Spears
3/4" x 1/2" x 3/4" Schedule 80 CPVC Reducing Tee (SOC x FPT x SOC)
- SKU:
- 803-095C
- Availability:
- Usually Ships Same Day
- Weight:
- 0.15 LBS
Description
3/4" x 1/2" x 3/4" Schedule 80 CPVC Reducing Tee (SOC x FPT x SOC)
3/4" x 1/2" x 3/4" Schedule 80 CPVC Reducing Tee (SOC x FPT x SOC) provides a three-way connection with 3/4" socket run connections and a reduced 1/2" Female Pipe Thread branch. The mixed-connection design combines solvent-cement and threaded interfaces within one compact CPVC fitting.
The 3/4" x 1/2" x 3/4" reducing tee maintains the 3/4" CPVC main run while providing a 1/2" threaded branch connection. Selection should account for all three connection sizes, thread compatibility, branch orientation, adjoining CPVC pipe, and system requirements.
Product Highlights
- CPVC construction
- Schedule 80 design
- Reducing tee configuration
- 3/4" socket run connections
- 1/2" Female Pipe Thread branch
- SOC x FPT x SOC configuration
- Combines solvent-cement and threaded interfaces
- Provides a compact reduced threaded branch transition
Technical Specifications
| Product Type | Reducing Tee |
|---|---|
| Material | CPVC |
| Schedule | Schedule 80 |
| Nominal Size | 3/4" x 1/2" x 3/4" |
| Configuration | Reducing Tee |
| Connection | Socket x Female Pipe Thread x Socket |
| Run Connections | 3/4" Socket x 3/4" Socket |
| Branch Connection | 1/2" Female Pipe Thread |
| Joining Method | CPVC Solvent-Cement and Threaded Connections |
| Primary Function | Provide a 1/2" Female-Threaded Branch from a 3/4" CPVC Main Run |
Reducing Tee Design
The 3/4" x 1/2" x 3/4" reducing tee design provides a 3/4" straight-through CPVC run with a smaller 1/2" female-threaded branch connection. This combines both branch reduction and connection transition within one fitting.
The specific order of the three connection sizes should be confirmed before ordering. Proper branch orientation should also be established before the solvent-cement socket connections are assembled.
3/4" Socket Run Connections
The 3/4" socket connections maintain the straight-through CPVC piping run. Each socket accepts appropriately sized compatible 3/4" CPVC pipe for solvent-cement joining.
Pipe ends and fitting sockets should be clean and properly prepared before assembly. Compatible CPVC primer, solvent cement, insertion procedures, and required cure times should be followed for both socket connections.
1/2" Female Threaded Branch
The 1/2" Female Pipe Thread branch provides the reduced threaded connection at the center outlet. It accepts an appropriately sized compatible 1/2" male-threaded component.
Thread compatibility should be verified before assembly. Appropriate threaded plastic-piping procedures should be used while avoiding excessive tightening that could place unnecessary stress on the CPVC tee.
Schedule 80 CPVC Application
A 3/4" x 1/2" x 3/4" Schedule 80 CPVC Reducing Tee provides a compact mixed-connection branch transition for compatible CPVC piping systems. Its design can reduce the number of separate adapters required at the branch connection.
System temperature, pressure, fluid compatibility, joining requirements, and applicable installation standards should be reviewed for the intended application. Proper piping support and alignment should be maintained around the fitting.
Installation & Selection Considerations
- Confirm all three sizes.
- Verify SOC x FPT x SOC.
- Confirm the 1/2" branch.
- Check male-thread compatibility.
- Avoid excessive threaded tightening.

Our piping specialists can help review all three connection sizes, the 1/2" threaded branch, socket compatibility, CPVC requirements, and installation considerations before you order.
Frequently Asked Questions
What is this 3/4" x 1/2" x 3/4" CPVC Reducing Tee used for?
It provides a 1/2" female-threaded branch connection from a 3/4" Schedule 80 CPVC main piping run.
What are the connection sizes?
The fitting has two 3/4" socket run connections and one 1/2" Female Pipe Thread branch connection.
What does SOC x FPT x SOC mean?
It identifies a socket connection, Female Pipe Thread branch, and second socket connection in the stated order.
What connects to the 1/2" FPT branch?
The 1/2" Female Pipe Thread branch accepts an appropriately sized compatible male-threaded component.
How are the 3/4" socket connections joined?
The socket connections are designed for compatible CPVC solvent-cement joining using appropriate preparation and installation procedures.
What should I confirm before ordering?
Confirm the 3/4" x 1/2" x 3/4" size configuration, SOC x FPT x SOC connections, male-thread compatibility, and intended branch orientation.
Important Ordering & Installation Notes
- Confirm all three sizes.
- Verify SOC x FPT x SOC.
- Confirm the 1/2" branch size.
- Avoid excessive threaded tightening.
- Use compatible CPVC joining materials and procedures.