" Flare Brass Tee 1/4" X 1/4" X 1/4" FLARE THREADS. Used with copper, brass, aluminum, welded steel tubing. Used on lines handling hard to hold liquids and gases, including gasoline, grease oil, water, vacuum lines, air lines, LP and natural...

1/4" Flare Brass Union 1/4" FLARE THREADS. Used with copper, brass, aluminum, welded steel tubing. Used on lines handling hard to hold liquids and gases, including gasoline, grease oil, water, vacuum lines, air lines, LP and natural gasolines,...

1/4" Flare x 1/2" FPT Brass Coupling 1/4" Flare Threads X 1/2" Female Pipe Thread. Used with copper, brass, aluminum, welded steel tubing. Used on lines handling hard to hold liquids and gases, including gasoline, grease oil, water, vacuum lines, air...

1/4" Flare x 1/2" MPT Brass Half Union Used with copper, brass, aluminum, welded steel tubing. Used on lines handling hard to hold liquids and gases, including gasoline, grease oil, water, vacuum lines, air lines, LP and natural gasolines,...