Spears
ABS-73 Black Solvent Cement
- SKU:
- ABS73B
- Availability:
- Usually Ships Same Day
- Weight:
- 0.00 LBS
Description
ABS-73 Black Solvent Cement
Spears® Manufacturing ABS-73 Black Solvent Cement is a high-strength, medium-bodied ABS solvent cement with a fast-setting formulation designed for solvent-cement joining of compatible Type I and Type II rigid ABS pipe and fittings.
ABS-73 is supplied in black and is suitable for all classes and schedules of compatible ABS pipe and fittings with interference-fit connections through 8" diameter. It is commonly used for drain, waste and vent systems, sewer piping, and conduit applications where a dependable ABS solvent-cement connection is required.
Product Highlights
- Black color
- Fast-setting formula
- High-strength cement
- Medium-bodied consistency
- Low VOC ABS formulation
- Designed for rigid ABS pipe and fittings
- Suitable for Type I and Type II ABS materials
- All ABS classes and schedules through 8" interference fit
Technical Specifications
| Product Type | Low VOC ABS Solvent Cement |
|---|---|
| Manufacturer | Spears® Manufacturing |
| Product Series | ABS-73 |
| Color | Black |
| Resin | ABS |
| Body | Medium Body |
| Relative Set | Fast |
| Specific Gravity | 0.890 ± 0.04 |
| Minimum Viscosity | 500 cP @ 73 ± 2°F |
| Material Compatibility | Type I & Type II ABS |
| Maximum Pipe Size | Through 8" Interference Fit |
| Pipe Compatibility | All Classes & Schedules of Compatible ABS |
| ASTM Standard | ASTM D2235 |
| Maximum VOC Emissions | 325 g/L |
| Shelf Life | 3 Years from Date Stamped on Container |
| Listings & Certifications | NSF®-DWV, SW, U.P. Code & UL 2818 GREENGUARD GOLD |
High-Strength ABS Joining
ABS-73 is specifically formulated for solvent-cement joining of compatible Type I and Type II ABS plastic pipe and fittings, providing a high-strength connection for properly prepared interference-fit ABS components.
Its medium-bodied consistency supports all classes and schedules of compatible ABS pipe and fittings through 8" diameter, providing broad coverage for common non-pressure ABS piping installations.
Fast-Setting Formula
The fast-setting formulation helps support efficient assembly of ABS pipe and fittings while providing the strength required for properly prepared solvent-cement connections in compatible systems.
Pipe size, temperature, humidity, and installation conditions can affect set and cure requirements, so the applicable Spears® joining procedures should be followed before placing the completed piping system into service.
DWV, Sewer & Conduit Applications
ABS-73 is commonly used in compatible drain, waste and vent systems, sewer piping, and conduit applications where rigid ABS pipe and fittings are joined using an interference-type socket connection.
The black formulation provides a consistent appearance with black ABS piping while maintaining the medium body and fast-setting characteristics required for proper ABS solvent-cement joining.
ABS Joining Without Primer
Spears® specifies that primer should not be used on ABS pipe and fittings when making ABS solvent-cement connections. Proper surface preparation and cement application should instead follow the manufacturer's ABS joining procedure.
Always verify that the pipe and fittings are compatible ABS materials and confirm the nominal size, schedule, application, and applicable installation requirements before beginning assembly.
Installation & Selection Considerations
- Check the cement before use.
- Do not use primer on ABS joints.
- Confirm Type I or Type II ABS compatibility.
- Verify the pipe size is within the 8" product limit.
- Follow Spears® joining and cure requirements before placing the system in service.
Review the supplied Spears® documents for additional ABS-73 specifications, Type I and Type II ABS compatibility, DWV and sewer applications, size limitations, product standards, storage guidance, and proper ABS solvent-cement joining information before use.
Need Help Selecting ABS Solvent Cement?
Our product specialists can help review your ABS material, pipe size, schedule, DWV, sewer or conduit application, fitting configuration, code requirements, and installation conditions before you order.
Frequently Asked Questions
What color is ABS-73 Solvent Cement?
Spears® ABS-73 is supplied in black, providing a consistent appearance when used with compatible black ABS pipe and fittings.
How fast does ABS-73 set?
ABS-73 is a fast-setting ABS solvent cement designed to support efficient assembly of properly prepared compatible ABS pipe and fitting connections.
Is ABS-73 a medium-bodied cement?
Yes. ABS-73 is a medium-bodied solvent cement with a minimum Brookfield viscosity of 500 cP at 73 ± 2°F.
What ABS materials can ABS-73 be used with?
ABS-73 is formulated for compatible Type I and Type II ABS plastic pipe and fittings across all classes and schedules within its specified size range.
What size ABS pipe can ABS-73 be used with?
ABS-73 is suitable for all classes and schedules of compatible ABS pipe and fittings with interference-fit connections through 8" diameter.
Should primer be used with ABS-73?
No. Spears® specifies that primer should not be used on ABS pipe and fittings when making ABS solvent-cement connections.
Important Ordering & Installation Notes
- Check the container date before use.
- Do not use primer on ABS connections.
- Do not add thinner to thickened cement.
- Verify ABS material and pipe size compatibility before joining.
- Allow the completed solvent-cement connection to properly cure before service.
