Spears
Schedule 40 PVC 90° Street Elbow (MPT x SOC)
- Availability:
- Usually Ships Same Day
- Weight:
- 0.00 LBS
Description
Schedule 40 PVC 90° Street Elbow (MPT x SOC)
Schedule 40 PVC 90° Street Elbow (MPT x SOC) provides a right-angle directional change while transitioning between a male pipe-thread connection and a socket connection. The male threaded end engages a compatible female-threaded component, while the socket end receives appropriately sized compatible PVC pipe.
The MPT x Socket street-elbow configuration combines threaded and solvent-cement connection methods within one Schedule 40 PVC fitting. Selection should account for nominal size, Schedule 40 PVC compatibility, mating female threads, socket requirements, required 90-degree direction, connection orientation, adjoining component alignment, and available installation clearance.
Product Highlights
- PVC construction
- Schedule 40 design
- 90-degree street elbow
- MPT x socket connection
- Provides a right-angle transition
- Combines threaded and socket connections
- Connects PVC pipe to a female-threaded component
- Supports mixed-connection transitions in Schedule 40 PVC piping
Technical Specifications
| Product Type | 90-Degree Street Elbow |
|---|---|
| Material | PVC |
| Schedule | Schedule 40 |
| Direction Change | 90 Degrees |
| Connection | Male Pipe Thread (MPT) x Socket (SOC) |
| Connection Count | Two |
| Threaded Interface | Compatible Female Pipe Thread |
| Socket Interface | Compatible PVC Pipe |
| Fitting Configuration | Mixed-Connection Street Elbow |
| Connection Style | Male-Thread-to-Socket Transition |
| Joining Methods | Threaded Mechanical and Solvent-Cement Socket Connections |
| Primary Function | Provide a 90-Degree Male-Thread-to-Socket Transition |
90-Degree Street Elbow Design
The 90-degree street elbow configuration redirects the piping route through a right-angle turn while providing different connection styles at the two fitting ends. This arrangement allows a compatible female-threaded component and socket-connected PVC pipe to meet at a single directional transition without requiring identical connection methods.
The required elbow direction should be established before final assembly so the threaded and socket ends finish in their intended positions. Planning the orientation in advance also helps maintain proper access around the connections and keeps adjoining components naturally aligned with the completed right-angle piping route.
MPT x Socket Connections
The MPT x Socket connections combine an externally threaded interface for a compatible female-threaded component with a receiving socket for appropriately sized PVC pipe. This mixed-end arrangement provides a direct transition between a mechanical threaded connection and a solvent-cement PVC connection within the elbow.
Each end requires the installation method appropriate to its connection style, so the threaded and socket sides should be prepared independently. Careful thread engagement, proper PVC pipe preparation, compatible joining materials, and correct component alignment help maintain the intended elbow position throughout assembly.
Schedule 40 PVC Integration
The Schedule 40 PVC construction allows the street elbow to integrate into compatible Schedule 40 PVC piping arrangements requiring a mixed-connection right-angle transition. Matching the socket side to the proper PVC pipe and the MPT side to the appropriate female-threaded component helps establish the intended connection sequence.
Application suitability should be evaluated using the requirements of the complete piping system rather than the schedule designation alone. Intended service conditions, adjoining materials, thread compatibility, joining materials, connected components, piping support, and applicable installation practices should all be considered during fitting selection.
Mixed-Connection Piping Layout
A Schedule 40 PVC 90° Street Elbow with MPT x Socket connections combines a direction change and connection-style transition within one fitting. This can simplify piping layouts where compatible PVC pipe must turn through 90 degrees and connect directly with a suitable female-threaded component at the same location.
Installation planning should consider thread engagement, socket insertion space, elbow orientation, nearby fittings, and independent support for adjoining components. The pipe and threaded connection should approach the elbow in proper alignment so neither end is used to pull an offset piping arrangement into position.
Installation & Selection Considerations
- Confirm the nominal size.
- Verify the 90-degree direction.
- Match the mating female thread.
- Check Schedule 40 PVC compatibility.
- Confirm the MPT x socket connection orientation.
Our PVC fitting specialists can help review your nominal size, Schedule 40 requirements, MPT x Socket configuration, mating female-threaded component, adjoining PVC pipe, required 90-degree direction, connection orientation, joining requirements, and available installation clearance before you order.
Frequently Asked Questions
What is a Schedule 40 PVC 90° Street Elbow used for?
It provides a 90-degree directional change while transitioning between a compatible female-threaded component and socket-connected PVC pipe.
What does MPT x SOC mean?
MPT x SOC identifies a Male Pipe Thread connection on one end and a socket connection on the opposite end.
What connects to the MPT end?
The male-threaded end engages an appropriately sized compatible female pipe-threaded component.
What connects to the socket end?
The socket receives appropriately sized compatible PVC pipe for the applicable solvent-cement joining procedure.
How much does this elbow change direction?
The fitting redirects the piping arrangement through 90 degrees to create a right-angle transition.
Does each end use the same joining method?
No. The MPT side uses a threaded mechanical connection, while the socket side uses an applicable PVC solvent-cement joining procedure.
Should the elbow orientation be planned before assembly?
Yes. Establish the required direction and identify the threaded and socket positions before completing the permanent connections.
What should I confirm before ordering?
Confirm the nominal size, Schedule 40 PVC requirement, MPT x Socket configuration, mating female thread, required direction, adjoining PVC pipe, and installation layout.
Important Ordering & Installation Notes
- Inspect both ends before use.
- Prepare the pipe end correctly.
- Start the male thread carefully by hand.
- Use compatible PVC joining materials.
- Support adjoining components independently.
