Braxton Harris

1/2" Thick Sponge Closet Gasket (3-1/2"ID x 5-1/4"OD) FOR SETTING MOST FLOOR-MOUNTED TOILETS  

1/2" Universal Cast Top Beam Clamp 1/2" rod size. UL Listed, FM approved. Black finish. Maximum recommended load: 500 LBS. Malleable iron casting with a hardened cup point set screw and lock nut. Recommended for attaching hanger rod to top or bottom...

1/2" Wirsbo x 3/8" OD Qtr Turn Angle Stop- Lead Free 1/2″ F1960 pexA Inlet x 3/8″ OD compression outlet. Meets these codes: Uniform Plumbing Code, National Plumbing Code of Canada. Meets these standards: ASME A112.18.1-2012/CSA B125.1-12...

1/2" Wirsbo x 3/8" OD Qtr Turn Straight Stop- Lead Free 1/2″ F1960 pexA Inlet x 3/8″ OD compression outlet. Meets these codes:Uniform Plumbing Code, National Plumbing Code of Canada. Meets these standards: ASME A112.18.1-2012/CSA B125.1-12...

1/2" Wrot Cap 1/2" Copper Sweat "“ Wrot Copper

1/2" X 1" (C X FPT) Wrot Female Adapter 1/2" Copper Sweat X 1" Female pipe threads "“ Wrot Copper "“ IAPMO Approved "“ NSF Approved

1/2" X 1" (C X MPT) Wrot Male Adapter 1/2" Copper Sweat x 1" Male Pipe Threads "“ Wrote Copper "“ IAPMP Approved "“ NSF Approved

1/2" x 1-1/2" Galvanized Iron Nipple 150PSI. Suitable for use with schedule 40 pipe and pipe nipples.

1/2" x 1-3/4" Heavy Plain Hex Head Machine Bolt 1/2" DIAMETER. 1-3/4" LENGTH. PLAIN FINISH. FOR PIPE FLANGES. GRADE 2.

1/2" x 1/2" Brass Hose Barb Splicer 1/2" BARB (HOSE ID) X 1/2" BARB (HOSE ID)

1/2" x 1/2" MIP Poly Insert Male Adapter Made of Polypropylene. Meets ASTM D2609. Insert fittings join to PE (Polyethylene) pipe with stainless steel clamps.. Cold water use only.

1/2" x 1/2" MIP Poly Insert Male Adapter Elbow Made of Polypropylene. Meets ASTM D2609. Insert fittings join to PE (Polyethylene) pipe with stainless steel clamps.. Cold water use only.

1/2" X 1/2" X 1" (C X C X C) Wrot Tee 1/2" Copper Sweat X 1/2" Copper Sweat X 1/2" Copper Sweat "“ Wrot Copper "“ IAPMO Approved "“ NSF Approved

1/2" X 1/2" X 1/4" (C X C X C) Wrot Tee 1/2" Copper Sweat X 1/2" Copper Sweat X 1/4" Copper Sweat "“ Wrot Copper "“ IAPMO Approved "“ NSF Approved

1/2" X 1/2" X 3/4" (C X C X C) Wrot Tee 1/2" Copper Sweat X 1/2" Copper Sweat X 3/4" Copper Sweat "“ Wrot Copper "“ IAPMO Approved "“ NSF Approved

1/2" x 1/2" x 3/4" (C x C x F) Forged Tee 1/2" x 1/2" x 3/4" (C x C x F) Forged Tee - 1/2" Copper Sweat x 1/2" Copper Sweat x 3/4" Female Pipe Threads. Forged brass pressure fitting. (Forging process produces a much cleaner fitting when compared to...

1/2" X 1/2" X 3/8" (C X C X C) Wrot Tee 1/2" Copper Sweat X 1/2" Copper Sweat X 3/8" Copper Sweat "“ Wrot Copper "“ IAPMO Approved "“ NSF Approved

1/2" x 1/2" x 3/8" Flare Brass Reducing Tee 1/2" X 1/2" X 3/8" FLARE THREADS. Used with copper, brass, aluminum, welded steel tubing. Used on lines handling hard to hold liquids and gases, including gasoline, grease oil, water, vacuum lines, air lines,...

