Description
SCI® Press - Copper End Cap
SCI® Press Copper End Cap Fig. SP600 provides a reliable mechanical press closure for terminating the end of compatible copper tubing.
Designed for commercial, industrial, and residential piping systems, the SP600 provides a compact copper press connection for closing off the end of a piping run without conventional soldering or brazing.
Product Highlights
- SCI® Press Fig. SP600
- Copper end cap construction
- Single press connection
- EPDM press sealing element
- Designed to terminate copper tubing
- Compatible with common press tools
Technical Specifications
| Product Type | Copper Press End Cap |
|---|---|
| Brand | SCI® Press |
| Manufacturer | ASC Engineered Solutions |
| Figure | SP600 |
| Material | Copper |
| Connection | Press |
| Configuration | End Cap |
| Seal Material | EPDM |
| Compatible Hard Tubing | ASTM B88 Types K, L, and M |
| Installation Method | Mechanical Press Connection |
| Primary Function | Terminate a Copper Piping Run |
Construction Details
SCI Press Fig. SP600 is a copper press end cap designed to provide a secure termination point at the end of compatible copper tubing.
SCI Press Copper Fittings are intended for ASTM B88 Types K, L, and M hard copper tubing and compatible soft copper tubing within the manufacturer's specified range.
The press connection incorporates an EPDM sealing element and uses mechanical press technology, providing a flameless alternative to conventional soldered or brazed copper connections.
Design & Typical Applications
End Cap Design
- Single press connection
- Closed-end configuration
- Copper fitting construction
- EPDM sealing element
- Compact termination design
Typical Applications
- Commercial plumbing systems
- Residential plumbing systems
- Industrial copper piping
- Mechanical piping systems
- Copper line terminations
Installation & Selection Considerations
- Confirm the copper tubing size.
- Prepare the tube end properly.
- Check the EPDM seal condition.
- Use compatible pressing equipment.
- Pressure test after installation.
Use the SCI Press Copper Fittings Submittal, Installation Instructions, and Copper Press Flyer to confirm Fig. SP600 specifications, copper tubing compatibility, press-tool requirements, and proper installation procedures.
Need Help Selecting an SCI® Press Copper End Cap?
Need help confirming the copper tubing size, EPDM seal compatibility, or press-tool requirements? The GetPipe.com Team can help you select the correct SCI Press copper end cap.
Frequently Asked Questions
What is the SCI Press Copper End Cap used for?
It is designed to close and terminate the end of compatible copper tubing in a press piping system.
What figure identifies the SCI Press Copper End Cap?
ASC Engineered Solutions identifies the SCI Press Copper End Cap as Fig. SP600.
What type of connection does the SP600 use?
The SP600 uses a mechanical copper press connection.
What copper tubing is compatible with SCI Press fittings?
SCI Press Copper Fittings are intended for ASTM B88 Types K, L, and M hard copper tubing and compatible soft copper tubing within the manufacturer's specified range.
What sealing element is used in the SP600?
The SCI Press Copper End Cap uses an EPDM sealing element at the press connection.
Does the SP600 require soldering or brazing?
No. The end cap uses mechanical press technology without conventional soldering or brazing at the connection.
Can standard press tools be used?
SCI Press Copper technology is designed for compatibility with common pressing tools and jaws when used according to the manufacturer's instructions.
What should I confirm before ordering?
Confirm the copper tubing size, system requirements, seal compatibility, and pressing equipment required for the installation.
Important Ordering & Installation Notes
- Confirm the copper tubing size.
- Inspect the sealing element.
- Follow SCI installation instructions.
- Use compatible press tools.
- Pressure test completed connections.
