Merit Brass
Stainless Press 45° Elbow
- SKU:
- P6E2
- Availability:
- Usually Ships Same Day
- Weight:
- 0.00 LBS
Description
Stainless Press 45° Elbow
Merit Stainless Press 45° Elbows are designed to change the direction of compatible stainless steel piping by 45 degrees using a press connection. The fitting provides a gradual directional transition without requiring threaded assembly or welding at the joint.
Merit Stainless Steel Press Fittings are designed for use with Schedule 5 or Schedule 10 Type 304/304L or 316/316L stainless steel pipe conforming to ASTM A-312. The stated working pressure range is from full vacuum to 300 PSI (20.7 bar) on Schedule 5 and Schedule 10 stainless steel pipe.
Product Highlights
- Stainless steel press 45° elbow
- Changes piping direction by 45 degrees
- Press-connect installation
- Designed for Schedule 5 and Schedule 10 stainless steel pipe
- Compatible with Type 304/304L stainless steel pipe
- Compatible with Type 316/316L stainless steel pipe
- Designed for ASTM A-312 stainless steel pipe
- Working pressure range from full vacuum to 300 PSI
- Maximum stated working pressure: 300 PSI / 20.7 bar
- No threaded pipe joint required
- No welding required for the fitting connection
- Manufacturer approvals, dimensional information, tooling guidance, and compatibility documentation available below
45° Elbow Design
A press 45° elbow redirects compatible stainless steel piping through a gradual 45-degree turn while maintaining a mechanical press connection at each end.
The press design allows the fitting to be installed without cutting pipe threads or welding the fitting into place. Properly prepared pipe is inserted into the fitting and the connection is completed using compatible press tooling.
This configuration is useful for offsets, gradual routing changes, and applications where a full 90-degree turn is not required.
Technical Specifications
| Product Type | Press 45° Elbow |
|---|---|
| Material | Stainless Steel |
| Connection Type | Press |
| Angle | 45° |
| Compatible Pipe Material | 304/304L or 316/316L Stainless Steel |
| Compatible Pipe Schedule | Schedule 5 or Schedule 10 |
| Pipe Standard | ASTM A-312 |
| Working Pressure Range | Full Vacuum to 300 PSI |
| Maximum Working Pressure | 300 PSI / 20.7 bar |
| Primary Function | Changing Piping Direction by 45 Degrees |
Compatible Stainless Steel Pipe
304 / 304L Stainless Steel
- Compatible pipe material identified by Merit
- Schedule 5 or Schedule 10 pipe
- Pipe must conform to ASTM A-312
- Verify pipe outside diameter and condition before installation
- Confirm chemical compatibility for the intended media
316 / 316L Stainless Steel
- Compatible pipe material identified by Merit
- Schedule 5 or Schedule 10 pipe
- Pipe must conform to ASTM A-312
- Suitable where the specified system requires 316/316L pipe
- Confirm chemical compatibility for the intended media
Press Connection Benefits
Mechanical Press Installation
- Uses compatible press tooling
- No threaded joint required
- No fitting weld required
- Supports repeatable mechanical connections
- Suitable for compatible stainless steel piping systems
45° Direction Change
- Provides a gradual directional transition
- Useful for piping offsets
- Helps route pipe around obstructions
- Can be used where a 90° turn is too abrupt
- Combines direction change with press connectivity
45° Elbow vs. 90° Elbow
45° Elbow
- Provides a shallower directional change
- Changes piping direction by 45 degrees
- Useful for offsets and gradual routing changes
- Can be used in pairs for offset piping
- This product configuration
90° Elbow
- Provides a full right-angle turn
- Changes piping direction by 90 degrees
- Useful where a sharper turn is required
- Common in compact piping layouts
- Different angle from this fitting
Pressure Range
Merit states that its Stainless Steel Press Fittings have a working pressure range from full vacuum to 300 PSI (20.7 bar) when installed on compatible Schedule 5 or Schedule 10 stainless steel pipe.
