Dixon
ISO-B Hydraulic Quick Disconnect Female Coupler
- SKU:
- NLDIX8HF8
- Availability:
- Limited quantity available.
- Weight:
- 3.00 LBS
Description
ISO-B Hydraulic Quick Disconnect Female Coupler
ISO-B Hydraulic Quick Disconnect Female Coupler provides a high-pressure female quick-disconnect connection for compatible hydraulic hose, piping, and equipment systems.
The Dixon 8HF8 combines a 1" ISO 7241 Series B coupler interface with a 1" female NPTF connection. Steel construction, a poppet-style shutoff valve, and nitrile sealing components support demanding hydraulic service where repeatable connection and disconnection are required.
Product Highlights
Dixon 8HF8 is a 1" steel H-Series hydraulic coupler designed to meet ISO 7241 Series B dimensional requirements.
The female NPTF connection and poppet shutoff design support secure high-pressure hydraulic system connections.
Technical Specifications
ISO-B Coupler x Female NPTF Configuration
The coupler side accepts a compatible ISO-B plug and uses a poppet-style valve to provide shutoff when the connection is separated.
The threaded end connects to compatible male NPTF hose fittings, piping, manifolds, valves, or hydraulic equipment.
H-Series ISO-B Coupler Design
The 8HF8 is manufactured to meet the dimensional requirements of ISO 7241 Series B. This standardized profile allows the coupler to connect with compatible Series B plugs from approved interchange families.
Dixon lists interchange compatibility with several established hydraulic quick-disconnect product lines. Body size and interchange standard should both be confirmed before connecting components because similar-looking hydraulic couplers may use different profiles.
The H-Series coupler uses a poppet-style shutoff valve that closes when the mating plug is disconnected. This helps limit hydraulic fluid loss and reduces the amount of contamination that can enter through an open fluid passage.
Valve surfaces should remain clean and move freely during coupling operation. Inspect the coupler nose, valve area, and mating plug before connection so debris or visible damage does not interfere with engagement or sealing.
Dixon manufactures the 8HF8 from steel and rates the coupler for a maximum operating pressure of 4,000 PSI. The published burst pressure is 16,000 PSI, providing a substantial structural margin above the normal working-pressure rating.
Steel components receive a trivalent chrome plating treatment, while stainless steel balls, retaining rings, and springs are used in key internal areas. System pressure should always remain within the rating of the lowest-rated component in the complete hydraulic assembly.
Nitrile seals are standard in the H-Series, and the coupler uses a redundant O-ring sealing system with a PTFE backup ring. Dixon also crimps valve seals in place to help maintain seal integrity during high-flow and pressurized connection conditions.
The 8HF8 is rated for temperatures from -40°F to 250°F. Hydraulic fluid, hoses, adapters, seals, and connected equipment should also be reviewed because the overall system temperature capability is determined by the most restrictive component.
Installation & Selection Considerations
Confirm Dixon part number 8HF8.
Verify the 1" ISO-B body size.
Confirm 1" female NPTF threads.
Inspect the valve and seals.
Verify system pressure requirements.

Our product specialists can help review 8HF8 compatibility, ISO 7241 Series B interchange, 1" female NPTF sizing, hydraulic pressure requirements, and mating quick-disconnect components before you order.
Frequently Asked Questions
What size is the Dixon 8HF8 coupler?
Dixon specifies a 1" body size with a 1" - 11-1/2 female NPTF threaded connection.
What interchange standard does the 8HF8 meet?
The 8HF8 meets the dimensional requirements of ISO 7241 Series B.
What material is the 8HF8 made from?
Dixon specifies steel construction with plated steel components and stainless steel internal hardware in key areas.
What is the maximum operating pressure?
Dixon rates the 8HF8 for a maximum operating pressure of 4,000 PSI.
What type of valve does the coupler use?
The H-Series uses a poppet-style shutoff valve that closes when the quick-disconnect connection is separated.
What temperature range does Dixon specify?
Dixon lists a temperature range of -40°F to 250°F (-40°C to 121°C) for the 8HF8.
Important Ordering & Installation Notes
- Confirm Dixon part number 8HF8.
- Verify the 1" body size.
- Confirm ISO 7241 Series B interchange.
- Verify the female NPTF thread size.
- Inspect sealing surfaces before use.
- Do not exceed 4,000 PSI working pressure.
- Keep the valve area free of contamination.
- Use suitable NPTF installation practices.
- Verify complete coupler engagement.
- Confirm all system component ratings.