AWWA Indicator Post, Vertical

Product Highlights

• Vertical AWWA indicator post
• Adjustable from 36" to 72"
• Cast iron body
• Stainless steel operating nut
• Fusion-bonded epoxy coating
• Provides above-ground operation of compatible buried gate valves
• Provides visible valve-position indication
• Designed for compatible non-rising-stem gate valves
• UL Listed
• FM Approved
• Suitable for compatible fire-protection and water-service applications

A vertical indicator post provides an above-ground operating point for a compatible gate valve installed below grade or otherwise inaccessible for direct operation. The post connects mechanically to the valve stem or operating mechanism so the buried valve can be opened or closed from the surface.

The indicator post also provides a visible indication of valve position, allowing personnel to confirm whether the connected valve is open or closed without accessing the buried valve directly.

The vertical indicator post is adjustable from 36 inches to 72 inches, allowing the installed height to be adapted to site conditions, burial depth, finished grade, and the location of the connected valve.

Confirm the required extension, valve depth, and finished installation height before ordering and installation.

The cast iron body provides durable structural support for the indicator-post operating mechanism and enclosure. This construction is commonly used for fire-protection and water-system indicator posts because of its strength and long service history.

Inspect the body and protective coating before installation and repair any installation damage according to manufacturer recommendations.

The indicator post features a fusion-bonded epoxy coating to provide corrosion protection for the cast iron body and help extend service life in outdoor and utility environments.

Review manufacturer documentation when coating requirements, repair procedures, or project-specific corrosion-protection requirements must be verified.

The indicator post uses a stainless steel operating nut to provide a durable operating interface for opening and closing the connected valve.

Use the appropriate operating wrench or approved tool and follow manufacturer instructions for valve operation, adjustment, and maintenance.

This vertical indicator post is identified as UL Listed and FM Approved. These listings are commonly required on fire-protection equipment where system components must meet recognized third-party performance and safety requirements.

Confirm that the exact indicator-post configuration, connected valve, installation method, and system design satisfy the project specifications and applicable fire-protection requirements.

• Confirm compatibility with the intended gate valve before ordering.
• Verify that the connected valve uses a compatible non-rising-stem operating arrangement.
• Confirm the required installed height and adjustment range.
• Verify valve burial depth and finished-grade elevation before installation.
• Inspect the cast iron body, operating nut, internal mechanism, coating, and mounting components before installation.
• Position the indicator post vertically over the valve operating mechanism.
• Align the operating connection carefully to prevent binding.
• Adjust the post height according to site conditions and manufacturer instructions.
• Confirm that the OPEN and SHUT indication corresponds correctly with actual valve position.
• Operate the connected valve fully open and fully closed after installation to verify proper function.
• Do not force the operating mechanism if binding or resistance is encountered.
• Protect the indicator post from vehicle impact or other site hazards where required.
• Maintain clear access around the operating nut and visual indicators.
• Inspect the post periodically for coating damage, corrosion, mechanical damage, or operating problems.
• Installation should be completed by qualified personnel familiar with fire-protection and water-system indicator posts.