Dixon
W-Series Wingstyle Hydraulic Quick Disconnect Female Coupler
- SKU:
- NLDIX8WF8-B
- Availability:
- Limited quantity available.
- Weight:
- 2.00 LBS
Description
W-Series Wingstyle Hydraulic Quick Disconnect Female Coupler
W-Series Wingstyle Hydraulic Quick Disconnect Female Coupler provides a high-pressure connection for hydraulic systems that require secure threaded coupling and controlled connection under residual pressure.
The wing-nut design allows the mating plug to be drawn into the coupler mechanically, making the connection well suited to wet-line and equipment applications where ordinary push-to-connect couplings may be difficult to engage.
Product Highlights
Dixon 8WF8-B is a 1" brass W-Series wingstyle hydraulic coupler with female NPTF threads.
Designed for high-pressure hydraulic connections where residual pressure may be present during coupling.
Technical Specifications
Wingstyle Coupler x Female NPTF Configuration
The wing-nut coupling mechanism draws a compatible W-Series plug into position and supports connection where residual hydraulic pressure may be present.
The threaded connection installs onto compatible male NPTF hose ends, piping, manifolds, or hydraulic equipment.
W-Series Wingstyle Coupler Design
Dixon designs the W-Series for hydraulic applications where the coupling may need to be connected while residual pressure remains in the circuit. The threaded wing-nut design mechanically draws the mating plug into the coupler instead of relying solely on manual push force.
This configuration is widely used on dump-trailer wet-line systems and oil-field equipment where pressure can remain trapped after shutdown. Dixon still recommends de-energizing the hydraulic power supply during connection whenever operating conditions permit.
The main coupler valve uses a bonded face seal intended to improve sealing integrity during pressurized connection and disconnection. Dixon also incorporates a redundant O-ring on the coupler body that engages the mating nipple as a secondary sealing point.
An anti-extrusion seal package and valve-sleeve backup ring support the sealing components during high-pressure operation. These internal details are intended to improve service life while limiting spillage and air inclusion during normal coupling operation.
The 8WF8-B uses a brass coupler body with machined components produced from solid bar stock. Dixon pairs the body with a rugged steel wing nut that provides the mechanical leverage used during connection and disconnection.
Stainless steel retaining rings and springs are incorporated into the assembly to improve corrosion resistance in key internal areas. Inspect the wing nut, threads, valve, and mating surfaces regularly for wear or contamination.
Dixon rates the 8WF8-B for a maximum operating pressure of 4,000 PSI and a burst pressure of 16,000 PSI. The published flow value is 52 GPM at a 32 PSI pressure drop for this 1" body-size configuration.
The W-Series is not recommended for continuous hydraulic impulse applications at rated pressure. System design should account for pressure cycling, connected hose ratings, hydraulic fluid compatibility, and the operating limits of every component in the circuit.
Installation & Selection Considerations
Confirm Dixon part number 8WF8-B.
Verify the 1" body size.
Confirm 1" female NPTF threads.
Inspect seals and wing nut before use.
De-energize hydraulics when possible.

Our product specialists can help review 8WF8-B compatibility, body size, female NPTF connection, hydraulic pressure requirements, seal material, and mating W-Series components before you order.
Frequently Asked Questions
What is the Dixon 8WF8-B?
The 8WF8-B is a 1" brass W-Series wingstyle hydraulic quick-disconnect coupler with female NPTF threads.
Can this coupler connect under residual pressure?
Yes. Dixon designed the W-Series for applications where residual hydraulic pressure may be present, although de-energizing the system before connection is recommended whenever possible.
What is the maximum operating pressure?
Dixon rates the 8WF8-B for a maximum operating pressure of 4,000 PSI.
What seal material does it use?
Dixon specifies nitrile rubber seals as standard for the 8WF8-B.
What hydraulic applications commonly use the W-Series?
Dixon identifies dump-trailer wet-line systems and oil-field equipment as common W-Series applications.
Is the W-Series recommended for continuous hydraulic impulse service?
No. Dixon states that W-Series couplings are not recommended for continuous hydraulic impulse applications at rated pressures.
Important Ordering & Installation Notes
- Confirm Dixon part number 8WF8-B.
- Verify the 1" body size.
- Confirm female NPTF connection.
- Check nitrile seal compatibility.
- Verify mating W-Series components.
- Do not exceed 4,000 PSI working pressure.
- De-energize hydraulic power when possible.
- Keep sealing surfaces free of debris.
- Inspect the wing nut before connection.
- Avoid continuous hydraulic impulse service.