Description
ABS-71 Solvent Cement
Spears® Manufacturing ABS-71 Solvent Cement is a high-strength, medium-bodied ABS solvent cement with a fast-setting formulation designed for solvent-cement joining of compatible Type I and Type II rigid ABS pipe and fittings.
ABS-71 is suitable for all classes and schedules of compatible ABS pipe and fittings with interference-fit connections through 8" diameter. It is commonly used in drain, waste and vent systems, sewer piping, and conduit applications where a dependable ABS solvent-cement connection is required.
Product Highlights
- Fast setting
- High-strength formula
- Medium-bodied consistency
- Available in yellow or milky
- Designed for rigid ABS pipe and fittings
- Suitable for Type I and Type II ABS materials
- Commonly used for DWV, sewer, and conduit systems
- All ABS classes and schedules through 8" interference fit
Technical Specifications
| Product Type | Low VOC ABS Solvent Cement |
|---|---|
| Manufacturer | Spears® Manufacturing |
| Product Series | ABS-71 |
| Available Colors | Yellow or Milky |
| Resin | ABS |
| Body | Medium Body |
| Relative Set | Fast |
| Specific Gravity | 0.886 ± 0.04 |
| Minimum Viscosity | 500 cP @ 73 ± 2°F |
| Material Compatibility | Type I & Type II ABS |
| Maximum Pipe Size | Through 8" Interference Fit |
| Pipe Compatibility | All Classes & Schedules of Compatible ABS |
| ASTM Standard | ASTM D2235 |
| Maximum VOC Emissions | 325 g/L |
| Shelf Life | 3 Years from Date Stamped on Container |
| Listings & Certifications | NSF®-DWV, SW, U.P. Code & UL 2818 GREENGUARD GOLD; CSA B181.1 for Yellow |
ABS Pipe & Fitting Joining
ABS-71 is specifically formulated for solvent-cement joining of compatible Type I and Type II ABS plastic pipe and fittings, providing a high-strength connection for properly prepared interference-fit ABS components.
The medium-bodied consistency supports all classes and schedules of compatible ABS pipe and fittings through 8" diameter, giving installers broad coverage across common ABS piping configurations.
Fast-Setting ABS Formula
The fast-setting formulation helps support efficient assembly of compatible ABS piping systems while maintaining the high-strength characteristics required for properly prepared solvent-cement connections.
Set and cure requirements can vary with pipe size, temperature, humidity, and installation conditions, so the applicable Spears® joining instructions should be followed before the completed system is placed into service.
DWV, Sewer & Conduit Applications
ABS-71 is commonly used with compatible ABS piping in drain, waste and vent systems, sewer piping, and conduit applications, making it a versatile choice for many non-pressure ABS installations.
The yellow formulation may be required by certain codes, while the milky formulation dries clear for a cleaner finished appearance, so local requirements and the desired finished joint appearance should be considered when selecting the cement.
ABS Joining Without Primer
Spears® specifies that primer should not be used on ABS pipe and fittings when making connections with its ABS solvent cements. Proper surface preparation and solvent-cement application should instead follow the manufacturer's ABS joining procedure.
Always confirm the piping material is ABS and verify the nominal size, schedule, fitting configuration, application, and applicable plumbing or installation requirements before completing the connection.
Installation & Selection Considerations
- Check the cement before use.
- Do not use primer on ABS joints.
- Confirm Type I or Type II ABS compatibility.
- Verify the pipe size is within the 8" product limit.
- Follow Spears® joining and cure requirements before placing the system in service.
Review the supplied Spears® documents for additional ABS-71 specifications, Type I and Type II ABS compatibility, DWV and sewer applications, size limitations, product standards, storage guidance, and proper ABS solvent-cement joining information before use.
Need Help Selecting ABS Solvent Cement?
Our product specialists can help review your ABS material, pipe size, schedule, DWV, sewer or conduit application, fitting configuration, code requirements, and installation conditions before you order.
Frequently Asked Questions
What colors is ABS-71 available in?
Spears® ABS-71 is available in yellow or milky. The milky formulation dries clear for a more finished appearance, while yellow may be required by certain codes.
How fast does ABS-71 set?
ABS-71 is a fast-setting ABS solvent cement designed to support efficient assembly of properly prepared compatible ABS pipe and fitting connections.
Is ABS-71 a medium-bodied cement?
Yes. ABS-71 is a medium-bodied solvent cement with a minimum Brookfield viscosity of 500 cP at 73 ± 2°F.
What ABS materials can ABS-71 be used with?
ABS-71 is designed for compatible Type I and Type II ABS plastic pipe and fittings across all classes and schedules within the specified size range.
What size ABS pipe can ABS-71 be used with?
ABS-71 is suitable for all classes and schedules of compatible ABS pipe and fittings with interference-fit connections through 8" diameter.
Should primer be used with ABS-71?
No. Spears® specifies that primer should not be used on ABS pipe and fittings when making ABS solvent-cement connections.
Where is ABS-71 commonly used?
ABS-71 is typically used for compatible drain, waste and vent systems, sewer piping, and conduit applications requiring solvent-cement joining of ABS components.
What is the shelf life of ABS-71?
ABS-71 has a specified shelf life of three years from the date stamped on the bottom of the container when properly stored and tightly sealed between uses.
Important Ordering & Installation Notes
- Check the container date before use.
- Do not use primer on ABS connections.
- Do not add thinner to thickened cement.
- Verify ABS material and pipe size compatibility before joining.
- Allow the completed solvent-cement connection to properly cure before service.
