Braxton Harris

1/4" Closet Flange Extension Kit w/ Gasket INCLUDES: 1PC- 1/2 FLANGE EXTENSION, 1PC- 1/4" FLANGE EXTENSION, 1 PAIR 3-1/2" BOLTS/ NUTS/ WASHERS AND FOUR WOOD SCREWS. THIS EXTENSION KIT IS USED FOR REPLACING, REPAIRING OR RETILING BATHROOM FLOOR.

1/4" Closet Flange Extension Less Gasket 1/4" thick flange. This extension is used to bring closet flange to floor height when tiling or repairing bathroom floors. Installation is simple. 1) Clean old flange 2) Place a bead of sealant on original flange...

1/4" Closet Flange Extension w/ Gasket 1/4" thick flange comes with gasket. This extension is used for replacing, repairing, retiling bathroom floor. Installation is simple: 1) Clean old flange 2) Replace bolts 3) Must use wax from old wax ring to get...

1/4" CTS Solid Copper 2-hole Tube Strap

1/4" Flare Brass Elbow 1/4" FLARE THREADS. Used with copper, brass, aluminum, welded steel tubing. Used on lines handling hard to hold liquids and gases, including gasoline, grease oil, water, vacuum lines, air lines, LP and natural gasolines,...

1/4" Flare Brass Forged Short Nut 1/4" FLARE THREADS. Used with copper, brass, aluminum, welded steel tubing. Used on lines handling hard to hold liquids and gases, including gasoline, grease oil, water, vacuum lines, air lines, LP and natural...

1/4" Flare Brass Plug 1/4" FLARE THREADS. Used with copper, brass, aluminum, welded steel tubing. Used on lines handling hard to hold liquids and gases, including gasoline, grease oil, water, vacuum lines, air lines, LP and natural gasolines,...

1/4" Flare Brass Short Nut (style 41S) 1/4" flare threads. Used with copper, brass, aluminum, welded steel tubing. Used on lines handling hard to hold liquids and gases, including gasoline, grease oil, water, vacuum lines, air lines, LP and natural...

1/4" Flare Brass Tee 1/4" X 1/4" X 1/4" FLARE THREADS. Used with copper, brass, aluminum, welded steel tubing. Used on lines handling hard to hold liquids and gases, including gasoline, grease oil, water, vacuum lines, air lines, LP and natural...

1/4" Flare Brass Union 1/4" FLARE THREADS. Used with copper, brass, aluminum, welded steel tubing. Used on lines handling hard to hold liquids and gases, including gasoline, grease oil, water, vacuum lines, air lines, LP and natural gasolines,...

1/4" Flare x 1/2" FPT Brass Coupling 1/4" Flare Threads X 1/2" Female Pipe Thread. Used with copper, brass, aluminum, welded steel tubing. Used on lines handling hard to hold liquids and gases, including gasoline, grease oil, water, vacuum lines, air...

1/4" Flare x 1/2" MPT Brass Half Union Used with copper, brass, aluminum, welded steel tubing. Used on lines handling hard to hold liquids and gases, including gasoline, grease oil, water, vacuum lines, air lines, LP and natural gasolines,...

1/4" Flare x 1/4" FPT Brass Coupling 1/4" FLARE THREADS X 1/4" FEMALE PIPE THREAD. Used with copper, brass, aluminum, welded steel tubing. Used on lines handling hard to hold liquids and gases, including gasoline, grease oil, water, vacuum lines, air...

1/4" Flare x 1/4" MPT Brass Half Union 1/4" FLARE THREADS X 1/4" MALE PIPE THREAD. Used with copper, brass, aluminum, welded steel tubing. Used on lines handling hard to hold liquids and gases, including gasoline, grease oil, water, vacuum lines, air...

1/4" Flare x 1/8" FPT Brass Coupling 1/4" FLARE X 1/8" FPT BRASS FEMALE COUPLING/1/4" FLARE THREADS X 1/8" FEMALE PIPE THREAD. Used with copper, brass, aluminum, welded steel tubing. Used on lines handling hard to hold liquids and gases, including...

1/4" Flare x 1/8" MPT Brass Elbow Style 49. 1/4" flare threads x 1/8" male pipe threads. Used with copper, brass, aluminum, welded steel tubing. Used on lines handling hard to hold liquids and gases, including gasoline, grease oil, water, vacuum lines,...