1/2" X 1/4" (C X FPT) Wrot Female Adapter 1/2" Copper Sweat X 1/4" Female pipe threads "“ Wrot Copper "“ IAPMO Approved "“ NSF Approved

1/2" X 1/4" (C X MPT) Wrot Male Adapter 1/2" Copper Sweat x 1/4" Male Pipe Threads "“ Wrote Copper "“ IAPMP Approved "“ NSF Approved

1/2" X 1/4" (CXC) Wrot Copper 90 Degree Elbow 1/2" Copper Sweat X 1/2" Copper Sweat "“ Wrot Copper "“ IAPMO Approved "“ NSF Approved

1/2" X 1/4" (CXC) Wrot Reducer Coupling 1/2" Copper Sweat X 1/4" Copper Sweat "“ Wrot Copper "“ IAPMO Approved "“ NSF Approved

1/2" X 1/4" (FTG X C) Wrot Fitting Reducer 1/2" Fitting X 1/4" Copper Sweat "“ Wrot Copper "“ IAPMO Approved "“ NSF Approved

1/2" X 1/4" (FTG X C) Wrot Flush Bushing 1/2" Fitting X 1/4" Copper Sweat "“ Wrot Copper "“ IAPMO Approved "“ NSF Approved

1/2" x 1/4" FPT Galvanized Malleable Banded Reducing 90º Elbow

1/2" x 1/4" FPT Galvanized Malleable Banded Reducing Coupling

1/2" X 1/4" X 1/2" (C X C X C) Wrot Tee 1/2" Copper Sweat X 1/4" Copper Sweat X 1/2" Copper Sweat "“ Wrot Copper "“ IAPMO Approved "“ NSF Approved

1/2" X 1/8" (C X FPT) Wrot Female Adapter 1/2" Copper Sweat X 1/8" Female pipe threads "“ Wrot Copper "“ IAPMO Approved "“ NSF Approved

1/2" X 1/8" (CXC) Wrot Reducer Coupling 1/2" Copper Sweat X 1/8" Copper Sweat "“ Wrot Copper "“ IAPMO Approved "“ NSF Approved

1/2" x 1/8" Texas Pattern Gas Ball Valve (CSA Approved) CSA APPROVED, UL LISTED. ASME B16.33 C6A3.16, ANSI Z21.15. 1-1/4"X 1-1/4" FEMALE PIPE THREADS. HEAVY FORGED BRASS CONSTRUCTION. 1/4" TURN OPERATION. LEVER HANDLE. CHROME PLATED BRASS BALL.

1/2" x 10" Galvanized Iron Nipple 150PSI. Suitable for use with schedule 40 pipe and pipe nipples.

1/2" x 100' Flat Sewer Rod Heavy Duty, Super Strong, Kink Resistant, Snake Steel  

1/2" x 12" Black Iron Nipple Meets ASTM A-53 Specs

1/2" x 12" Galvanized Iron Nipple 150PSI. Suitable for use with schedule 40 pipe and pipe nipples.

1/2" x 13 TPI Drop-in Anchor

1/2" x 2-1/2" Black Iron Nipple Meets ASTM A-53 Specs

1/2" x 2-1/4" Heavy Plain Hex Head Machine Bolt 1/2" DIAMETER. 2-1/4" LENGTH. PLAIN FINISH. FOR PIPE FLANGES. GRADE 2.

1/2" x 3" Dielectric Nipple 1/2″ MIP threads x 3″ length. Features electroplated steel casing with a non-corrosion thermoplastic lining. Max temp rating: 180 degress Fahrenheit. For use on waterheaters, filtration systems, dishwashers...

1/2" x 3" Galvanized Iron Nipple 150PSI. Suitable for use with schedule 40 pipe and pipe nipples.

1/2" x 3' Toilet Cleaning Tool ZINC PLATED STEEL. STEEL TUBE. CLOSET AUGER.