System suitability should be confirmed based on pipe size, pipe material, temperature, conveyed media, seal compatibility, installation method, and the applicable Merit Stainless Press documentation.
Common Applications
Commercial & Mechanical Piping
- Stainless steel piping systems
- Offset piping arrangements
- Equipment connections
- Utility piping
- Mechanical system installations
Industrial & Process Service
- Process piping systems
- Compatible liquid-service applications
- Equipment piping
- Maintenance and retrofit work
- Applications requiring stainless press connections
Installation & Selection Guidance
- Confirm the required nominal fitting size before ordering.
- Use only compatible Schedule 5 or Schedule 10 stainless steel pipe.
- Confirm pipe is Type 304/304L or 316/316L stainless steel as required.
- Verify that the pipe conforms to ASTM A-312.
- Confirm the fitting and pipe outside diameters are compatible.
- Inspect and properly prepare the pipe ends before installation.
- Insert the pipe to the required depth before pressing.
- Use compatible press tooling and jaws approved for the Merit Stainless Press system.
- Follow the applicable pressing sequence and tooling instructions.
- Confirm the 45-degree fitting orientation before making the final press connections.
- Confirm system media compatibility using the Merit chemical compatibility chart.
- Verify that the full-vacuum-to-300-PSI working range is suitable for the intended system.
- Review applicable approvals and submittal requirements before specifying the fitting.
- Installation should follow Merit instructions and applicable piping codes and project requirements.
Important Ordering Notes
- Product is a stainless steel press 45° elbow.
- Designed to change piping direction by 45 degrees.
- Designed for Schedule 5 or Schedule 10 stainless steel pipe.
- Compatible pipe materials identified as 304/304L and 316/316L stainless steel.
- Compatible pipe must conform to ASTM A-312.
- Working pressure range is stated as full vacuum to 300 PSI / 20.7 bar.
- Confirm nominal fitting size before ordering.
- Verify pipe material, schedule, outside diameter, and condition before installation.
- Confirm fitting orientation before completing press connections.
- Confirm media compatibility using the manufacturer chemical compatibility chart.
- Use compatible Merit Stainless Press tooling.
- Review approvals, dimensional information, tooling requirements, and submittals before installation.
Product Documents
Frequently Asked Questions
What is a stainless press 45° elbow used for?
It is used to change the direction of a compatible stainless steel piping run by 45 degrees.
What pipe is this elbow designed for?
Merit identifies the Stainless Press system for Schedule 5 or Schedule 10 Type 304/304L or 316/316L stainless steel pipe conforming to ASTM A-312.
What is the working pressure range?
The stated working pressure range is from full vacuum to 300 PSI (20.7 bar) on compatible Schedule 5 and Schedule 10 stainless steel pipe.
Does this fitting require welding?
No fitting weld is required for the press connection. The fitting is mechanically pressed onto compatible stainless steel pipe using the appropriate tooling.
Does this fitting use threads?
No. This elbow uses press connections rather than threaded connections.
Can this fitting be used with both 304 and 316 stainless steel pipe?
The supplied Merit information identifies Type 304/304L and 316/316L stainless steel pipe as compatible when the pipe also meets the specified schedule and ASTM A-312 requirements.
What pipe schedules are compatible?
The supplied information identifies Schedule 5 and Schedule 10 stainless steel pipe.
How is a 45° elbow different from a 90° elbow?
A 45° elbow provides a more gradual directional change, while a 90° elbow creates a full right-angle turn.
Where can I find dimensions?
Use the Merit Stainless Press Dimensional Catalog in the Product Documents section above.
Where can I check chemical compatibility?
Use the Merit Stainless Press Chemical Compatibility Chart in the Product Documents section above.
Where can I find compatible press tooling?
Use the Merit Stainless Press Tooling document in the Product Documents section above.
Ask Willy: Product Selection & Support
Our GetPipe.com team can help review sizing, material, connection requirements, and product information before you order.