1/4" Flare x 1/8" MPT Brass Half Union 1/4" FLARE THREADS X 1/8" MALE PIPE THREAD. Used with copper, brass, aluminum, welded steel tubing. Used on lines handling hard to hold liquids and gases, including gasoline, grease oil, water, vacuum lines, air...

1/4" Flare x 3/8" MPT Brass Half Union Used with copper, brass, aluminum, welded steel tubing. Used on lines handling hard to hold liquids and gases, including gasoline, grease oil, water, vacuum lines, air lines, LP and natural gasolines,...

1/4" Flat Faucet Bibb Washer (100pcs) TRADE SIZE 1/4″. ACTUAL OD 9/16″  

1/4" FPT Air Cock Lever Handle w/ Hex Shoulder 1/4" X 1/4" FEMALE PIPE THREADS. DOUBLE FEMALE HEX SHOULDER. SOLID BRASS. FURNISHED WITH SPRING BOTTOM.

1/4" FPT Air Cock Lever Handle w/ Round Shoulder 1/4" X 1/4" FEMALE PIPE THREADS. DOUBLE FEMALE ROUND SHOULDER. SOLID BRASS. FURNISHED WITH SPRING BOTTOM.

1/4" FPT Air Cock Tee Handle w/ Round Shoulder 1/4" X 1/4" FEMALE PIPE THREADS. DOUBLE FEMALE ROUND SHOULDER. SOLID BRASS. FURNISHED WITH SPRING BOTTOM.

1/4" FPT Brass Standard Port Ball Valve- Threaded PORT SIZE: .298". 1/4" X 1/4" FEMALE PIPE THREADS. 400 PSI WATER, OIL, GAS. 150 PSI WORKING STEAM PRESSURE. HARD CHROME PLATED BRASS BALL. QUARTER TURN OPERATION. DACROMET PLATED STEEL HANDLES WITH VINYL...

1/4" FPT Bronze Cap- Lead Free 1-1/4″ FEMALE PIPE THREADS, CAST BRONZE.  

1/4" FPT Standard Galvanized Merchant Coupling

1/4" FPT Threaded Bronze Union- Lead Free 1/4" FEMALE PIPE THREADS, CAST BRONZE.

1/4" FPT X 1/4" FPT Straight Needle Valve- Lead Free 1/4″ X 1/4″ Female Pipe Thread. Brass. Straight Pattern.  

1/4" FPT x 1/4" MPT 90 Degree Bronze Street Elbow- Lead Free 1/4" FEMALE PIPE THREADS X 1/4" MALE PIPE THREADS, CAST BRONZE.

1/4" FPT X 1/8" FPT Bronze Reducing Coupling- Lead Free 1/4″ X 1/8″ FEMALE PIPE THREADS, CAST BRONZE.  

1/4" Galvanized Malleable Locknut/ Backnut

1/4" High Speed Drill Bit  

1/4" ID (1-1/2"OD) Zinc Plated Flat Fender Washer

1/4" ID (3/8" OD) Wire Handle Fitting Brush 1/4" inside diameter (3/8" OD) carbon steel wire bristles. For cleaning the inside of sweat fittings.

1/4" ID Plastic Handle Fitting Brush 3/8" O.D. Carbon steel.

1/4" Large Beveled Faucet Bibb Washer (100pcs) TRADE SIZE 1/4″ L, ACTUAL OD 19/32″  

1/4" Large Flat Faucet Bibb Washer (100pcs) TRADE SIZE 1/4″ L. ACTUAL OD 19/32″.  

1/4" MPT Air Cock Lever Handle w/ Hex Shoulder 1/4" X 1/4" MALE PIPE THREADS. DOUBLE MALE HEX SHOULDER. SOLID BRASS. FURNISHED WITH SPRING BOTTOM.

1/4" MPT Bronze Raised Head Plug- Lead Free 1/4" male pipe threads. Made of cast bronze (red brass). Maximum working pressure: 150psi at 400 degrees Fahrenheit WSP (Water Steam Pressure). 200 psi WOG (Water Oil Gas) at -20 degrees F to 150 degrees F...

1/4" MPT LEVER HANDLE DRAIN COCK 1/4" MALE PIPE THREADS. BRASS.

1/4" MPT MALE PETCOCK TEE HANDLE W/ ROUND SHOULDER