Braxton Harris

1/2" Galvanized Steel Insert Coupling

1/2" Galvanized Swivel Ring for Iron Pipe Fits 1/2" iron pipe. 3/8" rod size. Maximum load: 400 lbs. UL Listed. FM approved. Meets federal specifications: WW-H-171 (Type), MSS-SP-69 (Type 10).

1/2" High Speed Drill Bit

1/2" ID (1-1/2"OD) Zinc Plated Flat Fender Washer

1/2" ID (5/8" OD) Wire Handle Fitting Brush 1/2" inside diameter (5/8" OD) carbon steel wire bristles. For cleaning the inside of sweat fittings.

1/2" ID (5/8"OD) Wire Handle Fitting Brush- Bulk 1/2" inside diameter (5/8" OD) carbon steel wire bristles. For cleaning the inside of sweat fittings.

1/2" ID Plastic Handle Fitting Brush 5/8" O.D. Carbon steel.

1/2" INSERT FOR CPVC, FIRE RETARDANT PLASTIC INSULATOR COMPARABLE TO HOLDRITE* 604

1/2" Insert x 1/2" MPT Red Brass Male Insert Adapter- Lead Free

1/2" IPS (3/4" cts) C.P. Flexible Floor and Ceiling Plate 1/2" iron pipe size. 3/4" copper tube size. Non-corrosive. 100% rust proof. One piece split chrome plated Polypropylene. 2.787" OD.

1/2" IPS (3/4"cts) White Flexible Floor and Ceiling Plate 1/2" iron pipe size. 3/4" copper tube size. Non-corrosive. 100% rust proof. One piece split Polypropylene. 2.787" OD.

1/2" IPS 1-Hole Galvanized Pipe Strap FOR 1/2" STEEL PIPE.

1/2" IPS 2-hole Galvanized Pipe Strap FOR 1/2" STEEL PIPE.

1/2" IPS ASBESTOS FREE RING GASKET FITS 1/2″ IRON PIPE. ASBESTOS FREE RING GASKET MEETS ASTM F152, F36A, F146, 1/16″ THICK. 150 LBS. MAY BE USED FOR STEAM APPLICATIONS.  

1/2" IPS Brass Water Meter Coupling w/ Gasket COUPLING = 2-3/8″ LENGTH, 1/2″ IPT, SWIVEL NUT= 45/64″ LENGTH, 3/4″ THREADS.  

1/2" IPS Deep Bell Flange- Chrome Plated SURE GRIP. CHROME PLATED

1/2" IPS Flange Connection Kit w/ Asbestos Free Full Face Gasket FITS 1/2" IRON PIPE. BOLT SIZE: 1/2" DIAMETER X 1-3/4" LENGTH. KIT INCLUDES: 4 BOLTS, 4 NUTS, 1 ASBESTOS FREE FULL FACE GASKET. HEX BOLTS AND NUTS MEET ASTM A307. GASKETS MEET ASTM F152,...

1/2" IPS Flange Connection Kit w/ Asbestos Free Gasket FITS 1/2" IRON PIPE. BOLT SIZE: 1/2" DIAMETER X 1-3/4" LENGTH. KIT INCLUDES: 4 BOLTS, 4 NUTS, 1 ASBESTOS FREE RING GASKET. HEX BOLTS AND NUTS MEET ASTM A307. GASKET MEETS ASTM F152, F36A, F146. 150...

1/2" IPS Flange Connection Kit w/ Full Face Rubber Gasket FITS 1/2" IRON PIPE. BOLT SIZE: 1/2" DIAMETER X 1-3/4" LENGTH. KIT INCLUDES: 4 BOLTS, 4 NUTS, 1 RED RUBBER FULL FACE GASKET. HEX BOLTS AND NUTS MEET ASTM A307. RUBBER GASKETS MEET ASTM D1330. 150...

1/2" IPS Flange Connection Kit w/ Red Rubber Gasket FITS 1/2" IRON PIPE. BOLT SIZE: 1/2" DIAMETER X 1-3/4" LENGTH. KIT INCLUDES: 4 BOLTS, 4 NUTS, 1 RED RUBBER GASKET. HEX BOLTS AND NUTS MEET ASTM A307. RUBBER GASKETS MEET ASTM D1330. 150 LBS. DO NOT USE...

