Lesso America
PVC DWV Sanitary Street Tee (SPG x HUB x HUB)
- SKU:
- LP403
- Availability:
- Usually Ships Same Day
- Weight:
- 0.00 LBS
Description
PVC DWV Sanitary Street Tee (SPG x HUB x HUB)
PVC DWV Sanitary Street Tees provide a compact branch connection for non-pressure drain, waste, and vent piping systems.
Featuring one spigot (SPG) connection and two hub connections, this fitting can install directly into a compatible hub fitting while also accepting compatible PVC DWV pipe at the remaining openings. The street-style configuration helps reduce the need for an additional coupling while maintaining the branch geometry required for compatible residential, commercial, and institutional DWV systems.
Product Highlights
- PVC DWV sanitary street tee
- Spigot x Hub x Hub connection configuration
- Creates a branch connection in DWV piping
- Spigot end fits directly into a compatible hub fitting
- Two hub ends accept compatible PVC DWV pipe
- Street-style design can reduce additional couplings
- Designed for non-pressure drain, waste, and vent systems
- Solvent-weld installation
- Smooth internal surfaces support efficient drainage flow
- Durable corrosion-resistant PVC construction
- Suitable for residential, commercial, and institutional DWV systems
Technical Specifications
| Product Type | DWV Sanitary Street Tee |
|---|---|
| Material | PVC |
| Connection Type | Spigot (SPG) x Hub x Hub |
| Joint Method | Solvent Weld |
| System Type | Drain, Waste & Vent (DWV) |
| Pressure Service | Non-Pressure |
| Primary Function | Compact Branch Connection |
| Referenced Standards | ASTM D2665, ASTM D1784, CSA B181.2, and Applicable NSF/ANSI Standards |
| Typical Applications | Residential, Commercial, and Institutional DWV Systems |
Connection Configuration
Spigot End
The SPG end is designed to fit directly into a compatible PVC hub fitting for a compact solvent-weld connection.
Branch Hub
The branch hub accepts compatible PVC DWV pipe for the branch connection in the piping system.
Run Hub
The remaining hub accepts compatible PVC DWV pipe to continue the main run.
Construction Details
The fitting is manufactured from durable PVC for resistance to corrosion, chemicals, moisture, and long-term wear in compatible drain, waste, and vent systems.
The combination of one spigot end and two hub connections allows direct fitting-to-fitting installation while maintaining secure solvent-welded joints.
Smooth internal surfaces help maintain efficient drainage flow and reduce unnecessary restriction through the branch connection.
Why Choose a Sanitary Street Tee?
Compact Branch Connection
- Adds a branch to a compatible DWV system
- Spigot end installs directly into another hub
- Can reduce the need for an extra coupling
- Useful where installation space is limited
- Suitable for new installations and repairs
PVC DWV Construction
- Corrosion-resistant material
- Lightweight construction
- Resistant to many common plumbing chemicals
- Designed for solvent-weld assembly
- Suitable for long-term non-pressure service
Typical Applications
Residential DWV Systems
- Fixture drain connections
- Waste piping branches
- Vent piping layouts
- Building drainage systems
- Compact plumbing configurations
Commercial & Institutional DWV
- Commercial drainage systems
- Building waste piping
- Branch drainage connections
- Repair and retrofit work
- Institutional plumbing systems
Solvent-Weld Installation
Clean and prepare all mating PVC surfaces according to accepted solvent-weld procedures. Apply compatible PVC primer and solvent cement where required.
Insert the spigot end fully into the mating hub fitting and seat compatible PVC DWV pipe into the two hub connections. Confirm branch orientation before the solvent cement begins to set.
Allow all completed joints to cure according to the solvent-cement manufacturer's recommendations before placing the system into normal service.
Our plumbing specialists can help review your pipe size, branch layout, spigot and hub connections, and DWV installation requirements before you order.
Email the GetPipe.com Team Visit Quick SupportFrequently Asked Questions
What is a PVC DWV sanitary street tee?
It is a sanitary tee with one spigot connection and two hub connections, designed to create a compact branch connection in compatible DWV piping.
What does SPG mean?
SPG means spigot. The spigot end is designed to fit directly into a compatible hub fitting.
What does HUB mean?
Hub refers to a socket connection designed to accept compatible PVC DWV pipe for solvent-weld installation.
How is a sanitary street tee different from a standard sanitary tee?
A standard sanitary tee typically has hubs on all three openings, while the street version uses a spigot connection on one opening.
Why use the street-style configuration?
The spigot end can connect directly into another hub fitting, which may eliminate the need for an additional coupling or short pipe section.
How is the fitting installed?
The spigot and hub connections are installed using compatible PVC solvent-weld procedures.
Is this fitting intended for pressure piping?
No. This fitting is intended for non-pressure drain, waste, and vent applications.
What material is the fitting made from?
The sanitary street tee is manufactured from durable, corrosion-resistant PVC.
What standards are referenced for this fitting?
The supplied product information references ASTM D2665, ASTM D1784, CSA B181.2, and applicable NSF/ANSI standards.
What should I verify before ordering?
Confirm the nominal pipe size, Spigot x Hub x Hub configuration, branch requirements, and compatibility with the intended PVC DWV system.
Important Ordering & Installation Notes
- This listing is for a PVC DWV Sanitary Street Tee with SPG x HUB x HUB connections.
- Verify the required nominal pipe size before ordering.
- The spigot end fits directly into a compatible PVC hub fitting.
- The two hub ends accept compatible PVC DWV pipe.
- The fitting is designed to create a branch connection in a DWV piping system.
- The street configuration may reduce the need for an additional coupling.
- Designed for non-pressure drain, waste, and vent applications.
- Use compatible PVC primer and solvent cement where required.
- Clean and prepare all mating surfaces before solvent welding.
- Fully seat all connections during assembly.
- Confirm branch orientation before the solvent cement begins to set.
- Allow completed joints to cure according to the cement manufacturer's recommendations.
- Do not use this fitting for pressure applications.
- Verify applicable plumbing code and standards requirements before installation.
- Follow manufacturer installation recommendations.