1/2" IPS Floor & Ceiling Plate SURE GRIP. CHROME PLATED

1/2" IPS Floor & Ceiling Plate Heavy Pattern HEAVY GAUGE CHROME PLATED

1/2" IPS Galvanized Clevis Hanger (401#) Standard duty (401#) steel.

1/2" IPS Long Galvanized Compression (Dresser) Coupling 3-3/8" LENGTH. MADE OF MALLEABLE IRON. 125 PSI 120 DEGREES FAHRENHEIT. COMES WITH RUBBER GASKETS & METAL WASHERS. ALL COMPRESSION COUPLING MUST BE RESTRAINED ON ENDS.

1/2" IPS Low Pattern Flange - Flat Black Fits 1/2" Iron Pipe size. Sure grip Escutcheon. Flange width is 2-1/2".

1/2" IPS Low Pattern Flange - PVD Satin Nickel Fits 1/2" Iron Pipe size. Sure grip Escutcheon. Flange width is 2-1/2".

1/2" IPS Low Pattern Flange - PVD Stainless Steel Fits 1/2" Iron Pipe size. Sure grip Escutcheon. Flange width is 2-1/2".

1/2" IPS PVC Compression (Dresser) Coupling 1/2″ IRON PIPE SIZE. 3-3/4″ LENGTH. MAXIMUM PRESSURE: 125 PSI. MUST BE RESTRAINED ON BOTH ENDS.  

1/2" IPS PVC COMPRESSION TEE 1/2″ IPS PVC COMPRESSION TEE-1/2″ X 1/2″ IRON PIPE SIZE X 1/2″ IRON PIPE SIZE THREADED BRANCH INLET. 4-3/4″ LENGTH. MAXIMUM PRESSURE: 125 PSI. MUST BE RESTRAINED ON ENDS.  

1/2" IPS PVC Expandable Repair Coupling 1/2 IRON PIPE SIZE, 5-3/4″ LENGTH, MAXIMUM EXTENSION: 2″, HEAVY DUTY PVC CONSTRUCTION WITH DOUBLE O-RING BUNA-N-SEAL. RATED @ 150 PSI @ 72 DEGREES FAHRENHEIT. DESIGNED FOR SOLVENT WELD INSTALLATION IN...

1/2" IPS Short Galvanized Compression (Dresser) Coupling 2-1/4″ LENGTH. MADE OF MALLEABLE IRON. 125 PSI 120 DEGREES FAHRENHEIT. COMES WITH RUBBER GASKETS & METAL WASHERS. ALL COMPRESSION COUPLING MUST BE RESTRAINED ON ENDS.

1/2" IPS Shower Arm Flange w/ Set Screw DIE CAST CHROME PLATED.  

1/2" IPS Shower Arm Flange w/ Set Screw - PVD Stainless Steel 2-1/2" outside diameter. Fits 1/2" Iron Pipe Size. Hidden set screw holds flange in place. Can be used with ceiling mount and wall mount shower heads.

1/2" IPS Shower Arm Flange w/ Set Screw- PVD Satin Nickel 2-1/2" outside diameter. Fits 1/2" Iron Pipe Size. Hidden set screw holds flange in place. Can be used with ceiling mount and wall mount shower heads.

1/2" IPS Shower Arm Flange- Chrome Plated 1/2" ID. 2-1/2" OD

1/2" IPS Square Shower Arm Flange w/ O-ring- PVD Satin Nickel Flange is 3" outside diameter (side to side). 1/2" Iron Pipe Size threads. Rubber O-ring holds flange in place. Made of heavy solid cast brass. Can be used with ceiling or wall mount shower...

1/2" IPS Square Shower Arm Flange w/ O-ring- PVD Stainless Steel Flange is 3" outside diameter (side to side). 1/2" Iron Pipe Size threads. Rubber O-ring holds flange in place. Made of heavy solid cast brass. Can be used with ceiling or wall mount...

1/2" IPS White Poly Low Pattern Flange 1/2" IPS WHITE POLY LOW PATTERN FLANGECORROSION RESISTANT. 2-1/2" DIAMETER. IDEAL FOR PAINTED WALLS. CANNOT PIT OR RUST. WILL NOT LOOSE ORIGINAL GRIP.

1/2" IPS x 10" "S" Style Shower Arm Chrome plated brass. Increases height of shower head by 10″.  

1/2" IPS x 10" "S" Style Shower Arm- PVD Satin Nickel S- style Shower Arm, Length from wall 1/2" x 7", Height from Wall Connection + 10". Solid brass.